Update ini

platformio.ini

@@ -19,11 +19,12 @@
 ; default_envs = T3_V1_3_SX1276
 ; default_envs = T3_V1_3_SX1278
 
-default_envs = T3_V1_6_SX1276
+; default_envs = T3_V1_6_SX1276
 ; default_envs = T3_V1_6_SX1278
 
 ; default_envs = T3_V1_6_SX1276_TCXO            ; Not support LoRaWAN
 
+
 ; default_envs = T_BEAM_SX1262
 ; default_envs = T_BEAM_SX1276
 ; default_envs = T_BEAM_SX1278
@@ -40,6 +41,13 @@ default_envs = T3_V1_6_SX1276
 
 ; default_envs = T3_C6_SX1262
 
+default_envs =  T3_V3_0_SX1276_TCXO
+; default_envs =  T3_V3_0_SX1278
+; default_envs =  T3_V3_0_SX1262
+; default_envs =  T3_V3_0_LR1121
+
+
+; default_envs = T3_S3_V1_2_SX1262 , T3_S3_V1_2_SX1276 , T3_S3_V1_2_LR1121
 
 ; !!!! EXAMPLES !!!! EXAMPLES !!!! EXAMPLES
 
@@ -72,7 +80,7 @@ default_envs = T3_V1_6_SX1276
 
 ; ! Radio examples suitable for all boards
 ; src_dir = examples/ArduinoLoRa/LoRaReceiver
-src_dir = examples/ArduinoLoRa/LoRaSender
+; src_dir = examples/ArduinoLoRa/LoRaSender
 ; src_dir = examples/RadioLibExamples/Receive_Interrupt
 ; src_dir = examples/RadioLibExamples/Transmit_Interrupt
 
@@ -105,7 +113,7 @@ src_dir = examples/ArduinoLoRa/LoRaSender
 ; src_dir = examples/Sensor/QMI8658_WakeOnMotion
 
 ; ! T3 factory examples just only support T3_S3
-; src_dir = examples/T3S3Factory
+src_dir = examples/T3S3Factory
 
 boards_dir = boards
 
@@ -129,7 +137,7 @@ build_flags =
     ${env.build_flags}
     -DARDUINO_USB_CDC_ON_BOOT=1
     ; -UARDUINO_USB_CDC_ON_BOOT
-    -DCORE_DEBUG_LEVEL=0
+    -DCORE_DEBUG_LEVEL=4
 
 [env:T3_V1_3_SX1276]
 board = esp32dev
@@ -159,7 +167,26 @@ build_flags = ${esp32_base.build_flags}
 [env:T3_V3_0_SX1276_TCXO]
 board = esp32dev
 build_flags = ${esp32_base.build_flags}
-    -DT3_V3_0_SX1276_TCXO
+    -DT3_V3_0
+    -DUSING_SX1276
+
+[env:T3_V3_0_SX1278]
+board = esp32dev
+build_flags = ${esp32_base.build_flags}
+    -DT3_V3_0
+    -DUSING_SX1278
+
+[env:T3_V3_0_SX1262]
+board = esp32dev
+build_flags = ${esp32_base.build_flags}
+    -DT3_V3_0
+    -DUSING_SX1262
+
+[env:T3_V3_0_LR1121]
+board = esp32dev
+build_flags = ${esp32_base.build_flags}
+    -DT3_V3_0
+    -DUSING_LR1121
 
 [env:T_BEAM_SX1262]
 board = esp32dev