Update example to support LilyGo LoRa series

examples/RadioLibExamples/SX1276/SX1276_Receive_Interrupt/utilities.h

@@ -0,0 +1,156 @@
+
+#pragma once
+
+/*
+* This sample program only supports T-Beam
+* */
+// #define LILYGO_TBeam_V0_7
+// #define LILYGO_TBeam_V1_0
+// #define LILYGO_TBeam_V1_1
+// #define LILYGO_T3_V1_0
+// #define LILYGO_T3_V1_6
+// #define LILYGO_T3_V2_0
+
+/*
+* The default program uses 868MHz,
+* if you need to change it,
+* please open this note and change to the frequency you need to test
+* */
+
+// #define LoRa_frequency      915.0
+
+
+#define UNUSE_PIN                   (0)
+
+#if defined(LILYGO_TBeam_V0_7)
+#define GPS_RX_PIN                  12
+#define GPS_TX_PIN                  15
+#define BUTTON_PIN                  39
+#define BUTTON_PIN_MASK             GPIO_SEL_39
+#define I2C_SDA                     21
+#define I2C_SCL                     22
+
+#define RADIO_SCLK_PIN               5
+#define RADIO_MISO_PIN              19
+#define RADIO_MOSI_PIN              27
+#define RADIO_CS_PIN                18
+#define RADIO_DI0_PIN               26
+#define RADIO_RST_PIN               23
+#define RADIO_DIO1_PIN              33
+#define RADIO_BUSY_PIN              32
+
+#define BOARD_LED                   14
+#define LED_ON                      HIGH
+#define LED_OFF                     LOW
+
+#define GPS_BAUD_RATE               9600
+#define HAS_GPS
+#define HAS_DISPLAY                 //Optional, bring your own board, no OLED !!
+
+#elif defined(LILYGO_TBeam_V1_0) || defined(LILYGO_TBeam_V1_1)
+
+#define GPS_RX_PIN                  34
+#define GPS_TX_PIN                  12
+#define BUTTON_PIN                  38
+#define BUTTON_PIN_MASK             GPIO_SEL_38
+#define I2C_SDA                     21
+#define I2C_SCL                     22
+#define PMU_IRQ                     35
+
+#define RADIO_SCLK_PIN               5
+#define RADIO_MISO_PIN              19
+#define RADIO_MOSI_PIN              27
+#define RADIO_CS_PIN                18
+#define RADIO_DI0_PIN               26
+#define RADIO_RST_PIN               23
+#define RADIO_DIO1_PIN              33
+#define RADIO_BUSY_PIN              32
+
+#define BOARD_LED                   4
+#define LED_ON                      LOW
+#define LED_OFF                     HIGH
+
+#define GPS_BAUD_RATE               9600
+#define HAS_GPS
+#define HAS_DISPLAY                 //Optional, bring your own board, no OLED !!
+
+#elif defined(LILYGO_T3_V1_0)
+#define I2C_SDA                     4
+#define I2C_SCL                     15
+#define OLED_RST                    16
+
+#define RADIO_SCLK_PIN              5
+#define RADIO_MISO_PIN              19
+#define RADIO_MOSI_PIN              27
+#define RADIO_CS_PIN                18
+#define RADIO_DI0_PIN               26
+#define RADIO_RST_PIN               14
+#define RADIO_DIO1_PIN              33
+#define RADIO_BUSY_PIN              32
+
+#define HAS_DISPLAY
+
+#elif defined(LILYGO_T3_V1_6)
+#define I2C_SDA                     21
+#define I2C_SCL                     22
+#define OLED_RST                    UNUSE_PIN
+
+#define RADIO_SCLK_PIN              5
+#define RADIO_MISO_PIN              19
+#define RADIO_MOSI_PIN              27
+#define RADIO_CS_PIN                18
+#define RADIO_DI0_PIN               26
+#define RADIO_RST_PIN               23
+#define RADIO_DIO1_PIN              33
+#define RADIO_BUSY_PIN              32
+
+#define SDCARD_MOSI                 15
+#define SDCARD_MISO                 2
+#define SDCARD_SCLK                 14
+#define SDCARD_CS                   13
+
+#define BOARD_LED                   25
+#define LED_ON                      HIGH
+
+#define ADC_PIN                     35
+
+#define HAS_SDCARD
+#define HAS_DISPLAY
+
+#elif defined(LILYGO_T3_V2_0)
+#define I2C_SDA                     21
+#define I2C_SCL                     22
+#define OLED_RST                    UNUSE_PIN
+
+#define RADIO_SCLK_PIN              5
+#define RADIO_MISO_PIN              19
+#define RADIO_MOSI_PIN              27
+#define RADIO_CS_PIN                18
+#define RADIO_DI0_PIN               26
+#define RADIO_RST_PIN               14
+#define RADIO_DIO1_PIN              UNUSE_PIN
+#define RADIO_BUSY_PIN              UNUSE_PIN
+
+#define SDCARD_MOSI                 15
+#define SDCARD_MISO                 2
+#define SDCARD_SCLK                 14
+#define SDCARD_CS                   13
+
+#define BOARD_LED                   0
+#define LED_ON                      LOW
+
+#define HAS_DISPLAY
+#define HAS_SDCARD
+
+#else
+#error "Please select the version you purchased in utilities.h"
+#endif
+
+
+
+
+
+
+
+
+