jlpoole/LilyGo-LoRa-Series
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

Update T3 V1.61 TXCO Board

Browse source
This commit is contained in:
lewishe 2023-10-23 10:21:17 +08:00
commit 634a2750cd
12 changed files with 317 additions and 17 deletions
Download patch file Download diff file Expand all files Collapse all files

8
examples/ArduinoLoRa/LoRaReceiver/boards.h
View file

@ -317,6 +317,14 @@ void initBoard()
Wire1.begin(I2C1_SDA, I2C1_SCL);
#endif
#ifdef RADIO_TXCO_ENABLE
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
pinMode(RADIO_TXCO_ENABLE, OUTPUT);
digitalWrite(RADIO_TXCO_ENABLE, HIGH);
#endif
#ifdef HAS_GPS
Serial1.begin(GPS_BAUD_RATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);

36
examples/ArduinoLoRa/LoRaReceiver/utilities.h
View file

@ -138,6 +138,42 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6_TXCO)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
#define RADIO_TXCO_ENABLE 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22

8
examples/ArduinoLoRa/LoRaSender/boards.h
View file

@ -317,6 +317,14 @@ void initBoard()
Wire1.begin(I2C1_SDA, I2C1_SCL);
#endif
#ifdef RADIO_TXCO_ENABLE
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
pinMode(RADIO_TXCO_ENABLE, OUTPUT);
digitalWrite(RADIO_TXCO_ENABLE, HIGH);
#endif
#ifdef HAS_GPS
Serial1.begin(GPS_BAUD_RATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);

36
examples/ArduinoLoRa/LoRaSender/utilities.h
View file

@ -138,6 +138,42 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6_TXCO)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
#define RADIO_TXCO_ENABLE 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22

36
examples/LoRaWAN/OTTA/utilities.h
View file

@ -135,6 +135,42 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6_TXCO)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
#define RADIO_TXCO_ENABLE 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22

48
examples/OLED/SSD1306SimpleDemo/utilities.h
View file

@ -1,22 +1,26 @@
#pragma once
/*
* This sample program only supports SX1276
* */
// #define LILYGO_TBeam_V0_7
// #define LILYGO_TBeam_V1_X
// #define LILYGO_T3_V1_0
// #define LILYGO_T3_V1_3
// #define LILYGO_T3_V1_6
// #define LILYGO_T3_V1_6_TXCO
// #define LILYGO_T3_V2_0
// #define LILYGO_T3_S3_V1_0
// #define LILYGO_T3_S3_V1_2
/*
* The default program uses 433MHz,
* The default program uses 868MHz,
* if you need to change it,
* please open this note and change to the frequency you need to test
* */
// #define LoRa_frequency 433.0
#define UNUSE_PIN (0)
@ -71,7 +75,7 @@
#define GPS_BAUD_RATE 9600
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#define HAS_PMU
#elif defined(LILYGO_T3_V1_0)
#define I2C_SDA 4
#define I2C_SCL 15
@ -135,6 +139,40 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6_TXCO)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
#define RADIO_TXCO_ENABLE 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22
@ -160,7 +198,7 @@
#define HAS_DISPLAY
#define HAS_SDCARD
#elif defined(LILYGO_T3_S3_V1_0)
#elif defined(LILYGO_T3_S3_V1_0) || defined(LILYGO_T3_S3_V1_2)
#define I2C_SDA 18
#define I2C_SCL 17

60
examples/OLED/SSD1306UiDemo/utilities.h
View file

@ -1,22 +1,26 @@
#pragma once
/*
* This sample program only supports SX1276
* */
// #define LILYGO_TBeam_V0_7
// #define LILYGO_TBeam_V1_X
// #define LILYGO_T3_V1_0
// #define LILYGO_T3_V1_3
// #define LILYGO_T3_V1_6
// #define LILYGO_T3_V1_6_TXCO
// #define LILYGO_T3_V2_0
// #define LILYGO_T3_S3_V1_0
// #define LILYGO_T3_S3_V1_2
/*
* The default program uses 433MHz,
* The default program uses 868MHz,
* if you need to change it,
* please open this note and change to the frequency you need to test
* */
// #define LoRa_frequency 433.0
#define UNUSE_PIN (0)
@ -71,7 +75,7 @@
#define GPS_BAUD_RATE 9600
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#define HAS_PMU
#elif defined(LILYGO_T3_V1_0)
#define I2C_SDA 4
#define I2C_SCL 15
@ -135,6 +139,40 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6_TXCO)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
#define RADIO_TXCO_ENABLE 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22
@ -159,7 +197,8 @@
#define HAS_DISPLAY
#define HAS_SDCARD
#elif defined(LILYGO_T3_S3_V1_0)
#elif defined(LILYGO_T3_S3_V1_0) || defined(LILYGO_T3_S3_V1_2)
#define I2C_SDA 18
#define I2C_SCL 17
@ -197,4 +236,13 @@
#else
#error "For the first use, please define the board version and model in <utilities. h>"
#endif
#endif

