diff --git a/README.MD b/README.MD
index 5d72d08..80b956e 100644
--- a/README.MD
+++ b/README.MD
@@ -11,13 +11,14 @@
- ⚠️ If using the PA version, please carefully read the PA power setting limits on the corresponding page. Incorrect output power settings may damage the PA.
- ⚠️ 如果使用PA版本，请仔细阅读对应页面的PA功率设置限制，错误的设置输出功率很有可能会损坏PA
-
### `1` Get Started
- 🔧 **[T-Beam Quick Start](./docs/en/t_beam/t_beam_hw.md)**
- 🔧 **[T-Beam Supreme Quick Start](./docs/en/t_beam_supreme/t_beam_supreme_hw.md)**
- 🔧 **[T-Beam BPF Quick Start](./docs/en/t_beam_bpf/t_beam_bpf_hw.md)**
-- 🔧 **[T-Beam 1W Quick Start](./docs/en/t_beam_1w/t_beam_1w_hw.md)**
+- 🔧 **[T-Beam 1W SX1262 Quick Start](./docs/en/t_beam_1w_sx1262/t_beam_1w_sx1262.md)**
+- 🔧 **[T-Beam 1W LR1121 Quick Start](./docs/en/t_beam_1w_lr1121/t_beam_1w_lr1121.md)**
+- 🔧 **[T-Beam 1W LR2021 Quick Start](./docs/en/t_beam_1w_lr2021/t_beam_1w_lr2021.md)**
- 🔧 **[LoRa32 V1.3 Quick Start](./docs/en/t3_v13_sx1276/t3_v13_sx1276.md)**
- 🔧 **[LoRa32 V1.6.1 Quick Start](./docs/en/t3_v161_sx1276/t3_v161_sx1276_hw.md)**
- 🔧 **[LoRa32 TCXO Quick Start](./docs/en/t3_tcxo_sx1276/t3_tcxo_sx1276_hw.md)**
diff --git a/docs/en/t_beam_1w_lr1121/images/XY16EXP33.png b/docs/en/t_beam_1w_lr1121/images/XY16EXP33.png
new file mode 100644
index 0000000..902a33e
Binary files /dev/null and b/docs/en/t_beam_1w_lr1121/images/XY16EXP33.png differ
diff --git a/docs/en/t_beam_1w_lr1121/images/currnetA.png b/docs/en/t_beam_1w_lr1121/images/currnetA.png
new file mode 100644
index 0000000..c9d4b05
Binary files /dev/null and b/docs/en/t_beam_1w_lr1121/images/currnetA.png differ
diff --git a/docs/en/t_beam_1w_lr1121/images/currnetB.png b/docs/en/t_beam_1w_lr1121/images/currnetB.png
new file mode 100644
index 0000000..90573cb
Binary files /dev/null and b/docs/en/t_beam_1w_lr1121/images/currnetB.png differ
diff --git a/docs/en/t_beam_1w_lr1121/t_beam_1w_lr1121.md b/docs/en/t_beam_1w_lr1121/t_beam_1w_lr1121.md
new file mode 100644
index 0000000..d01bfdc
--- /dev/null
+++ b/docs/en/t_beam_1w_lr1121/t_beam_1w_lr1121.md
@@ -0,0 +1,176 @@
+
+
+
🌟LilyGo T-Beam-1W-LR1121
+
+## Overview
+
+* This page introduces the hardware parameters related to `LilyGo T-Beam-1W-LR1121`
+
+### Notes on use
+
+1. This board will not charge the external 7.4V battery, it is only powered by the battery.
+2. Please be sure to connect the antenna before transmitting, otherwise it is easy to damage the RF module.
+3. Please note that the GPIO with * added to the external pin header GPIO name is already connected to the internal module and cannot be used
+4. This RF module provides a maximum power output of 30dBm on this board
+
+## PlatformIO Quick Start
+
+1. Install [Visual Studio Code](https://code.visualstudio.com/) and [Python](https://www.python.org/)
+2. Search for the `PlatformIO` plugin in the `Visual Studio Code` extension and install it.
