jlpoole/LilyGo-LoRa-Series
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1
LilyGo-LoRa-Series/README_CN.MD

391 lines
20 KiB
Markdown
Raw Normal View History

Update examples
2020-11-24 17:03:49 +08:00
<h1 align = "center">🌟LilyGo LoRa Series🌟</h1>
## **[English](./README.MD) | 中文**
Update README
2024-03-11 14:48:17 +08:00
## 1️⃣产品
| Product | SOC | Flash | PSRAM |
| ---------------------------------- | --------------- | ------------- | -------------- |
| [T-Beam Supreme L76K][1] | ESP32-S3FN8 | 8MB(Quad-SPI) | 8MB(Quad-SPI) |
| [T-Beam Supreme Ublox][2] | ESP32-S3FN8 | 8MB(Quad-SPI) | 8MB(Quad-SPI) |
| [T-Beam Meshtastic][3] | ESP32-D0WDQ6-V3 | 4MB(Quad-SPI) | 8MB(Quad-SPI) |
| [T-Beam SoftRF][4] | ESP32-D0WDQ6-V3 | 4MB(Quad-SPI) | 8MB(Quad-SPI) |
| [T3-S3 SX1280 2.4G With out PA][5] | ESP32-S3FH4R2 | 4MB(Quad-SPI) | ❌ |
| [T3-S3 SX1280 2.4G With PA][6] | ESP32-S3FH4R2 | 4MB(Quad-SPI) | ❌ |
| [T3-S3 SX1276][7] | ESP32-S3FH4R2 | 4MB(Quad-SPI) | ❌ |
| [T3-S3 SX1262][8] | ESP32-S3FH4R2 | 4MB(Quad-SPI) | ❌ |
| [LoRa32][8] | ESP32-PICO-D4 | 4MB(Quad-SPI) | ❌ |
| [T-Motion][9] | STM32L073RZ | 192 Kbyte | (20-Kbyte RAM) |
[1]: https://www.lilygo.cc/products/softrf-t-beamsupreme?variant=42880905052341 "T-Beam Supreme L76K"
[2]: https://www.lilygo.cc/products/softrf-t-beamsupreme?variant=42880905281717 "T-Beam Supreme Ublox"
[3]: https://www.lilygo.cc/products/t-beam-v1-1-esp32-lora-module "T-Beam Meshtastic"
[4]: https://www.lilygo.cc/products/t-beam-softrf "T-Beam SoftRF"
[5]: https://www.lilygo.cc/products/t3s3-v1-0?variant=42586879656117 "T3-S3 SX1280 2.4G With out PA"
[6]: https://www.lilygo.cc/products/t3s3-v1-0?variant=43043715678389 "T3-S3 SX1280 2.4G With PA"
[7]: https://www.lilygo.cc/products/t3s3-v1-0?variant=42586879688885 "T3-S3 SX1276"
[8]: https://www.lilygo.cc/products/t3s3-v1-0?variant=42586879721653 "T3-S3 SX1262"
[9]: https://www.lilygo.cc/products/t-motion-s76g-stm32-lora "T-Motion"
## 2️⃣示例描述
Update example to support LilyGo LoRa series
2020-12-08 11:33:03 +08:00
```
Update RREADME
2022-12-09 19:06:19 +08:00
├─ArduinoLoRa # Only support SX1276/SX1278 radio module
Added LoRa1.8 sch ,update readme
2022-07-29 11:07:40 +08:00
│ ├─LoRaReceiver
│ └─LoRaSender
Update README
2023-09-08 17:48:57 +08:00
├── Display # Only supports TBeam TFT Shield
│ ├── Free_Font_Demo
Update README_CN.MD
2024-01-16 16:22:50 +08:00
│ ├── GxEPD_U8G2_Fonts_Demo
Update README
2023-09-08 17:48:57 +08:00
│ ├── TBeam_TFT_Shield
│ ├── TFT_Char_times
│ └── UTFT_demo
Update RREADME
2022-12-09 19:06:19 +08:00
├─GPS # T-Beam GPS demo examples
Added LoRa1.8 sch ,update readme
2022-07-29 11:07:40 +08:00
│ ├─TinyGPS_Example
Update RREADME
2022-12-09 19:06:19 +08:00
│ ├─TinyGPS_FullExample
│ ├─TinyGPS_KitchenSink
│ ├─UBlox_BasicNMEARead # Only support Ublox GNSS Module
Update readme
