jlpoole/LilyGo-LoRa-Series
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

Update examples

Browse source
This commit is contained in:
lewisxhe 2024-05-15 17:58:37 +08:00
commit a45c3b1784
276 changed files with 66091 additions and 48794 deletions
Download patch file Download diff file Expand all files Collapse all files

1057
examples/ArduinoLoRa/LoRaReceiver/boards.h → examples/ArduinoLoRa/LoRaReceiver/LoRaBoards.cpp
View file

File diff suppressed because it is too large Load diff

94
examples/ArduinoLoRa/LoRaReceiver/LoRaBoards.h Normal file
View file

@ -0,0 +1,94 @@
/**
* @file boards.h
* @author Lewis He (lewishe@outlook.com)
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-04-25
*
*/
#pragma once
#include "utilities.h"
#ifdef HAS_SDCARD
#include <SD.h>
#endif
#if defined(ARDUINO_ARCH_ESP32)
#include <FS.h>
#include <WiFi.h>
#endif
#include <Arduino.h>
#include <SPI.h>
#include <Wire.h>
#include <U8g2lib.h>
#include <XPowersLib.h>
#ifndef DISPLAY_MODEL
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
#endif
#ifndef OLED_WIRE_PORT
#define OLED_WIRE_PORT Wire
#endif
#ifndef PMU_WIRE_PORT
#define PMU_WIRE_PORT Wire
#endif
#ifndef DISPLAY_ADDR
#define DISPLAY_ADDR 0x3C
#endif
#ifndef LORA_FREQ_CONFIG
#define LORA_FREQ_CONFIG 915.0
#endif
typedef struct {
String chipModel;
float psramSize;
uint8_t chipModelRev;
uint8_t chipFreq;
uint8_t flashSize;
uint8_t flashSpeed;
} DevInfo_t;
void setupBoards();
bool beginSDCard();
bool beginDisplay();
void disablePeripherals();
bool beginPower();
void printResult(bool radio_online);
void flashLed();
extern XPowersLibInterface *PMU;
extern DISPLAY_MODEL *u8g2;
extern bool pmuInterrupt;
#define U8G2_HOR_ALIGN_CENTER(t) ((u8g2->getDisplayWidth() - (u8g2->getUTF8Width(t))) / 2)
#define U8G2_HOR_ALIGN_RIGHT(t) ( u8g2->getDisplayWidth() - u8g2->getUTF8Width(t))
#if defined(ARDUINO_ARCH_ESP32)
#if defined(HAS_SDCARD)
extern SPIClass SDCardSPI;
#endif
#define SerialGPS Serial1
#elif defined(ARDUINO_ARCH_STM32)
extern HardwareSerial SerialGPS;
#endif

15
examples/ArduinoLoRa/LoRaReceiver/LoRaReceiver.ino
View file

@ -1,17 +1,22 @@
// Only supports SX1276/SX1278
#include <LoRa.h>
#include "boards.h"
#include "LoRaBoards.h"
void setup()
{
initBoard();
setupBoards();
// When the power is turned on, a delay is required.
delay(1500);
Serial.println("LoRa Receiver");
#ifdef RADIO_TCXO_ENABLE
pinMode(RADIO_TCXO_ENABLE, OUTPUT);
digitalWrite(RADIO_TCXO_ENABLE, HIGH);
#endif
LoRa.setPins(RADIO_CS_PIN, RADIO_RST_PIN, RADIO_DIO0_PIN);
if (!LoRa.begin(LoRa_frequency)) {
if (!LoRa.begin(LORA_FREQ_CONFIG)) {
Serial.println("Starting LoRa failed!");
while (1);
}
@ -36,7 +41,6 @@ void loop()
// print RSSI of packet
Serial.print("' with RSSI ");
Serial.println(LoRa.packetRssi());
#ifdef HAS_DISPLAY
if (u8g2) {
u8g2->clearBuffer();
char buf[256];
@ -48,6 +52,5 @@ void loop()
u8g2->drawStr(0, 56, buf);
u8g2->sendBuffer();
}
#endif
}
}

