137 lines
4 KiB
Arduino
137 lines
4 KiB
Arduino
|
/**
|
||
|
|
* @file USBMSC.ino
|
||
|
|
* @author Lewis He (lewishe@outlook.com)
|
||
|
|
* @license MIT
|
||
|
|
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
|
||
|
|
* @date 2024-08-16
|
||
|
|
* @note If you are unable to upload the firmware after changing the USB mode, please put the board into download mode.
|
||
|
|
* For how to enter download mode, please see README and FAQ.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef ARDUINO_USB_MODE
|
||
|
|
#error This ESP32 SoC has no Native USB interface
|
||
|
|
#elif ARDUINO_USB_MODE == 1
|
||
|
|
#warning This sketch should be used when USB is in OTG mode
|
||
|
|
void setup() {}
|
||
|
|
void loop() {}
|
||
|
|
#else
|
||
|
|
#include "USB.h"
|
||
|
|
#include "USBMSC.h"
|
||
|
|
#include "SD.h"
|
||
|
|
|
||
|
|
|
||
|
|
// T3-S3-V1.2 PINMAP
|
||
|
|
#define SDCARD_MOSI 11
|
||
|
|
#define SDCARD_MISO 2
|
||
|
|
#define SDCARD_SCLK 14
|
||
|
|
#define SDCARD_CS 13
|
||
|
|
|
||
|
|
|
||
|
|
#undef LED_BUILTIN
|
||
|
|
#define LED_BUILTIN 37
|
||
|
|
|
||
|
|
SPIClass SDCardSPI(HSPI);
|
||
|
|
USBMSC MSC;
|
||
|
|
|
||
|
|
static uint32_t DISK_SECTOR_COUNT = 0;
|
||
|
|
static uint16_t DISK_SECTOR_SIZE = 0;
|
||
|
|
|
||
|
|
|
||
|
|
static int32_t onWrite(uint32_t lba, uint32_t offset, uint8_t *buffer, uint32_t bufsize)
|
||
|
|
{
|
||
|
|
// Serial.printf("MSC WRITE: lba: %lu, offset: %lu, bufsize: %lu\n", lba, offset, bufsize);
|
||
|
|
uint32_t secSize = SD.sectorSize();
|
||
|
|
if (!secSize) {
|
||
|
|
return 0; // disk error
|
||
|
|
}
|
||
|
|
for (int x = 0; x < bufsize / secSize; x++) {
|
||
|
|
uint8_t blkbuffer[secSize];
|
||
|
|
memcpy(blkbuffer, (uint8_t *)buffer + secSize * x, secSize);
|
||
|
|
if (!SD.writeRAW(blkbuffer, lba + x)) {
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
return bufsize;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int32_t onRead(uint32_t lba, uint32_t offset, void *buffer, uint32_t bufsize)
|
||
|
|
{
|
||
|
|
// Serial.printf("MSC READ: lba: %lu, offset: %lu, bufsize: %lu\n", lba, offset, bufsize);
|
||
|
|
uint32_t secSize = SD.sectorSize();
|
||
|
|
if (!secSize) {
|
||
|
|
return false; // disk error
|
||
|
|
}
|
||
|
|
for (int x = 0; x < bufsize / secSize; x++) {
|
||
|
|
if (!SD.readRAW((uint8_t *)buffer + (x * secSize), lba + x)) {
|
||
|
|
return 0; // outside of volume boundary
|
||
|
|
}
|
||
|
|
}
|
||
|
|
return bufsize;
|
||
|
|
}
|
||
|
|
|
||
|
|
static bool onStartStop(uint8_t power_condition, bool start, bool load_eject)
|
||
|
|
{
|
||
|
|
Serial.printf("MSC START/STOP: power: %u, start: %u, eject: %u\n", power_condition, start, load_eject);
|
||
|
|
return true;
|
||
|
|
}
|
||
|
|
|
||
|
|
static void usbEventCallback(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data)
|
||
|
|
{
|
||
|
|
if (event_base == ARDUINO_USB_EVENTS) {
|
||
|
|
arduino_usb_event_data_t *data = (arduino_usb_event_data_t *)event_data;
|
||
|
|
switch (event_id) {
|
||
|
|
case ARDUINO_USB_STARTED_EVENT: Serial.println("USB PLUGGED"); break;
|
||
|
|
case ARDUINO_USB_STOPPED_EVENT: Serial.println("USB UNPLUGGED"); break;
|
||
|
|
case ARDUINO_USB_SUSPEND_EVENT: Serial.printf("USB SUSPENDED: remote_wakeup_en: %u\n", data->suspend.remote_wakeup_en); break;
|
||
|
|
case ARDUINO_USB_RESUME_EVENT: Serial.println("USB RESUMED"); break;
|
||
|
|
|
||
|
|
default: break;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void setup()
|
||
|
|
{
|
||
|
|
Serial.begin(115200);
|
||
|
|
|
||
|
|
Serial.setDebugOutput(true);
|
||
|
|
|
||
|
|
pinMode(LED_BUILTIN, OUTPUT);
|
||
|
|
|
||
|
|
SDCardSPI.begin(SDCARD_SCLK, SDCARD_MISO, SDCARD_MOSI);
|
||
|
|
|
||
|
|
if (!SD.begin(SDCARD_CS, SDCardSPI, 16000000U)) {
|
||
|
|
while (1) {
|
||
|
|
Serial.println("SD FAILED!");
|
||
|
|
digitalWrite(LED_BUILTIN, 1 - digitalRead(LED_BUILTIN));
|
||
|
|
delay(1000);
|
||
|
|
}
|
||
|
|
} else {
|
||
|
|
Serial.println("SD OK!");
|
||
|
|
}
|
||
|
|
|
||
|
|
USB.onEvent(usbEventCallback);
|
||
|
|
MSC.vendorID("ESP32"); //max 8 chars
|
||
|
|
MSC.productID("USB_MSC"); //max 16 chars
|
||
|
|
MSC.productRevision("1.0"); //max 4 chars
|
||
|
|
MSC.onStartStop(onStartStop);
|
||
|
|
MSC.onRead(onRead);
|
||
|
|
MSC.onWrite(onWrite);
|
||
|
|
|
||
|
|
MSC.mediaPresent(true);
|
||
|
|
// MSC.isWritable(true); // true if writable, false if read-only
|
||
|
|
|
||
|
|
DISK_SECTOR_COUNT = SD.numSectors();
|
||
|
|
DISK_SECTOR_SIZE = SD.sectorSize();
|
||
|
|
|
||
|
|
MSC.begin(DISK_SECTOR_COUNT, DISK_SECTOR_SIZE);
|
||
|
|
USB.begin();
|
||
|
|
|
||
|
|
digitalWrite(LED_BUILTIN, HIGH);
|
||
|
|
}
|
||
|
|
|
||
|
|
void loop()
|
||
|
|
{
|
||
|
|
// put your main code here, to run repeatedly:
|
||
|
|
}
|
||
|
|
#endif /* ARDUINO_USB_MODE */
|