2022-12-09 19:23:28 +08:00
│ ├─UBlox_Recovery # Only support Ublox GNSS Module
Update README
2023-02-01 10:29:33 +08:00
│ ├─UBlox_OutputRate # Only support Ublox GNSS Module
Update RREADME
2022-12-09 19:06:19 +08:00
│ └─UBlox_NMEAParsing # Only support Ublox GNSS Module
├─OLED # OLED demo examples
│ ├─SH1106FontUsage
│ ├─SH1106GraphicsTest
│ ├─SH1106IconMenu
│ ├─SH1106PrintUTF8
Added LoRa1.8 sch ,update readme
2022-07-29 11:07:40 +08:00
│ ├─SSD1306SimpleDemo
│ └─SSD1306UiDemo
Update RREADME
2022-12-09 19:06:19 +08:00
├─RadioLibExamples # RadioLib examples,Support SX1276/78/62/80
Added LoRa1.8 sch ,update readme
2022-07-29 11:07:40 +08:00
│ ├─SX1262
Update README_CN.MD
2024-01-16 16:22:50 +08:00
│ │ ├─SX1262_C6_Receive_interrupt
│ │ ├─SX1262_C6_Transmit_Interrupt
Added LoRa1.8 sch ,update readme
2022-07-29 11:07:40 +08:00
│ │ ├─SX1262_Receive_Interrupt
│ │ └─SX1262_Transmit_Interrupt
│ ├─SX1268
│ │ ├─SX1268_Receive_Interrupt
│ │ └─SX1268_Transmit_Interrupt
│ ├─SX1276
│ │ ├─SX1276_Receive_Interrupt
│ │ └─SX1276_Transmit_Interrupt
│ ├─SX1278
│ │ ├─SX1278_Receive
│ │ ├─SX1278_Receive_Interrupt
│ │ ├─SX1278_Transmit
│ │ └─SX1278_Transmit_Interrupt
│ ├─SX1280
Update RREADME
2022-12-09 19:06:19 +08:00
│ │ ├─Ranging
│ │ │ ├─Ranging_Master
│ │ │ └─Ranging_Slave
Added LoRa1.8 sch ,update readme
2022-07-29 11:07:40 +08:00
│ │ ├─SX128x_Receive_Interrupt
│ │ └─SX128x_Transmit_Interrupt
Update README
2022-12-13 22:38:30 +08:00
│ └─TBeamAllFunction # T-Beam all function example,Only tbeamv1.x is supported temporarily
Update README
2023-04-04 09:33:57 +08:00
├── Sensor # Sensor examples , just support t-beams3-supreme
Update README
2023-01-03 09:50:01 +08:00
│ ├── BME280_AdvancedsettingsExample
│ ├── BME280_TestExample
│ ├── BME280_UnifiedExample
Update README
2022-12-13 22:38:30 +08:00
│ ├── PCF8563_AlarmByUnits
│ ├── PCF8563_SimpleTime
│ ├── PCF8563_TimeLib
│ ├── PCF8563_TimeSynchronization
│ ├── QMC6310_CalibrateExample
│ ├── QMC6310_CompassExample
│ ├── QMC6310_GetDataExample
│ ├── QMC6310_GetPolarExample
│ ├── QMI8658_BlockExample
│ ├── QMI8658_GetDataExample
│ ├── QMI8658_InterruptBlockExample
│ ├── QMI8658_InterruptExample
│ ├── QMI8658_LockingMechanismExample
│ ├── QMI8658_MadgwickAHRS
│ ├── QMI8658_PedometerExample
│ ├── QMI8658_ReadFromFifoExample
│ └── QMI8658_WakeOnMotion
Added LoRa1.8 sch ,update readme
2022-07-29 11:07:40 +08:00
├─SleepTest
chore/LoRaWAN: support platformio Signed-off-by: lbuque <1102390310@qq.com>
2023-01-09 14:34:31 +08:00
└─LoRaWAN # OTAA method Join TTN example
└─OTTA
Update readme
2020-12-08 14:40:28 +08:00
Update example to support LilyGo LoRa series
2020-12-08 11:33:03 +08:00
```
feature: Add description of pinmap closed #79 Signed-off-by: liangyingy <1102390310@qq.com>
2022-11-01 18:36:30 +08:00
Update README
2024-03-11 14:48:17 +08:00