459
examples/ArduinoLoRa/LoRaReceiver/utilities.h
View file

@ -1,55 +1,62 @@
/**
* @file utilities.h
* @author Lewis He (lewishe@outlook.com)
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
*
*/
#pragma once
/*
* arduinoLoRa Library just only support SX1276/Sx1278,Not support SX1262
* RadioLib Library supports also SX1262/SX1268 see https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/tree/master/examples/RadioLibExamples
* */
// #define LILYGO_TBeam_V0_7
// #define LILYGO_TBeam_V1_X
// #define LILYGO_T3_V1_0
// #define LILYGO_T3_V1_3
// #define LILYGO_T3_V1_6
// #define LILYGO_T3_V2_0
// #define LILYGO_T95_V1_0
/*
* if you need to change it,
* please open this note and change to the frequency you need to test
* Option: 433E6,470E6,868E6,915E6
* */
// Support board list , Macro definition below, select the board definition to be used
#define LoRa_frequency 433E6
// #define T3_V1_3_SX1276
// #define T3_V1_3_SX1278
// #define T3_V1_6_SX1276
// #define T3_V1_6_SX1278
// #define T3_V1_6_SX1276_TCXO
// #define T3_V3_0_SX1276_TCXO
// #define T_BEAM_SX1262
// #define T_BEAM_SX1276
// #define T_BEAM_SX1278
// #define T_BEAM_S3_SUPREME
// #define T3_S3_V1_2_SX1262
// #define T3_S3_V1_2_SX1276
// #define T3_S3_V1_2_SX1278
// #define T3_S3_V1_2_SX1280
// #define T3_S3_V1_2_SX1280_PA
// #define T3_S3_V1_2_LR1121
// #define T_MOTION
// #define T3_C6
#define UNUSE_PIN (0)
#define UNUSED_PIN (0)
#if defined(LILYGO_TBeam_V0_7)
#define GPS_RX_PIN 12
#define GPS_TX_PIN 15
#define BUTTON_PIN 39
#define BUTTON_PIN_MASK GPIO_SEL_39
#define I2C_SDA 21
#define I2C_SCL 22
#if defined(T_BEAM_SX1262) || defined(T_BEAM_SX1276) || defined(T_BEAM_SX1278)
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define BOARD_LED 14
#define LED_ON HIGH
#define LED_OFF LOW
#if defined(T_BEAM_SX1262)
#ifndef USING_SX1262
#define USING_SX1262
#endif
#elif defined(T_BEAM_SX1276)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(T_BEAM_SX1278)
#ifndef USING_SX1278
#define USING_SX1278
#endif
#endif // T_BEAM_SX1262
#define GPS_BAUD_RATE 9600
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#elif defined(LILYGO_TBeam_V1_X)
#define GPS_RX_PIN 34
#define GPS_TX_PIN 12
@ -63,11 +70,15 @@
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
// SX1276/78
#define RADIO_DIO2_PIN 32
// SX1262
#define RADIO_BUSY_PIN 32
#define BOARD_LED 4
#define LED_ON LOW
#define LED_OFF HIGH
@ -76,27 +87,31 @@
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#define HAS_PMU
#elif defined(LILYGO_T3_V1_0)
#define I2C_SDA 4
#define I2C_SCL 15
#define OLED_RST 16
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define BOARD_VARIANT_NAME "T-Beam"
#elif defined(T3_V1_3_SX1276) || defined(T3_V1_3_SX1278)
#if defined(T3_V1_3_SX1276)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(T3_V1_3_SX1278)
#ifndef USING_SX1278
#define USING_SX1278
#endif
#endif // T3_V1_3_SX1276
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_3)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
@ -105,24 +120,44 @@
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN 33
// SX1276/78
#define RADIO_DIO2_PIN 32
// SX1262
#define RADIO_BUSY_PIN 32