+3. After the installation is complete, you need to restart `Visual Studio Code`
+4. After restarting `Visual Studio Code`, select `File` in the upper left corner of `Visual Studio Code` -> `Open Folder` -> select the `LilyGo-LoRa-Series` directory
+5. Wait for the installation of third-party dependent libraries to complete
+6. Click on the `platformio.ini` file, and in the `platformio` column
+7. Select the board name you want to use in `default_envs` and uncomment it.
+8. Uncomment one of the lines `src_dir = xxxx` to make sure only one line works , Please note the example comments, indicating what works and what does not.
+9. Click the (✔) symbol in the lower left corner to compile
+10. Connect the board to the computer USB-C , Micro-USB is used for module firmware upgrade
+11. Click (→) to upload firmware
+12. Click (plug symbol) to monitor serial output
+13. If it cannot be written, or the USB device keeps flashing, please check the **FAQ** below
+
+## Arduino IDE quick start
+
+1. Install [Arduino IDE](https://www.arduino.cc/en/software)
+2. Install [Arduino ESP32](https://docs.espressif.com/projects/arduino-esp32/en/latest/)
+3. Copy all folders in the `lib` directory to the `Sketchbook location` directory. How to find the location of your own libraries, [please see here](https://support.arduino.cc/hc/en-us/articles/4415103213714-Find-sketches-libraries-board-cores-and-other-files-on-your-computer)
+ * Windows: `C:\Users\{username}\Documents\Arduino`
+ * macOS: `/Users/{username}/Documents/Arduino`
+ * Linux: `/home/{username}/Arduino`
+4. Open the corresponding example
+ * Open the downloaded `LilyGo-LoRa-Series`
+ * Open `examples`
+ * Select the sample file and open the file ending with `ino`
+5. On Arduino Select the corresponding board in the IDE tool project and click on the corresponding option in the list below to select
+
+ | Name | Value |
+ | ------------------------------------ | ---------------------------------------------------- |
+ | Board | **ESP32S3 Dev Module** |
+ | Port | Your port |
+ | USB CDC On Boot | Enable |
+ | CPU Frequency | 240MHZ(WiFi) |
+ | Core Debug Level | None |
+ | USB DFU On Boot | Disable |
+ | Erase All Flash Before Sketch Upload | Disable |
+ | Flash Mode | QIO 80Mhz |
+ | Flash Size | **16MB(128Mb)** |
+ | Arduino Runs On | Core1 |
+ | USB Firmware MSC On Boot | Disable |
+ | Partition Scheme | **Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)** |
+ | PSRAM | **QSPI PSRAM** |
+ | Upload Speed | 921600 |
+ | Programmer | **Esptool** |
+
+6. Please uncomment the `utilities.h` file of each sketch according to your board model e.g `T_BEAM_1W_LR1121`, otherwise the compilation will report an error.
+7. Upload sketch
+
+### 📍 Pins Map
+
+| Name | GPIO NUM | Free |
+| ----------------------- | ------------------------------ | ---- |
+| Uart1 TX | 43(External QWIIC Socket) | ✅️ |
+| Uart1 RX | 44(External QWIIC Socket) | ✅️ |
+| SDA | 8 (External QWIIC Socket same) | ❌ |
+| SCL | 9 (External QWIIC Socket same) | ❌ |
+| SPI MOSI | 11 | ❌ |
+| SPI MISO | 12 | ❌ |
+| SPI SCK | 13 | ❌ |
+| SD CS | 10 | ❌ |
+| SD MOSI | Share with SPI bus | ❌ |
+| SD MISO | Share with SPI bus | ❌ |
+| SD SCK | Share with SPI bus | ❌ |
+| GNSS(**L76K**) TX | 6 | ❌ |
+| GNSS(**L76K**) RX | 5 | ❌ |
+| GNSS(**L76K**) PPS | 7 | ❌ |
+| GNSS(**L76K**) Wake-up | 16 | ❌ |
+| LoRa(**LR1121**) SCK | Share with SPI bus | ❌ |
+| LoRa(**LR1121**) MISO | Share with SPI bus | ❌ |