## 3️⃣Arduino IDE 快速开始:
1. 安装 [Arduino IDE](https://www.arduino.cc/en/software)
2. 安装 [Arduino ESP32](https://docs.espressif.com/projects/arduino-esp32/en/latest/)
3. 将 `lib` 目录中所有文件夹复制到`Sketchbook location`目录,如何找到自己的libraries 位置,[请看这里](https://support.arduino.cc/hc/en-us/articles/4415103213714-Find-sketches-libraries-board-cores-and-other-files-on-your-computer)
- Windows: `C:\Users\{username}\Documents\Arduino`
- macOS: `/Users/{username}/Documents/Arduino`
- Linux: `/home/{username}/Arduino`
4. 打开对应的示例
- 打开下载的`LilyGo-LoRa-Series`
- 打开`examples`
- 选择示例文件,打开`ino`结尾的文件
5. 在Arduino IDE 工具项目中选择相应的板子,点击下面列表中对应的选项进行选择
<details>
<summary>点击查看 T-Beam S3 Supreme Arduino IDE 选项</summary>
| T-Beam S3 Supreme | Value |
| ------------------------------------ | --------------------------------- |
| Board | **ESP32S3 Dev Module** |
| Port | Your port |
| USB CDC On Boot | Enable |
| CPU Frequency | 240MHZ(WiFi) |
| Core Debug Level | None |
| USB DFU On Boot | Disable |
| Erase All Flash Before Sketch Upload | Disable |
| Events Run On | Core1 |
| Flash Mode | QIO 80MHZ |
| Flash Size | **8MB(64Mb)** |
| Arduino Runs On | Core1 |
| USB Firmware MSC On Boot | Disable |
| Partition Scheme | **8M Flash(3M APP/1.5MB SPIFFS)** |
| PSRAM | **QSPI PSRAM** |
| Upload Mode | **UART0/Hardware CDC** |
| Upload Speed | 921600 |
| USB Mode | **CDC and JTAG** |
| Programmer | **Esptool** |
</details>
<details>
<summary>点击查看 T-Beam-V1.X Arduino IDE 选项</summary>
| T-Beam-V1.X | Value |
| ------------------------------------ | ------------------------------------------------------- |
| Board | **ESP32 Dev Module** |
| Port | Your port |
| CPU Frequency | 240MHZ(WiFi/BT) |
| Core Debug Level | None |
| Erase All Flash Before Sketch Upload | Disable |
| Events Run On | Core1 |
| Flash Frequency | 80MHZ |
| Flash Mode | QIO |
| Flash Size | **4MB(32Mb)** |
| JTAG Adapter | Disabled |
| Arduino Runs On | Core1 |
| Partition Scheme | **Default 4M Flash with spiffs(1.2M APP/1.5MB SPIFFS)** |
| PSRAM | **Enable** |
| Upload Speed | 921600 |
| Programmer | **Esptool** |
</details>
<details>
<summary>点击查看 LoRa32 V1.x Arduino IDE 选项</summary>
| T-Beam-V1.X | Value |
| ------------------------------------ | ------------------------------------------------------- |
| Board | **ESP32 Dev Module** |
| Port | Your port |
| CPU Frequency | 240MHZ(WiFi/BT) |
| Core Debug Level | None |
| Erase All Flash Before Sketch Upload | Disable |
| Events Run On | Core1 |
| Flash Frequency | 80MHZ |
| Flash Mode | QIO |
| Flash Size | **4MB(32Mb)** |
| JTAG Adapter | Disabled |
| Arduino Runs On | Core1 |
| Partition Scheme | **Default 4M Flash with spiffs(1.2M APP/1.5MB SPIFFS)** |
| PSRAM | **Disable** |
| Upload Speed | 921600 |
| Programmer | **Esptool** |
</details>
<details>
<summary>点击查看 T3-S3 Arduino IDE 选项</summary>