#define ADC_PIN 35
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 V1.3"
#elif defined(T3_V1_6_SX1276) || defined(T3_V1_6_SX1278)
#if defined(T3_V1_6_SX1276)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(T3_V1_6_SX1278)
#ifndef USING_SX1278
#define USING_SX1278
#endif
#endif // T3_V1_6_SX1276
#elif defined(LILYGO_T3_V1_6)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
// SX1276/78
#define RADIO_DIO2_PIN 32
// SX1262
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
@ -138,13 +173,18 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 V1.6"
#elif defined(LILYGO_T3_V1_6_TCXO)
#elif defined(T3_V1_6_SX1276_TCXO)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
@ -152,11 +192,12 @@
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
#define RADIO_DIO1_PIN -1//33
/*
* In the T3 V1.6.1 TCXO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
// TCXO pin must be set to HIGH before enabling Radio
#define RADIO_TCXO_ENABLE 33
#define RADIO_BUSY_PIN 32
@ -173,53 +214,285 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 V1.6 TCXO"
#elif defined(T3_V3_0_SX1276_TCXO)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN UNUSE_PIN
#define RADIO_BUSY_PIN UNUSE_PIN
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
// TCXO pin must be set to HIGH before enabling Radio
#define RADIO_TCXO_ENABLE 12
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 0
#define LED_ON LOW
#define HAS_DISPLAY
#define HAS_SDCARD
#elif defined(LILYGO_T95_V1_0)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 18
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 23
#define RADIO_CS_PIN 5
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 4
#define RADIO_DIO1_PIN 33
#define RADIO_DIO2_PIN 32
#define RADIO_BUSY_PIN UNUSE_PIN
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 V3.0 TCXO"
#elif defined(T3_S3_V1_2_SX1262) || \
defined(T3_S3_V1_2_SX1276) || \
defined(T3_S3_V1_2_SX1278) || \
defined(T3_S3_V1_2_SX1280) || \
defined(T3_S3_V1_2_SX1280_PA) || \
defined(T3_S3_V1_2_LR1121)
#if defined(T3_S3_V1_2_SX1262)
#ifndef USING_SX1262
#define USING_SX1262
#endif
#elif defined(T3_S3_V1_2_SX1276)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(T3_S3_V1_2_SX1278)
#ifndef USING_SX1278
#define USING_SX1278
#endif
#elif defined(T3_S3_V1_2_SX1280)
#ifndef USING_SX1280
#define USING_SX1280
#endif
#elif defined(T3_S3_V1_2_SX1280_PA)
#ifndef USING_SX1280
#define USING_SX1280
#endif
#elif defined(T3_S3_V1_2_LR1121)
#ifndef USING_LR1121
#define USING_LR1121
#endif
#endif // T3_S3_V1_2_SX1262
#define I2C_SDA 18
#define I2C_SCL 17
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 3
#define RADIO_MOSI_PIN 6
#define RADIO_CS_PIN 7
#define SDCARD_MOSI 11
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 37
#define LED_ON HIGH
#define BAT_ADC_PIN 1
#define BUTTON_PIN 0
#define RADIO_RST_PIN 8
#if defined(T3_S3_V1_2_SX1262)
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 34
#elif defined(T3_S3_V1_2_SX1276) || defined(T3_S3_V1_2_SX1278)
//!SX1276/78 module only
#define RADIO_BUSY_PIN 33 //DIO1
#define RADIO_DIO0_PIN 9
#define RADIO_DIO1_PIN 33
#define RADIO_DIO2_PIN 34
#define RADIO_DIO3_PIN 21