+| LoRa(**LR1121**) MOSI | Share with SPI bus | ❌ |
+| LoRa(**LR1121**) RESET | 3 | ❌ |
+| LoRa(**LR1121**) DIO10 | 1 | ❌ |
+| LoRa(**LR1121**) DIO11 | 21 | ❌ |
+| LoRa(**LR1121**) CS | 15 | ❌ |
+| LoRa(**LR1121**) LDO EN | 40 | ❌ |
+| LoRa(**LR1121**) BUSY | 38 | ❌ |
+| Button1 (BOOT) | 0 | ❌ |
+| Button2 | 17 | ❌ |
+| On Board LED | 18 | ❌ |
+| NTC ADC | 14 | ❌ |
+| Battery ADC | 4 | ❌ |
+| Fan control | 41 | ❌ |
+
+> \[!IMPORTANT]
+>
+> LDO EN pin is control pin inside the module:
+>
+> 1. High level turns on the Radio
+> 2. Low level turns off the Radio
+>
+
+### 🧑🏼🔧 I2C Devices Address
+
+| Devices | 7-Bit Address | Share Bus |
+| ------------------- | ------------- | --------- |
+| OLED Display SH1106 | 0x3C | ✅️ |
+
+### ⚡ Electrical parameters
+
+| Features | Details |
+| -------------------- | ------- |
+| 🔗USB-C Input Voltage | 3.9V-6V |
+| ⚡Charge Function | ❌ |
+| 🔋Battery Voltage | 7.4V |
+
+> \[!IMPORTANT]
+>
+> The battery used must have a discharge capacity of 2A or greater; otherwise, it may trigger battery protection during high-power transmission.
+>
+
+### Button Description
+
+| Channel | Peripherals |
+| ------- | ------------------------------ |
+| IO17 | Customizable buttons |
+| BOOT | Boot mode button, customizable |
+| RST | Reset button |
+
+### LED Description
+
+* IO18 LED
+ 1. Connect to GPIO18, you can turn the LED on or off by writing high or low level.
+
+* PPS LED
+ 1. This LED cannot be turned off and is connected to the GPS PPS Pin. This LED flashes to indicate that the PPS pulse has arrived.
+
+* USB LED
+ 1. LED On means the USB cable is connected,LED off means the USB cable is disconnected
+
+### RF parameters
+
+| Features | 868MHz |
+| ------------------------- | ----------------------- |
+| RF Module | LR1121 TCXO (XY16E8P33) |
+| Frequency range | 840~930MHz |
+| Transfer rate(FSK) | 0.6 ~ 300 kbps |
+| Transfer rate(LoRa) Sub1G | 0.091 ~ 62.5 kbps |
+| Transfer rate(LoRa) 2.4G | 0.476 ~ 101.5 kbps |
+| Modulation | FSK, MSK, GMSK, LoRa |
+
+
+### RF Block Diagram
+
+
+
+### VCC=+5V, 840MHz~930MHz module output power dBm and current
+
+
+
+### VCC=+5V, 2400MHz~2500MHz module output power dBm and current
+
+
+
+### Resource
+
+* [Schematic](../../../schematic/T-Beam_1W_V1.1.pdf)
diff --git a/docs/en/t_beam_1w_lr2021/images/XY16E3AXP33.png b/docs/en/t_beam_1w_lr2021/images/XY16E3AXP33.png
new file mode 100644
index 0000000..0bd7b36
Binary files /dev/null and b/docs/en/t_beam_1w_lr2021/images/XY16E3AXP33.png differ
diff --git a/docs/en/t_beam_1w_lr2021/images/currentA.png b/docs/en/t_beam_1w_lr2021/images/currentA.png
new file mode 100644
index 0000000..29c7f4d
Binary files /dev/null and b/docs/en/t_beam_1w_lr2021/images/currentA.png differ
diff --git a/docs/en/t_beam_1w_lr2021/images/currentB.png b/docs/en/t_beam_1w_lr2021/images/currentB.png
new file mode 100644
index 0000000..c0a405b
Binary files /dev/null and b/docs/en/t_beam_1w_lr2021/images/currentB.png differ
diff --git a/docs/en/t_beam_1w_lr2021/t_beam_1w_lr2021.md b/docs/en/t_beam_1w_lr2021/t_beam_1w_lr2021.md
new file mode 100644
index 0000000..bafb7e7
--- /dev/null
+++ b/docs/en/t_beam_1w_lr2021/t_beam_1w_lr2021.md
@@ -0,0 +1,208 @@
+
+
+
🌟LilyGo T-Beam-1W-LR2021
+
+## Overview
+
+* This page introduces the hardware parameters related to `LilyGo T-Beam-1W-LR2021`
+
+### Notes on use
+
+1. This board will not charge the external 7.4V battery, it is only powered by the battery.