| T3-S3 | Value |
| ------------------------------------ | ------------------------------------------------------- |
| Board | **ESP32S3 Dev Module** |
| Port | Your port |
| USB CDC On Boot | Enable |
| CPU Frequency | 240MHZ(WiFi) |
| Core Debug Level | None |
| USB DFU On Boot | Disable |
| Erase All Flash Before Sketch Upload | Disable |
| Events Run On | Core1 |
| Flash Mode | QIO 80MHZ |
| Flash Size | **4MB(32Mb)** |
| Arduino Runs On | Core1 |
| USB Firmware MSC On Boot | Disable |
| Partition Scheme | **Default 4M Flash with spiffs(1.2M APP/1.5MB SPIFFS)** |
| PSRAM | **QSPI PSRAM** |
| Upload Mode | **UART0/Hardware CDC** |
| Upload Speed | 921600 |
| USB Mode | **CDC and JTAG** |
| Programmer | **Esptool** |
</details>
<details>
<summary>点击查看 T-Motion Arduino IDE 选项</summary>
| T-Motion | Value |
| --------------------------- | ---------------------------------------- |
| Board | **Nucleo-64** |
| Port | Your port |
| Debug symbols and core logs | None |
| Optimize | Smallest (-Os default) |
| Board part number | Nucleo L073RZ |
| C Runtime Library | Newlib Nano (default) |
| Upload method | STM32CubeProgrammer (DFU) |
| USB support (if available) | CDC (generic 'Serial' supersede U(S)ART) |
| U(S)ART support | Enabled (generic 'Serial') |
| USB speed (if available) | Low/Full Speed |
- 需要上传草图,需要按住板子BOOT按键，然后插入USB，此时将进入DFU模式,才允许程序写入
</details>
4. 请在每个草图的 `utilities.h` 文件的上方根据你的板子型号取消注释,否则编译将报错误
5. 上传草图
## 4️⃣ TTN
Update example to support LilyGo LoRa series
2020-12-08 11:33:03 +08:00
Update README
2024-03-11 14:48:17 +08:00
接入TTN(The Things Network)使用请参考 [LilyGo_LoRa_Series_Quick_Start](./docs/zh/LilyGo_LoRa_Series_Quick_Start_On_TTN_zh.md)
perfect：LoRa Precautions for setting output power
2022-07-25 17:19:15 +08:00
update
2022-01-13 10:12:11 +08:00
Update README
2024-03-11 14:48:17 +08:00
## 5️⃣ 应用
update
2022-01-13 10:12:11 +08:00
Update README
2024-03-11 14:48:17 +08:00
- [T-Beam SoftRF](https://github.com/lyusupov/SoftRF)
- [T-Beam Paxcounter](https://github.com/cyberman54/ESP32-Paxcounter)
- [T-Beam Meshtastic](https://github.com/meshtastic/Meshtastic-device)
update
2022-01-13 10:12:11 +08:00
Update README
2024-03-11 14:48:17 +08:00
# 6️⃣ 数据手册
Update example to support LilyGo LoRa series
2020-12-08 11:33:03 +08:00
Update README
2024-03-11 14:48:17 +08:00
##### T-Beam S3 Supreme datasheet
Update example to support LilyGo LoRa series
2020-12-08 11:33:03 +08:00
Update README
2024-03-11 14:48:17 +08:00
- [T-Beam Supreme schematic](schematic/LilyGo_T-BeamS3Supreme.pdf)
- [AXP2101 datasheet](./lib/XPowersLib/datasheet/AXP2101_Datasheet_V1.0_en.pdf)
- [SX1262 datasheet](https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1262)
- [GSP MAX-M10 datasheet](https://www.u-blox.com/zh/product/max-m10-series)