#define RADIO_DIO4_PIN 10
#define RADIO_DIO5_PIN 36
#elif defined(T3_S3_V1_2_SX1280)
#define RADIO_DIO1_PIN 9 //SX1280 DIO1 = IO9
#define RADIO_BUSY_PIN 36 //SX1280 BUSY = IO36
#elif defined(T3_S3_V1_2_SX1280_PA)
#define RADIO_DIO1_PIN 9 //SX1280 DIO1 = IO9
#define RADIO_BUSY_PIN 36 //SX1280 BUSY = IO36
#define RADIO_RX_PIN 21
#define RADIO_TX_PIN 10
#elif defined(T3_S3_V1_2_LR1121)
#define RADIO_DIO9_PIN 36 //LR1121 DIO9 = IO36
#define RADIO_BUSY_PIN 34 //LR1121 BUSY = IO33
#endif
#define HAS_SDCARD
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 S3 V1.X"
#elif defined(T_BEAM_S3_SUPREME)
#ifndef USING_SX1262
#define USING_SX1262
#endif
#define I2C_SDA 17
#define I2C_SCL 18
#define I2C1_SDA 42
#define I2C1_SCL 41
#define PMU_IRQ 40
#define GPS_RX_PIN 9
#define GPS_TX_PIN 8
#define GPS_WAKEUP_PIN 7
#define GPS_PPS_PIN 6
#define BUTTON_PIN 0
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_CONUT (1)
#define BUTTON_ARRAY {BUTTON_PIN}
#define RADIO_SCLK_PIN (12)
#define RADIO_MISO_PIN (13)
#define RADIO_MOSI_PIN (11)
#define RADIO_CS_PIN (10)
#define RADIO_DIO0_PIN (-1)
#define RADIO_RST_PIN (5)
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (4)
#define SPI_MOSI (35)
#define SPI_SCK (36)
#define SPI_MISO (37)
#define SPI_CS (47)
#define IMU_CS (34)
#define IMU_INT (33)
#define SDCARD_MOSI SPI_MOSI
#define SDCARD_MISO SPI_MISO
#define SDCARD_SCLK SPI_SCK
#define SDCARD_CS SPI_CS
#define PIN_NONE (-1)
#define RTC_INT (14)
#define GPS_BAUD_RATE 9600
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define __HAS_SPI1__
#define __HAS_SENSOR__
#define PMU_WIRE_PORT Wire1
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define BOARD_VARIANT_NAME "T-Beam S3"
#elif defined(T_MOTION_S76G)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#define RADIO_SCLK_PIN PB13
#define RADIO_MISO_PIN PB14
#define RADIO_MOSI_PIN PB15
#define RADIO_CS_PIN PB12
#define RADIO_RST_PIN PB10
#define RADIO_DIO0_PIN PB11
#define RADIO_DIO1_PIN PC13
#define RADIO_DIO2_PIN PB9
#define RADIO_DIO3_PIN PB4
#define RADIO_DIO4_PIN PB3
#define RADIO_DIO5_PIN PA15
#undef RADIO_BUSY_PIN
#undef RADIO_DIO1_PIN
#define RADIO_BUSY_PIN PC13 //DIO1
#define RADIO_DIO1_PIN PB11 //DIO0
#define RADIO_SWITCH_PIN PA1 //1:Rx, 0:Tx
#define GPS_EN_PIN PC6
#define GPS_RST_PIN PB2
#define GPS_RX_PIN PC11
#define GPS_TX_PIN PC10
#define GPS_ENABLE_PIN PC6
#define GPS_BAUD_RATE 115200
#define GPS_PPS_PIN PB5
#define UART_RX_PIN PA10
#define UART_TX_PIN PA9
#define I2C_SCL PB6
#define I2C_SDA PB7
#define BOARD_VARIANT_NAME "T-Motion S76G"
#define HAS_GPS
#elif defined(T3_C6)
#ifndef USING_SX1262
#define USING_SX1262
#endif
#define RADIO_SCLK_PIN 6
#define RADIO_MISO_PIN 1
#define RADIO_MOSI_PIN 0
#define RADIO_CS_PIN 18
#define RADIO_DIO1_PIN 23
#define RADIO_BUSY_PIN 22
#define RADIO_RST_PIN 21
#define I2C_SDA 8
#define I2C_SCL 9
#define BOARD_LED 7
#define LED_ON HIGH
#define RADIO_RX_PIN 15
#define RADIO_TX_PIN 14
#define BOARD_VARIANT_NAME "T3-C6"
#define USING_DIO2_AS_RF_SWITCH
#else
#error "For the first use, please define the board version and model in <utilities. h>"
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