+2. Please be sure to connect the antenna before transmitting, otherwise it is easy to damage the RF module.
+3. Please note that the GPIO with * added to the external pin header GPIO name is already connected to the internal module and cannot be used
+4. This RF module provides a maximum power output of 30dBm on this board
+
+## PlatformIO Quick Start
+
+1. Install [Visual Studio Code](https://code.visualstudio.com/) and [Python](https://www.python.org/)
+2. Search for the `PlatformIO` plugin in the `Visual Studio Code` extension and install it.
+3. After the installation is complete, you need to restart `Visual Studio Code`
+4. After restarting `Visual Studio Code`, select `File` in the upper left corner of `Visual Studio Code` -> `Open Folder` -> select the `LilyGo-LoRa-Series` directory
+5. Wait for the installation of third-party dependent libraries to complete
+6. Click on the `platformio.ini` file, and in the `platformio` column
+7. Select the board name you want to use in `default_envs` and uncomment it.
+8. Uncomment one of the lines `src_dir = xxxx` to make sure only one line works , Please note the example comments, indicating what works and what does not.
+9. Click the (✔) symbol in the lower left corner to compile
+10. Connect the board to the computer USB-C , Micro-USB is used for module firmware upgrade
+11. Click (→) to upload firmware
+12. Click (plug symbol) to monitor serial output
+13. If it cannot be written, or the USB device keeps flashing, please check the **FAQ** below
+
+## Arduino IDE quick start
+
+1. Install [Arduino IDE](https://www.arduino.cc/en/software)
+2. Install [Arduino ESP32](https://docs.espressif.com/projects/arduino-esp32/en/latest/)
+3. Copy all folders in the `lib` directory to the `Sketchbook location` directory. How to find the location of your own libraries, [please see here](https://support.arduino.cc/hc/en-us/articles/4415103213714-Find-sketches-libraries-board-cores-and-other-files-on-your-computer)
+ * Windows: `C:\Users\{username}\Documents\Arduino`
+ * macOS: `/Users/{username}/Documents/Arduino`
+ * Linux: `/home/{username}/Arduino`
+4. Open the corresponding example
+ * Open the downloaded `LilyGo-LoRa-Series`
+ * Open `examples`
+ * Select the sample file and open the file ending with `ino`
+5. On Arduino Select the corresponding board in the IDE tool project and click on the corresponding option in the list below to select
+
+ | Name | Value |
+ | ------------------------------------ | ---------------------------------------------------- |
+ | Board | **ESP32S3 Dev Module** |
+ | Port | Your port |
+ | USB CDC On Boot | Enable |
+ | CPU Frequency | 240MHZ(WiFi) |
+ | Core Debug Level | None |
+ | USB DFU On Boot | Disable |
+ | Erase All Flash Before Sketch Upload | Disable |
+ | Flash Mode | QIO 80Mhz |
+ | Flash Size | **16MB(128Mb)** |
+ | Arduino Runs On | Core1 |
+ | USB Firmware MSC On Boot | Disable |
+ | Partition Scheme | **Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)** |
+ | PSRAM | **QSPI PSRAM** |
+ | Upload Speed | 921600 |
+ | Programmer | **Esptool** |
+
+6. Please uncomment the `utilities.h` file of each sketch according to your board model e.g `T_BEAM_1W_LR2021`, otherwise the compilation will report an error.