- [PCF8563 datasheet](./lib/SensorsLib/datasheet/PCF8563%20Datasheet%20Rev.11.pdf)
- [QMI8658 datasheet](./lib/SensorsLib/datasheet/QMI8658A%20Datasheet%20Rev1.0.pdf)
- [QMC6310 datasheet](./lib/SensorsLib/datasheet/QMC6310%20Datasheet%20Rev.C.pdf)
- [BME280 datasheet](https://www.bosch-sensortec.com/products/environmental-sensors/humidity-sensors-bme280/)
Update examples
2020-11-24 17:03:49 +08:00
Update README
2024-03-11 14:48:17 +08:00
##### T-Beam ESP32 datasheet
Update examples
2020-11-24 17:03:49 +08:00
Update README
2024-03-11 14:48:17 +08:00
- [T-Beam_V1.2 schematic](schematic/LilyGo_TBeam_V1.2.pdf)
- [T-Beam_V1.1 schematic](schematic/LilyGo_TBeam_V1.1.pdf)
- [T-Beam_V1.0 schematic](schematic/LilyGo_TBeam_V1.0.pdf)
- [T-Beam_V0.7 schematic](schematic/LilyGo_TBeam_V0.7.pdf)
- [AXP192 datasheet](http://www.x-powers.com/en.php/Info/product_detail/article_id/29)
- [SX1262 datasheet](https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1262)
- [GSP NEO-6/NEO-8 datasheet](https://www.u-blox.com/en/product/neo-6-series)
Added instructions for using TTN V3 platform Please see docs/en/LilyGo_LoRa_Series_Quick_Start_On_TTN.md for details
2021-10-22 18:07:03 +08:00
Update README
2024-03-11 14:48:17 +08:00
##### T3-S3 (ESP32S3) datasheet
Added instructions for using TTN V3 platform Please see docs/en/LilyGo_LoRa_Series_Quick_Start_On_TTN.md for details
2021-10-22 18:07:03 +08:00
Update README
2024-03-11 14:48:17 +08:00
- [T3_S3_V1.2 schematic](schematic/T3_S3_V1.2.pdf)
- [T3_S3_V1.1 schematic](schematic/T3_S3_V1.1.pdf)
- [T3_S3_V1.1 schematic](schematic/T3_S3_V1.0.pdf)
- [SX1262 datasheet](https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1262)
- [SX1278 datasheet](https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1278)
- [SX1276 datasheet](https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1276)
- [SX1280 datasheet](https://www.semtech.cn/products/wireless-rf/lora-connect/sx1280)
Update examples
2020-11-24 17:03:49 +08:00
Update README
2024-03-11 14:48:17 +08:00
##### LoRa32(ESP32) datasheet
perfect：LoRa Precautions for setting output power
2022-07-25 17:19:15 +08:00
Update README
2024-03-11 14:48:17 +08:00
[T3_V1.6.1 schematic](schematic/T3_V1.6.1.pdf)
perfect：LoRa Precautions for setting output power
2022-07-25 17:19:15 +08:00
Update README
2024-03-11 14:48:17 +08:00
##### LoRa32(V1.0) datasheet
perfect：LoRa Precautions for setting output power
2022-07-25 17:19:15 +08:00
Update README
2024-03-11 14:48:17 +08:00
N.A
perfect：LoRa Precautions for setting output power
2022-07-25 17:19:15 +08:00
Update README
2024-03-11 14:48:17 +08:00
##### T-Motion datasheet
[T-Motion schematic](schematic/T-Motion.pdf)
# 7️⃣ 常见问题
1. T-Beam Supreme GPS备用电源来自于18650电池，如果移除18650电池将无法获得GPS热启动，如果需要使用GPS热启动，请连接18650电池
2. GPS没有数据输出，[参考GPS恢复出厂](firmware/NMEA_Reset/README.MD)
3. 如何找到引脚定义?