1048
examples/ArduinoLoRa/LoRaSender/boards.h → examples/ArduinoLoRa/LoRaSender/LoRaBoards.cpp
View file

File diff suppressed because it is too large Load diff

94
examples/ArduinoLoRa/LoRaSender/LoRaBoards.h Normal file
View file

@ -0,0 +1,94 @@
/**
* @file boards.h
* @author Lewis He (lewishe@outlook.com)
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-04-25
*
*/
#pragma once
#include "utilities.h"
#ifdef HAS_SDCARD
#include <SD.h>
#endif
#if defined(ARDUINO_ARCH_ESP32)
#include <FS.h>
#include <WiFi.h>
#endif
#include <Arduino.h>
#include <SPI.h>
#include <Wire.h>
#include <U8g2lib.h>
#include <XPowersLib.h>
#ifndef DISPLAY_MODEL
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
#endif
#ifndef OLED_WIRE_PORT
#define OLED_WIRE_PORT Wire
#endif
#ifndef PMU_WIRE_PORT
#define PMU_WIRE_PORT Wire
#endif
#ifndef DISPLAY_ADDR
#define DISPLAY_ADDR 0x3C
#endif
#ifndef LORA_FREQ_CONFIG
#define LORA_FREQ_CONFIG 915.0
#endif
typedef struct {
String chipModel;
float psramSize;
uint8_t chipModelRev;
uint8_t chipFreq;
uint8_t flashSize;
uint8_t flashSpeed;
} DevInfo_t;
void setupBoards();
bool beginSDCard();
bool beginDisplay();
void disablePeripherals();
bool beginPower();
void printResult(bool radio_online);
void flashLed();
extern XPowersLibInterface *PMU;
extern DISPLAY_MODEL *u8g2;
extern bool pmuInterrupt;
#define U8G2_HOR_ALIGN_CENTER(t) ((u8g2->getDisplayWidth() - (u8g2->getUTF8Width(t))) / 2)
#define U8G2_HOR_ALIGN_RIGHT(t) ( u8g2->getDisplayWidth() - u8g2->getUTF8Width(t))
#if defined(ARDUINO_ARCH_ESP32)
#if defined(HAS_SDCARD)
extern SPIClass SDCardSPI;
#endif
#define SerialGPS Serial1
#elif defined(ARDUINO_ARCH_STM32)
extern HardwareSerial SerialGPS;
#endif

14
examples/ArduinoLoRa/LoRaSender/LoRaSender.ino
View file

@ -1,17 +1,23 @@
// Only supports SX1276/SX1278
#include <LoRa.h>
#include "boards.h"
#include "LoRaBoards.h"
int counter = 0;
void setup()
{
initBoard();
setupBoards();
// When the power is turned on, a delay is required.
delay(1500);
#ifdef RADIO_TCXO_ENABLE
pinMode(RADIO_TCXO_ENABLE, OUTPUT);
digitalWrite(RADIO_TCXO_ENABLE, HIGH);
#endif
Serial.println("LoRa Sender");
LoRa.setPins(RADIO_CS_PIN, RADIO_RST_PIN, RADIO_DIO0_PIN);
if (!LoRa.begin(LoRa_frequency)) {
if (!LoRa.begin(LORA_FREQ_CONFIG)) {
Serial.println("Starting LoRa failed!");
while (1);
}
@ -28,7 +34,6 @@ void loop()
LoRa.print(counter);
LoRa.endPacket();
#ifdef HAS_DISPLAY
if (u8g2) {
char buf[256];
u8g2->clearBuffer();
@ -37,7 +42,6 @@ void loop()
u8g2->drawStr(0, 30, buf);
u8g2->sendBuffer();
}
#endif
counter++;
delay(5000);
}