+7. Upload sketch
+
+### 📍 Pins Map
+
+| Name | GPIO NUM | Free |
+| ----------------------- | ------------------------------ | ---- |
+| Uart1 TX | 43(External QWIIC Socket) | ✅️ |
+| Uart1 RX | 44(External QWIIC Socket) | ✅️ |
+| SDA | 8 (External QWIIC Socket same) | ❌ |
+| SCL | 9 (External QWIIC Socket same) | ❌ |
+| SPI MOSI | 11 | ❌ |
+| SPI MISO | 12 | ❌ |
+| SPI SCK | 13 | ❌ |
+| SD CS | 10 | ❌ |
+| SD MOSI | Share with SPI bus | ❌ |
+| SD MISO | Share with SPI bus | ❌ |
+| SD SCK | Share with SPI bus | ❌ |
+| GNSS(**L76K**) TX | 6 | ❌ |
+| GNSS(**L76K**) RX | 5 | ❌ |
+| GNSS(**L76K**) PPS | 7 | ❌ |
+| GNSS(**L76K**) Wake-up | 16 | ❌ |
+| LoRa(**LR2021**) SCK | Share with SPI bus | ❌ |
+| LoRa(**LR2021**) MISO | Share with SPI bus | ❌ |
+| LoRa(**LR2021**) MOSI | Share with SPI bus | ❌ |
+| LoRa(**LR2021**) RESET | 3 | ❌ |
+| LoRa(**LR2021**) DIO10 | 1 | ❌ |
+| LoRa(**LR2021**) DIO11 | 21 | ❌ |
+| LoRa(**LR2021**) CS | 15 | ❌ |
+| LoRa(**LR2021**) LDO EN | 40 | ❌ |
+| LoRa(**LR2021**) BUSY | 38 | ❌ |
+| Button1 (BOOT) | 0 | ❌ |
+| Button2 | 17 | ❌ |
+| On Board LED | 18 | ❌ |
+| NTC ADC | 14 | ❌ |
+| Battery ADC | 4 | ❌ |
+| Fan control | 41 | ❌ |
+
+> \[!IMPORTANT]
+>
+> LDO EN pin is control pin inside the module:
+>
+> 1. High level turns on the Radio
+> 2. Low level turns off the Radio
+>
+
+### 🧑🏼🔧 I2C Devices Address
+
+| Devices | 7-Bit Address | Share Bus |
+| ------------------- | ------------- | --------- |
+| OLED Display SH1106 | 0x3C | ✅️ |
+
+### ⚡ Electrical parameters
+
+| Features | Details |
+| -------------------- | ------- |
+| 🔗USB-C Input Voltage | 3.9V-6V |
+| ⚡Charge Function | ❌ |
+| 🔋Battery Voltage | 7.4V |
+
+> \[!IMPORTANT]
+>
+> The battery used must have a discharge capacity of 2A or greater; otherwise, it may trigger battery protection during high-power transmission.
+>
+
+### Button Description
+
+| Channel | Peripherals |
+| ------- | ------------------------------ |
+| IO17 | Customizable buttons |
+| BOOT | Boot mode button, customizable |
+| RST | Reset button |
+
+### LED Description
+
+* IO18 LED
+ 1. Connect to GPIO18, you can turn the LED on or off by writing high or low level.
+
+* PPS LED
+ 1. This LED cannot be turned off and is connected to the GPS PPS Pin. This LED flashes to indicate that the PPS pulse has arrived.