<details>
<summary>
Click to view detailed steps
</summary>
- Each sketch contains <utilities.h>, and all board pins are written in this file
</details>
4. 不能上传草图?
<details>
<summary>
Click to view detailed steps
</summary>
1. 连接板子USB到电脑
Update README
2024-03-24 18:56:30 +08:00
2. 按压BOOT按键，并且保持按压(如果没有BOOT按键,需要将GPIO0与GND连接)
Update README
2024-03-11 14:48:17 +08:00
3. 按压 RST 按键
4. 放开 RST 按键
Update README
2024-03-24 18:56:30 +08:00
5. 最后松开BOOT按键(如果没有BOOT按键,需要将GPIO0与GND断开连接)
Update README
2024-03-11 14:48:17 +08:00
6. 点击上传程序
</details>
5. LoRa设置输出功率后需要设置最低电流。设置sx1262如下 :
<details>
<summary>
Click to view detailed steps
</summary>
```c
perfect：LoRa Precautions for setting output power
2022-07-25 17:19:15 +08:00
// set output power to 10 dBm (accepted range is -17 - 22 dBm)
if (radio.setOutputPower(22) == RADIOLIB_ERR_INVALID_OUTPUT_POWER) {
Serial.println(F("Selected output power is invalid for this module!"));
while (true);
}
// set over current protection limit to 80 mA (accepted range is 45 - 240 mA)
// NOTE: set value to 0 to disable overcurrent protection
if (radio.setCurrentLimit(80) == RADIOLIB_ERR_INVALID_CURRENT_LIMIT) {
Serial.println(F("Selected current limit is invalid for this module!"));
while (true);
}
Update README
2024-03-11 14:48:17 +08:00
```
</details>
6. SX1280 PA版本使用注意事项
<details>
<summary>
Click to view detailed steps
</summary>
- 在使用SX1280 PA模块时，建议软件控制1280芯片输出2~5dbm，这样整个模组会输出20dbm的功率；
当1280芯片输出高于2dbm时，整个模组输出功率也只有20dbm；
当1280芯片输出高于5dbm时，整个模组输出功率也只有20dbm，但5dbm给到FEM，会损坏FEM芯片（FEM允许最大输入是5dbm）
如果1280芯片输出低于2dbm，整个模组输出功率20dbm以内。
- T3-S3 PA版本 SX1280 输出功率设置不能大于2~5dbm，否则可能导致FEM芯片损坏。设置3dbm就已经有20dmb的输出功率
</details>
7. 如何分辨LoRa型号?
<details>
<summary>
Click to view detailed steps
</summary>
- 分辨LoRa的型号只需要查看板子上的贴纸,433MHz则是SX1278，868MHz则是SX1276，如果标签写的是SX1262则是SX1262
</details>
8. 为什么Serial没有任何输出?
- Arduino -> Tools -> USB CDC On Boot -> Enable
Update README
2024-03-11 14:51:58 +08:00
9. T-Beam-s3-supreme 天线信号质量
<details>
<summary>
Click to view detailed
</summary>
Update README
2024-03-11 14:48:17 +08:00
Update README
2024-03-11 14:51:58 +08:00
![t-beams3-supreme-ant-868M](./images/t-beams3-supreme-ant-868M.jpg)
![t-beams3-supreme-ant-915M](./images/t-beams3-supreme-ant-915M.jpg)
</details>
Update README
2023-03-17 18:27:16 +08:00
Update README
2023-06-12 11:51:11 +08:00
Reference in a new issue Copy permalink