459
examples/ArduinoLoRa/LoRaSender/utilities.h
View file

@ -1,55 +1,62 @@
/**
* @file utilities.h
* @author Lewis He (lewishe@outlook.com)
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
*
*/
#pragma once
/*
* arduinoLoRa Library just only support SX1276/Sx1278,Not support SX1262
* RadioLib Library supports also SX1262/SX1268 see https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/tree/master/examples/RadioLibExamples
* */
// #define LILYGO_TBeam_V0_7
// #define LILYGO_TBeam_V1_X
// #define LILYGO_T3_V1_0
// #define LILYGO_T3_V1_3
// #define LILYGO_T3_V1_6
// #define LILYGO_T3_V2_0
// #define LILYGO_T95_V1_0
/*
* if you need to change it,
* please open this note and change to the frequency you need to test
* Option: 433E6,470E6,868E6,915E6
* */
// Support board list , Macro definition below, select the board definition to be used
#define LoRa_frequency 433E6
// #define T3_V1_3_SX1276
// #define T3_V1_3_SX1278
// #define T3_V1_6_SX1276
// #define T3_V1_6_SX1278
// #define T3_V1_6_SX1276_TCXO
// #define T3_V3_0_SX1276_TCXO
// #define T_BEAM_SX1262
// #define T_BEAM_SX1276
// #define T_BEAM_SX1278
// #define T_BEAM_S3_SUPREME
// #define T3_S3_V1_2_SX1262
// #define T3_S3_V1_2_SX1276
// #define T3_S3_V1_2_SX1278
// #define T3_S3_V1_2_SX1280
// #define T3_S3_V1_2_SX1280_PA
// #define T3_S3_V1_2_LR1121
// #define T_MOTION
// #define T3_C6
#define UNUSE_PIN (0)
#define UNUSED_PIN (0)
#if defined(LILYGO_TBeam_V0_7)
#define GPS_RX_PIN 12
#define GPS_TX_PIN 15
#define BUTTON_PIN 39
#define BUTTON_PIN_MASK GPIO_SEL_39
#define I2C_SDA 21
#define I2C_SCL 22
#if defined(T_BEAM_SX1262) || defined(T_BEAM_SX1276) || defined(T_BEAM_SX1278)
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define BOARD_LED 14
#define LED_ON HIGH
#define LED_OFF LOW
#if defined(T_BEAM_SX1262)
#ifndef USING_SX1262
#define USING_SX1262
#endif
#elif defined(T_BEAM_SX1276)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(T_BEAM_SX1278)
#ifndef USING_SX1278
#define USING_SX1278
#endif
#endif // T_BEAM_SX1262
#define GPS_BAUD_RATE 9600
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#elif defined(LILYGO_TBeam_V1_X)
#define GPS_RX_PIN 34
#define GPS_TX_PIN 12
@ -63,11 +70,15 @@
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
// SX1276/78
#define RADIO_DIO2_PIN 32
// SX1262
#define RADIO_BUSY_PIN 32
#define BOARD_LED 4
#define LED_ON LOW
#define LED_OFF HIGH
@ -77,27 +88,30 @@
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#define HAS_PMU
#elif defined(LILYGO_T3_V1_0)
#define I2C_SDA 4
#define I2C_SCL 15
#define OLED_RST 16
#define BOARD_VARIANT_NAME "T-Beam"
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#elif defined(T3_V1_3_SX1276) || defined(T3_V1_3_SX1278)
#if defined(T3_V1_3_SX1276)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(T3_V1_3_SX1278)
#ifndef USING_SX1278
#define USING_SX1278
#endif
#endif // T3_V1_3_SX1276
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_3)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
@ -106,23 +120,44 @@
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN 33
// SX1276/78
#define RADIO_DIO2_PIN 32
// SX1262
#define RADIO_BUSY_PIN 32
#define ADC_PIN 35
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6)