8
examples/RadioLibExamples/SX1276/SX1276_Receive_Interrupt/boards.h
View file

@ -318,6 +318,14 @@ void initBoard()
#endif
#ifdef RADIO_TXCO_ENABLE
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
pinMode(RADIO_TXCO_ENABLE, OUTPUT);
digitalWrite(RADIO_TXCO_ENABLE, HIGH);
#endif
#ifdef HAS_GPS

38
examples/RadioLibExamples/SX1276/SX1276_Receive_Interrupt/utilities.h
View file

@ -9,8 +9,10 @@
// #define LILYGO_T3_V1_0
// #define LILYGO_T3_V1_3
// #define LILYGO_T3_V1_6
// #define LILYGO_T3_V1_6_TXCO
// #define LILYGO_T3_V2_0
// #define LILYGO_T3_S3_V1_0
// #define LILYGO_T3_S3_V1_2
/*
@ -19,8 +21,6 @@
* please open this note and change to the frequency you need to test
* */
// #define LoRa_frequency 915.0
#define UNUSE_PIN (0)
@ -139,6 +139,40 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6_TXCO)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
#define RADIO_TXCO_ENABLE 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22

9
examples/RadioLibExamples/SX1276/SX1276_Transmit_Interrupt/boards.h
View file

@ -317,7 +317,14 @@ void initBoard()
Wire1.begin(I2C1_SDA, I2C1_SCL);
#endif
#ifdef RADIO_TXCO_ENABLE
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
pinMode(RADIO_TXCO_ENABLE, OUTPUT);
digitalWrite(RADIO_TXCO_ENABLE, HIGH);
#endif
#ifdef HAS_GPS

35
examples/RadioLibExamples/SX1276/SX1276_Transmit_Interrupt/utilities.h
View file

@ -9,6 +9,7 @@
// #define LILYGO_T3_V1_0
// #define LILYGO_T3_V1_3
// #define LILYGO_T3_V1_6
// #define LILYGO_T3_V1_6_TXCO
// #define LILYGO_T3_V2_0
// #define LILYGO_T3_S3_V1_0
// #define LILYGO_T3_S3_V1_2
@ -138,6 +139,40 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6_TXCO)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
/*
* In the T3 V1.6.1 TXCO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
#define RADIO_TXCO_ENABLE 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22

12
platformio.ini
View file

@ -23,10 +23,11 @@
; default_envs = T3_V1_0
; default_envs = T3_V1_3
; default_envs = T3_V1_6
default_envs = T3_V1_6_TXCO
; default_envs = T3_V1_8
; default_envs = T3_V2_0
; default_envs = T_BEAM_V0_7
default_envs = T_BEAM_V1_x
; default_envs = T_BEAM_V1_x
; default_envs = t-beams3-supreme
; default_envs = T3_S3_V1_1_SX1268
; default_envs = T3_S3_V1_1_SX1278
@ -60,7 +61,7 @@ default_envs = T_BEAM_V1_x
; src_dir = examples/Display/Free_Font_Demo
; src_dir = examples/Display/TFT_Char_times
; src_dir = examples/Display/UTFT_demo
src_dir = examples/Display/TBeam_TFT_Shield
; src_dir = examples/Display/TBeam_TFT_Shield
@ -71,7 +72,7 @@ src_dir = examples/Display/TBeam_TFT_Shield
; src_dir = examples/RadioLibExamples/SX1268/SX1268_Transmit_Interrupt
; src_dir = examples/RadioLibExamples/SX1276/SX1276_Receive_Interrupt
; src_dir = examples/RadioLibExamples/SX1276/SX1276_Transmit_Interrupt
src_dir = examples/RadioLibExamples/SX1276/SX1276_Transmit_Interrupt
; src_dir = examples/RadioLibExamples/SX1278/SX1278_Receive
; src_dir = examples/RadioLibExamples/SX1278/SX1278_Receive_Interrupt
@ -166,6 +167,11 @@ board = esp32dev
build_flags = ${esp32dev_base.build_flags}
-DLILYGO_T3_V1_6
[env:T3_V1_6_TXCO]
board = esp32dev
build_flags = ${esp32dev_base.build_flags}
-DLILYGO_T3_V1_6_TXCO
[env:T3_V1_8]
board = esp32dev
build_flags = ${esp32dev_base.build_flags}