+
+* USB LED
+ 1. LED On means the USB cable is connected,LED off means the USB cable is disconnected
+
+### RF parameters
+
+| Features | LR2021 (XY16E3AXP33) |
+| ------------------------- | ----------------------------- |
+| RF Module | LR2021 TCXO |
+| Frequency range | 840 ~ 930MHz |
+| Transfer rate(FSK) | 0.5 ~ 2000 kbps |
+| Transfer rate(LoRa Sub1G) | 0.091 ~ 62.5kbps |
+| Transfer rate(FSK 2.4G) | 0.476 ~ 101.5 Kbps |
+| Transfer rate(FLRC) | 0.13 ~ 2.6 Mbps |
+| Modulation | FSK, MSK, LoRa ,FLRC |
+
+
+### RadioLib RF Setting
+
+```c
+static const uint32_t pa_version_rf_switch_dio_pins[] = {
+ RADIOLIB_LR2021_DIO5, RADIOLIB_LR2021_DIO6, RADIOLIB_LR2021_DIO7, RADIOLIB_LR2021_DIO8, RADIOLIB_NC
+};
+
+static const Module::RfSwitchMode_t low_sub1g_switch_table[] = {
+ // mode DIO5 DIO6 DIO7 DIO8
+ { LR2021::MODE_STBY, { LOW, LOW, LOW, LOW} },
+ { LR2021::MODE_TX, { LOW, LOW, LOW, HIGH} }, // Sub1G DIO8 SET HIGH
+ { LR2021::MODE_RX, { LOW, LOW, LOW, LOW} }, // Sub1G ALL DIO SET LOW
+ { LR2021::MODE_RX_HF, { LOW, LOW, LOW, LOW} },
+ { LR2021::MODE_TX_HF, { LOW, LOW, LOW, LOW} },
+ END_OF_MODE_TABLE,
+};
+
+static const Module::RfSwitchMode_t high_2g4_switch_table[] = {
+ // mode DIO5 DIO6 DIO7 DIO8
+ { LR2021::MODE_STBY, { LOW, LOW, LOW, LOW} },
+ { LR2021::MODE_TX, { LOW, LOW, LOW, LOW} },
+ { LR2021::MODE_RX, { LOW, LOW, LOW, LOW} },
+ { LR2021::MODE_RX_HF, { LOW, HIGH, LOW, LOW} }, //2.4G RX DIO6 SET HIGH
+ { LR2021::MODE_TX_HF, { LOW, LOW, HIGH, LOW} }, //2.4G TX DIO7 SET HIGH
+ END_OF_MODE_TABLE,
+};
+
+```
+
+
+
+### RF Block Diagram
+
+
+
+### VCC=+5V, 840MHz~930MHz module output power dBm and current
+
+
+
+### VCC=+5V, 2400MHz~2500MHz module output power dBm and current
+
+
+
+### Resource
+
+* [Schematic](../../../schematic/T-Beam_1W_V1.1.pdf)
diff --git a/docs/en/t_beam_1w/images/RampTime.jpg b/docs/en/t_beam_1w_sx1262/images/RampTime.jpg
similarity index 100%
rename from docs/en/t_beam_1w/images/RampTime.jpg
rename to docs/en/t_beam_1w_sx1262/images/RampTime.jpg
diff --git a/docs/en/t_beam_1w/images/XY16P35.jpg b/docs/en/t_beam_1w_sx1262/images/XY16P35.jpg
similarity index 100%
rename from docs/en/t_beam_1w/images/XY16P35.jpg
rename to docs/en/t_beam_1w_sx1262/images/XY16P35.jpg
diff --git a/docs/en/t_beam_1w/images/currnetA.jpg b/docs/en/t_beam_1w_sx1262/images/currnetA.jpg
similarity index 100%
rename from docs/en/t_beam_1w/images/currnetA.jpg
rename to docs/en/t_beam_1w_sx1262/images/currnetA.jpg
diff --git a/docs/en/t_beam_1w/images/currnetB.jpg b/docs/en/t_beam_1w_sx1262/images/currnetB.jpg
similarity index 100%
rename from docs/en/t_beam_1w/images/currnetB.jpg
rename to docs/en/t_beam_1w_sx1262/images/currnetB.jpg
diff --git a/docs/en/t_beam_1w/t_beam_1w_hw.md b/docs/en/t_beam_1w_sx1262/t_beam_1w_sx1262.md
similarity index 98%
rename from docs/en/t_beam_1w/t_beam_1w_hw.md
rename to docs/en/t_beam_1w_sx1262/t_beam_1w_sx1262.md
index 9ae1744..611aaf7 100644
--- a/docs/en/t_beam_1w/t_beam_1w_hw.md
+++ b/docs/en/t_beam_1w_sx1262/t_beam_1w_sx1262.md
@@ -141,10 +141,6 @@
| BOOT | Boot mode button, customizable |
| RST | Reset button |
-* The PWR button is connected to the PMU
- 1. In shutdown mode, press the PWR button to turn on the power supply
- 2. In power-on mode, press the PWR button for 6 seconds (default time) to turn off the power supply
-
### LED Description
* IO18 LED