#define BOARD_VARIANT_NAME "T3 V1.3"
#elif defined(T3_V1_6_SX1276) || defined(T3_V1_6_SX1278)
#if defined(T3_V1_6_SX1276)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(T3_V1_6_SX1278)
#ifndef USING_SX1278
#define USING_SX1278
#endif
#endif // T3_V1_6_SX1276
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
// SX1276/78
#define RADIO_DIO2_PIN 32
// SX1262
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
@ -138,13 +173,18 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 V1.6"
#elif defined(LILYGO_T3_V1_6_TCXO)
#elif defined(T3_V1_6_SX1276_TCXO)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
@ -152,11 +192,12 @@
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
// #define RADIO_DIO1_PIN 33
#define RADIO_DIO1_PIN -1//33
/*
* In the T3 V1.6.1 TCXO version, Radio DIO1 is connected to Radio’s
* internal temperature-compensated crystal oscillator enable
* */
// TCXO pin must be set to HIGH before enabling Radio
#define RADIO_TCXO_ENABLE 33
#define RADIO_BUSY_PIN 32
@ -173,53 +214,285 @@
#define HAS_SDCARD
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 V1.6 TCXO"
#elif defined(T3_V3_0_SX1276_TCXO)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN UNUSE_PIN
#define RADIO_BUSY_PIN UNUSE_PIN
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
// TCXO pin must be set to HIGH before enabling Radio
#define RADIO_TCXO_ENABLE 12
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 0
#define LED_ON LOW
#define HAS_DISPLAY
#define HAS_SDCARD
#elif defined(LILYGO_T95_V1_0)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 18
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 23
#define RADIO_CS_PIN 5
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 4
#define RADIO_DIO1_PIN 33
#define RADIO_DIO2_PIN 32
#define RADIO_BUSY_PIN UNUSE_PIN
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 V3.0 TCXO"
#elif defined(T3_S3_V1_2_SX1262) || \
defined(T3_S3_V1_2_SX1276) || \
defined(T3_S3_V1_2_SX1278) || \
defined(T3_S3_V1_2_SX1280) || \
defined(T3_S3_V1_2_SX1280_PA) || \
defined(T3_S3_V1_2_LR1121)
#if defined(T3_S3_V1_2_SX1262)
#ifndef USING_SX1262
#define USING_SX1262
#endif
#elif defined(T3_S3_V1_2_SX1276)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#elif defined(T3_S3_V1_2_SX1278)
#ifndef USING_SX1278
#define USING_SX1278
#endif
#elif defined(T3_S3_V1_2_SX1280)
#ifndef USING_SX1280
#define USING_SX1280
#endif
#elif defined(T3_S3_V1_2_SX1280_PA)
#ifndef USING_SX1280
#define USING_SX1280
#endif
#elif defined(T3_S3_V1_2_LR1121)
#ifndef USING_LR1121
#define USING_LR1121
#endif
#endif // T3_S3_V1_2_SX1262
#define I2C_SDA 18
#define I2C_SCL 17
#define OLED_RST UNUSED_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 3
#define RADIO_MOSI_PIN 6
#define RADIO_CS_PIN 7
#define SDCARD_MOSI 11
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 37
#define LED_ON HIGH
#define BAT_ADC_PIN 1
#define BUTTON_PIN 0
#define RADIO_RST_PIN 8
#if defined(T3_S3_V1_2_SX1262)
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 34
#elif defined(T3_S3_V1_2_SX1276) || defined(T3_S3_V1_2_SX1278)
//!SX1276/78 module only
#define RADIO_BUSY_PIN 33 //DIO1
#define RADIO_DIO0_PIN 9
#define RADIO_DIO1_PIN 33
#define RADIO_DIO2_PIN 34
#define RADIO_DIO3_PIN 21
#define RADIO_DIO4_PIN 10
#define RADIO_DIO5_PIN 36
#elif defined(T3_S3_V1_2_SX1280)
#define RADIO_DIO1_PIN 9 //SX1280 DIO1 = IO9
#define RADIO_BUSY_PIN 36 //SX1280 BUSY = IO36
#elif defined(T3_S3_V1_2_SX1280_PA)
#define RADIO_DIO1_PIN 9 //SX1280 DIO1 = IO9
#define RADIO_BUSY_PIN 36 //SX1280 BUSY = IO36
#define RADIO_RX_PIN 21
#define RADIO_TX_PIN 10
#elif defined(T3_S3_V1_2_LR1121)
#define RADIO_DIO9_PIN 36 //LR1121 DIO9 = IO36
#define RADIO_BUSY_PIN 34 //LR1121 BUSY = IO33
#endif
#define HAS_SDCARD
#define HAS_DISPLAY
#define BOARD_VARIANT_NAME "T3 S3 V1.X"
#elif defined(T_BEAM_S3_SUPREME)
#ifndef USING_SX1262
#define USING_SX1262
#endif
#define I2C_SDA 17
#define I2C_SCL 18
#define I2C1_SDA 42
#define I2C1_SCL 41
#define PMU_IRQ 40
#define GPS_RX_PIN 9
#define GPS_TX_PIN 8
#define GPS_WAKEUP_PIN 7
#define GPS_PPS_PIN 6
#define BUTTON_PIN 0
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_CONUT (1)
#define BUTTON_ARRAY {BUTTON_PIN}
#define RADIO_SCLK_PIN (12)
#define RADIO_MISO_PIN (13)
#define RADIO_MOSI_PIN (11)
#define RADIO_CS_PIN (10)
#define RADIO_DIO0_PIN (-1)
#define RADIO_RST_PIN (5)
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (4)
#define SPI_MOSI (35)
#define SPI_SCK (36)
#define SPI_MISO (37)
#define SPI_CS (47)
#define IMU_CS (34)
#define IMU_INT (33)
#define SDCARD_MOSI SPI_MOSI
#define SDCARD_MISO SPI_MISO
#define SDCARD_SCLK SPI_SCK
#define SDCARD_CS SPI_CS
#define PIN_NONE (-1)
#define RTC_INT (14)
#define GPS_BAUD_RATE 9600
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define __HAS_SPI1__
#define __HAS_SENSOR__
#define PMU_WIRE_PORT Wire1
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define BOARD_VARIANT_NAME "T-Beam S3"
#elif defined(T_MOTION_S76G)
#ifndef USING_SX1276
#define USING_SX1276
#endif
#define RADIO_SCLK_PIN PB13
#define RADIO_MISO_PIN PB14
#define RADIO_MOSI_PIN PB15
#define RADIO_CS_PIN PB12
#define RADIO_RST_PIN PB10
#define RADIO_DIO0_PIN PB11
#define RADIO_DIO1_PIN PC13
#define RADIO_DIO2_PIN PB9
#define RADIO_DIO3_PIN PB4
#define RADIO_DIO4_PIN PB3
#define RADIO_DIO5_PIN PA15
#undef RADIO_BUSY_PIN
#undef RADIO_DIO1_PIN
#define RADIO_BUSY_PIN PC13 //DIO1
#define RADIO_DIO1_PIN PB11 //DIO0
#define RADIO_SWITCH_PIN PA1 //1:Rx, 0:Tx
#define GPS_EN_PIN PC6
#define GPS_RST_PIN PB2
#define GPS_RX_PIN PC11
#define GPS_TX_PIN PC10
#define GPS_ENABLE_PIN PC6
#define GPS_BAUD_RATE 115200
#define GPS_PPS_PIN PB5
#define UART_RX_PIN PA10
#define UART_TX_PIN PA9
#define I2C_SCL PB6
#define I2C_SDA PB7
#define BOARD_VARIANT_NAME "T-Motion S76G"
#define HAS_GPS
#elif defined(T3_C6)
#ifndef USING_SX1262
#define USING_SX1262
#endif
#define RADIO_SCLK_PIN 6
#define RADIO_MISO_PIN 1
#define RADIO_MOSI_PIN 0
#define RADIO_CS_PIN 18
#define RADIO_DIO1_PIN 23
#define RADIO_BUSY_PIN 22
#define RADIO_RST_PIN 21
#define I2C_SDA 8
#define I2C_SCL 9
#define BOARD_LED 7
#define LED_ON HIGH
#define RADIO_RX_PIN 15
#define RADIO_TX_PIN 14
#define BOARD_VARIANT_NAME "T3-C6"
#define USING_DIO2_AS_RF_SWITCH
#else
#error "For the first use, please define the board version and model in <utilities. h>"
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif