Update examples
This commit is contained in:
lewisxhe
parent
e1e89bc044
commit
a45c3b1784
276 changed files with 66091 additions and 48794 deletions
619
examples/ArduinoLoRa/LoRaReceiver/LoRaBoards.cpp
Normal file
619
examples/ArduinoLoRa/LoRaReceiver/LoRaBoards.cpp
Normal file
|
|
@ -0,0 +1,619 @@
|
|||
/**
|
||||
* @file boards.cpp
|
||||
* @author Lewis He (lewishe@outlook.com)
|
||||
* @license MIT
|
||||
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
|
||||
* @date 2024-04-24
|
||||
*
|
||||
*/
|
||||
|
||||
#include "LoRaBoards.h"
|
||||
|
||||
#if defined(HAS_SDCARD)
|
||||
SPIClass SDCardSPI(HSPI);
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(ARDUINO_ARCH_STM32)
|
||||
HardwareSerial SerialGPS(GPS_RX_PIN, GPS_TX_PIN);
|
||||
#endif
|
||||
|
||||
#if defined(ARDUINO_ARCH_ESP32)
|
||||
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5,0,0)
|
||||
#include "hal/gpio_hal.h"
|
||||
#endif
|
||||
#include "driver/gpio.h"
|
||||
#endif //ARDUINO_ARCH_ESP32
|
||||
|
||||
|
||||
DISPLAY_MODEL *u8g2 = NULL;
|
||||
static DevInfo_t devInfo;
|
||||
|
||||
|
||||
#ifdef HAS_PMU
|
||||
XPowersLibInterface *PMU = NULL;
|
||||
bool pmuInterrupt;
|
||||
|
||||
static void setPmuFlag()
|
||||
{
|
||||
pmuInterrupt = true;
|
||||
}
|
||||
#endif
|
||||
|
||||
bool beginPower()
|
||||
{
|
||||
#ifdef HAS_PMU
|
||||
if (!PMU) {
|
||||
PMU = new XPowersAXP2101(PMU_WIRE_PORT);
|
||||
if (!PMU->init()) {
|
||||
Serial.println("Warning: Failed to find AXP2101 power management");
|
||||
delete PMU;
|
||||
PMU = NULL;
|
||||
} else {
|
||||
Serial.println("AXP2101 PMU init succeeded, using AXP2101 PMU");
|
||||
}
|
||||
}
|
||||
|
||||
if (!PMU) {
|
||||
PMU = new XPowersAXP192(PMU_WIRE_PORT);
|
||||
if (!PMU->init()) {
|
||||
Serial.println("Warning: Failed to find AXP192 power management");
|
||||
delete PMU;
|
||||
PMU = NULL;
|
||||
} else {
|
||||
Serial.println("AXP192 PMU init succeeded, using AXP192 PMU");
|
||||
}
|
||||
}
|
||||
|
||||
if (!PMU) {
|
||||
return false;
|
||||
}
|
||||
|
||||
PMU->setChargingLedMode(XPOWERS_CHG_LED_BLINK_1HZ);
|
||||
|
||||
pinMode(PMU_IRQ, INPUT_PULLUP);
|
||||
attachInterrupt(PMU_IRQ, setPmuFlag, FALLING);
|
||||
|
||||
if (PMU->getChipModel() == XPOWERS_AXP192) {
|
||||
|
||||
PMU->setProtectedChannel(XPOWERS_DCDC3);
|
||||
|
||||
// lora
|
||||
PMU->setPowerChannelVoltage(XPOWERS_LDO2, 3300);
|
||||
// gps
|
||||
PMU->setPowerChannelVoltage(XPOWERS_LDO3, 3300);
|
||||
// oled
|
||||
PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
|
||||
|
||||
PMU->enablePowerOutput(XPOWERS_LDO2);
|
||||
PMU->enablePowerOutput(XPOWERS_LDO3);
|
||||
|
||||
//protected oled power source
|
||||
PMU->setProtectedChannel(XPOWERS_DCDC1);
|
||||
//protected esp32 power source
|
||||
PMU->setProtectedChannel(XPOWERS_DCDC3);
|
||||
// enable oled power
|
||||
PMU->enablePowerOutput(XPOWERS_DCDC1);
|
||||
|
||||
//disable not use channel
|
||||
PMU->disablePowerOutput(XPOWERS_DCDC2);
|
||||
|
||||
PMU->disableIRQ(XPOWERS_AXP192_ALL_IRQ);
|
||||
|
||||
PMU->enableIRQ(XPOWERS_AXP192_VBUS_REMOVE_IRQ |
|
||||
XPOWERS_AXP192_VBUS_INSERT_IRQ |
|
||||
XPOWERS_AXP192_BAT_CHG_DONE_IRQ |
|
||||
XPOWERS_AXP192_BAT_CHG_START_IRQ |
|
||||
XPOWERS_AXP192_BAT_REMOVE_IRQ |
|
||||
XPOWERS_AXP192_BAT_INSERT_IRQ |
|
||||
XPOWERS_AXP192_PKEY_SHORT_IRQ
|
||||
);
|
||||
|
||||
} else if (PMU->getChipModel() == XPOWERS_AXP2101) {
|
||||
|
||||
#if defined(CONFIG_IDF_TARGET_ESP32)
|
||||
//Unuse power channel
|
||||
PMU->disablePowerOutput(XPOWERS_DCDC2);
|
||||
PMU->disablePowerOutput(XPOWERS_DCDC3);
|
||||
PMU->disablePowerOutput(XPOWERS_DCDC4);
|
||||
PMU->disablePowerOutput(XPOWERS_DCDC5);
|
||||
PMU->disablePowerOutput(XPOWERS_ALDO1);
|
||||
PMU->disablePowerOutput(XPOWERS_ALDO4);
|
||||
PMU->disablePowerOutput(XPOWERS_BLDO1);
|
||||
PMU->disablePowerOutput(XPOWERS_BLDO2);
|
||||
PMU->disablePowerOutput(XPOWERS_DLDO1);
|
||||
PMU->disablePowerOutput(XPOWERS_DLDO2);
|
||||
|
||||
// GNSS RTC PowerVDD 3300mV
|
||||
PMU->setPowerChannelVoltage(XPOWERS_VBACKUP, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_VBACKUP);
|
||||
|
||||
//ESP32 VDD 3300mV
|
||||
// ! No need to set, automatically open , Don't close it
|
||||
// PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
|
||||
// PMU->setProtectedChannel(XPOWERS_DCDC1);
|
||||
PMU->setProtectedChannel(XPOWERS_DCDC1);
|
||||
|
||||
// LoRa VDD 3300mV
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO2);
|
||||
|
||||
//GNSS VDD 3300mV
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO3);
|
||||
|
||||
#endif /*CONFIG_IDF_TARGET_ESP32*/
|
||||
|
||||
|
||||
#if defined(T_BEAM_S3_SUPREME)
|
||||
|
||||
//t-beam m.2 inface
|
||||
//gps
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO4);
|
||||
|
||||
// lora
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO3);
|
||||
|
||||
// In order to avoid bus occupation, during initialization, the SD card and QMC sensor are powered off and restarted
|
||||
if (ESP_SLEEP_WAKEUP_UNDEFINED == esp_sleep_get_wakeup_cause()) {
|
||||
Serial.println("Power off and restart ALDO BLDO..");
|
||||
PMU->disablePowerOutput(XPOWERS_ALDO1);
|
||||
PMU->disablePowerOutput(XPOWERS_ALDO2);
|
||||
PMU->disablePowerOutput(XPOWERS_BLDO1);
|
||||
delay(250);
|
||||
}
|
||||
|
||||
// Sensor
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO1);
|
||||
|
||||
PMU->setPowerChannelVoltage(XPOWERS_ALDO2, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_ALDO2);
|
||||
|
||||
//Sdcard
|
||||
|
||||
PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_BLDO1);
|
||||
|
||||
PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_BLDO2);
|
||||
|
||||
//face m.2
|
||||
PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_DCDC3);
|
||||
|
||||
PMU->setPowerChannelVoltage(XPOWERS_DCDC4, XPOWERS_AXP2101_DCDC4_VOL2_MAX);
|
||||
PMU->enablePowerOutput(XPOWERS_DCDC4);
|
||||
|
||||
PMU->setPowerChannelVoltage(XPOWERS_DCDC5, 3300);
|
||||
PMU->enablePowerOutput(XPOWERS_DCDC5);
|
||||
|
||||
|
||||
//not use channel
|
||||
PMU->disablePowerOutput(XPOWERS_DCDC2);
|
||||
// PMU->disablePowerOutput(XPOWERS_DCDC4);
|
||||
// PMU->disablePowerOutput(XPOWERS_DCDC5);
|
||||
PMU->disablePowerOutput(XPOWERS_DLDO1);
|
||||
PMU->disablePowerOutput(XPOWERS_DLDO2);
|
||||
PMU->disablePowerOutput(XPOWERS_VBACKUP);
|
||||
|
||||
// Set constant current charge current limit
|
||||
PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
|
||||
|
||||
// Set charge cut-off voltage
|
||||
PMU->setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V2);
|
||||
|
||||
// Disable all interrupts
|
||||
PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
|
||||
// Clear all interrupt flags
|
||||
PMU->clearIrqStatus();
|
||||
// Enable the required interrupt function
|
||||
PMU->enableIRQ(
|
||||
XPOWERS_AXP2101_BAT_INSERT_IRQ | XPOWERS_AXP2101_BAT_REMOVE_IRQ | //BATTERY
|
||||
XPOWERS_AXP2101_VBUS_INSERT_IRQ | XPOWERS_AXP2101_VBUS_REMOVE_IRQ | //VBUS
|
||||
XPOWERS_AXP2101_PKEY_SHORT_IRQ | XPOWERS_AXP2101_PKEY_LONG_IRQ | //POWER KEY
|
||||
XPOWERS_AXP2101_BAT_CHG_DONE_IRQ | XPOWERS_AXP2101_BAT_CHG_START_IRQ //CHARGE
|
||||
// XPOWERS_AXP2101_PKEY_NEGATIVE_IRQ | XPOWERS_AXP2101_PKEY_POSITIVE_IRQ | //POWER KEY
|
||||
);
|
||||
|
||||
#endif
|
||||
}
|
||||
|
||||
PMU->enableSystemVoltageMeasure();
|
||||
PMU->enableVbusVoltageMeasure();
|
||||
PMU->enableBattVoltageMeasure();
|
||||
|
||||
Serial.printf("=========================================\n");
|
||||
if (PMU->isChannelAvailable(XPOWERS_DCDC1)) {
|
||||
Serial.printf("DC1 : %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_DCDC2)) {
|
||||
Serial.printf("DC2 : %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_DCDC3)) {
|
||||
Serial.printf("DC3 : %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_DCDC4)) {
|
||||
Serial.printf("DC4 : %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_DCDC5)) {
|
||||
Serial.printf("DC5 : %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC5) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC5));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_LDO2)) {
|
||||
Serial.printf("LDO2 : %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_LDO2));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_LDO3)) {
|
||||
Serial.printf("LDO3 : %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_LDO3));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_ALDO1)) {
|
||||
Serial.printf("ALDO1: %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_ALDO2)) {
|
||||
Serial.printf("ALDO2: %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_ALDO3)) {
|
||||
Serial.printf("ALDO3: %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_ALDO4)) {
|
||||
Serial.printf("ALDO4: %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_BLDO1)) {
|
||||
Serial.printf("BLDO1: %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
|
||||
}
|
||||
if (PMU->isChannelAvailable(XPOWERS_BLDO2)) {
|
||||
Serial.printf("BLDO2: %s Voltage: %04u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
|
||||
}
|
||||
Serial.printf("=========================================\n");
|
||||
|
||||
|
||||
// Set the time of pressing the button to turn off
|
||||
PMU->setPowerKeyPressOffTime(XPOWERS_POWEROFF_4S);
|
||||
uint8_t opt = PMU->getPowerKeyPressOffTime();
|
||||
Serial.print("PowerKeyPressOffTime:");
|
||||
switch (opt) {
|
||||
case XPOWERS_POWEROFF_4S: Serial.println("4 Second");
|
||||
break;
|
||||
case XPOWERS_POWEROFF_6S: Serial.println("6 Second");
|
||||
break;
|
||||
case XPOWERS_POWEROFF_8S: Serial.println("8 Second");
|
||||
break;
|
||||
case XPOWERS_POWEROFF_10S: Serial.println("10 Second");
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
return true;
|
||||
}
|
||||
|
||||
void disablePeripherals()
|
||||
{
|
||||
|
||||
|
||||
}
|
||||
|
||||
bool beginDisplay()
|
||||
{
|
||||
Wire.beginTransmission(DISPLAY_ADDR);
|
||||
if (Wire.endTransmission() == 0) {
|
||||
Serial.printf("Find Display model at 0x%X address\n", DISPLAY_ADDR);
|
||||
u8g2 = new DISPLAY_MODEL(U8G2_R0, U8X8_PIN_NONE);
|
||||
u8g2->begin();
|
||||
u8g2->clearBuffer();
|
||||
u8g2->setFont(u8g2_font_inb19_mr);
|
||||
u8g2->drawStr(0, 30, "LilyGo");
|
||||
u8g2->drawHLine(2, 35, 47);
|
||||
u8g2->drawHLine(3, 36, 47);
|
||||
u8g2->drawVLine(45, 32, 12);
|
||||
u8g2->drawVLine(46, 33, 12);
|
||||
u8g2->setFont(u8g2_font_inb19_mf);
|
||||
u8g2->drawStr(58, 60, "LoRa");
|
||||
u8g2->sendBuffer();
|
||||
u8g2->setFont(u8g2_font_fur11_tf);
|
||||
delay(3000);
|
||||
return true;
|
||||
}
|
||||
|
||||
Serial.printf("Warning: Failed to find Display at 0x%0X address\n", DISPLAY_ADDR);
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
bool beginSDCard()
|
||||
{
|
||||
#ifdef SDCARD_CS
|
||||
if (SD.begin(SDCARD_CS, SDCardSPI)) {
|
||||
uint32_t cardSize = SD.cardSize() / (1024 * 1024);
|
||||
Serial.print("Sd Card init succeeded, The current available capacity is ");
|
||||
Serial.print(cardSize / 1024.0);
|
||||
Serial.println(" GB");
|
||||
return true;
|
||||
} else {
|
||||
Serial.println("Warning: Failed to init Sd Card");
|
||||
}
|
||||
#endif
|
||||
return false;
|
||||
}
|
||||
|
||||
void beginWiFi()
|
||||
{
|
||||
|
||||
|
||||
}
|
||||
|
||||
|
||||
void printWakeupReason()
|
||||
{
|
||||
#ifdef ESP32
|
||||
Serial.print("Reset reason:");
|
||||
esp_sleep_wakeup_cause_t wakeup_reason;
|
||||
wakeup_reason = esp_sleep_get_wakeup_cause();
|
||||
switch (wakeup_reason) {
|
||||
case ESP_SLEEP_WAKEUP_UNDEFINED:
|
||||
Serial.println(" In case of deep sleep, reset was not caused by exit from deep sleep");
|
||||
break;
|
||||
case ESP_SLEEP_WAKEUP_ALL :
|
||||
break;
|
||||
case ESP_SLEEP_WAKEUP_EXT0 :
|
||||
Serial.println("Wakeup caused by external signal using RTC_IO");
|
||||
break;
|
||||
case ESP_SLEEP_WAKEUP_EXT1 :
|
||||
Serial.println("Wakeup caused by external signal using RTC_CNTL");
|
||||
break;
|
||||
case ESP_SLEEP_WAKEUP_TIMER :
|
||||
Serial.println("Wakeup caused by timer");
|
||||
break;
|
||||
case ESP_SLEEP_WAKEUP_TOUCHPAD :
|
||||
Serial.println("Wakeup caused by touchpad");
|
||||
break;
|
||||
case ESP_SLEEP_WAKEUP_ULP :
|
||||
Serial.println("Wakeup caused by ULP program");
|
||||
break;
|
||||
default :
|
||||
Serial.printf("Wakeup was not caused by deep sleep: %d\n", wakeup_reason);
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
void getChipInfo()
|
||||
{
|
||||
#if defined(ARDUINO_ARCH_ESP32)
|
||||
|
||||
Serial.println("-----------------------------------");
|
||||
|
||||
printWakeupReason();
|
||||
|
||||
#if defined(CONFIG_IDF_TARGET_ESP32) || defined(CONFIG_IDF_TARGET_ESP32S3)
|
||||
|
||||
if (psramFound()) {
|
||||
uint32_t psram = ESP.getPsramSize();
|
||||
devInfo.psramSize = psram / 1024.0 / 1024.0;
|
||||
Serial.printf("PSRAM is enable! PSRAM: %.2fMB\n", devInfo.psramSize);
|
||||
} else {
|
||||
Serial.println("PSRAM is disable!");
|
||||
devInfo.psramSize = 0;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
Serial.print("Flash:");
|
||||
devInfo.flashSize = ESP.getFlashChipSize() / 1024.0 / 1024.0;
|
||||
devInfo.flashSpeed = ESP.getFlashChipSpeed() / 1000 / 1000;
|
||||
devInfo.chipModel = ESP.getChipModel();
|
||||
devInfo.chipModelRev = ESP.getChipRevision();
|
||||
devInfo.chipFreq = ESP.getCpuFreqMHz();
|
||||
|
||||
Serial.print(devInfo.flashSize);
|
||||
Serial.println(" MB");
|
||||
Serial.print("Flash speed:");
|
||||
Serial.print(devInfo.flashSpeed);
|
||||
Serial.println(" M");
|
||||
Serial.print("Model:");
|
||||
|
||||
Serial.println(devInfo.chipModel);
|
||||
Serial.print("Chip Revision:");
|
||||
Serial.println(devInfo.chipModelRev);
|
||||
Serial.print("Freq:");
|
||||
Serial.print(devInfo.chipFreq);
|
||||
Serial.println(" MHZ");
|
||||
Serial.print("SDK Ver:");
|
||||
Serial.println(ESP.getSdkVersion());
|
||||
Serial.print("DATE:");
|
||||
Serial.println(__DATE__);
|
||||
Serial.print("TIME:");
|
||||
Serial.println(__TIME__);
|
||||
|
||||
Serial.print("EFUSE MAC: ");
|
||||
Serial.print( ESP.getEfuseMac(), HEX);
|
||||
Serial.println();
|
||||
|
||||
Serial.println("-----------------------------------");
|
||||
|
||||
#elif defined(ARDUINO_ARCH_STM32)
|
||||
uint32_t uid[3];
|
||||
|
||||
uid[0] = HAL_GetUIDw0();
|
||||
uid[1] = HAL_GetUIDw1();
|
||||
uid[2] = HAL_GetUIDw2();
|
||||
Serial.print("STM UID: 0X");
|
||||
Serial.print( uid[0], HEX);
|
||||
Serial.print( uid[1], HEX);
|
||||
Serial.print( uid[2], HEX);
|
||||
Serial.println();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
|
||||
void setupBoards()
|
||||
{
|
||||
Serial.begin(115200);
|
||||
|
||||
Serial.println("setupBoards");
|
||||
|
||||
Serial.begin(115200);
|
||||
|
||||
getChipInfo();
|
||||
|
||||
#if defined(ARDUINO_ARCH_ESP32)
|
||||
SPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN);
|
||||
#elif defined(ARDUINO_ARCH_STM32)
|
||||
SPI.setMISO(RADIO_MISO_PIN);
|
||||
SPI.setMOSI(RADIO_MOSI_PIN);
|
||||
SPI.setSCLK(RADIO_SCLK_PIN);
|
||||
SPI.begin();
|
||||
#endif
|
||||
|
||||
#ifdef HAS_SDCARD
|
||||
SDCardSPI.begin(SDCARD_SCLK, SDCARD_MISO, SDCARD_MOSI);
|
||||
#endif
|
||||
|
||||
#ifdef I2C_SDA
|
||||
Wire.begin(I2C_SDA, I2C_SCL);
|
||||
#endif
|
||||
|
||||
#ifdef I2C1_SDA
|
||||
Wire1.begin(I2C1_SDA, I2C1_SCL);
|
||||
#endif
|
||||
|
||||
#ifdef HAS_GPS
|
||||
#if defined(ARDUINO_ARCH_ESP32)
|
||||
SerialGPS.begin(GPS_BAUD_RATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);
|
||||
#elif defined(ARDUINO_ARCH_STM32)
|
||||
SerialGPS.setRx(GPS_RX_PIN);
|
||||
SerialGPS.setTx(GPS_TX_PIN);
|
||||
SerialGPS.begin(GPS_BAUD_RATE);
|
||||
#endif // ARDUINO_ARCH_
|
||||
#endif // HAS_GPS
|
||||
|
||||
#if OLED_RST
|
||||
pinMode(OLED_RST, OUTPUT);
|
||||
digitalWrite(OLED_RST, HIGH); delay(20);
|
||||
digitalWrite(OLED_RST, LOW); delay(20);
|
||||
digitalWrite(OLED_RST, HIGH); delay(20);
|
||||
#endif
|
||||
|
||||
#ifdef BOARD_LED
|
||||
/*
|
||||
* T-Beam LED defaults to low level as turn on,
|
||||
* so it needs to be forced to pull up
|
||||
* * * * */
|
||||
#if LED_ON == LOW
|
||||
#if defined(ARDUINO_ARCH_ESP32)
|
||||
gpio_hold_dis((gpio_num_t)BOARD_LED);
|
||||
#endif //ARDUINO_ARCH_ESP32
|
||||
#endif
|
||||
|
||||
pinMode(BOARD_LED, OUTPUT);
|
||||
digitalWrite(BOARD_LED, LED_ON);
|
||||
#endif
|
||||
|
||||
#ifdef GPS_EN_PIN
|
||||
pinMode(GPS_EN_PIN, OUTPUT);
|
||||
digitalWrite(GPS_EN_PIN, HIGH);
|
||||
#endif
|
||||
|
||||
#ifdef GPS_RST_PIN
|
||||
pinMode(GPS_RST_PIN, OUTPUT);
|
||||
digitalWrite(GPS_RST_PIN, HIGH);
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(ARDUINO_ARCH_STM32)
|
||||
SerialGPS.println("@GSR"); delay(300);
|
||||
SerialGPS.println("@GSR"); delay(300);
|
||||
SerialGPS.println("@GSR"); delay(300);
|
||||
SerialGPS.println("@GSR"); delay(300);
|
||||
SerialGPS.println("@GSR"); delay(300);
|
||||
#endif
|
||||
|
||||
beginPower();
|
||||
|
||||
beginSDCard();
|
||||
|
||||
beginDisplay();
|
||||
|
||||
beginWiFi();
|
||||
|
||||
Serial.println("init done . ");
|
||||
}
|
||||
|
||||
|
||||
void printResult(bool radio_online)
|
||||
{
|
||||
Serial.print("Radio : ");
|
||||
Serial.println((radio_online) ? "+" : "-");
|
||||
|
||||
#if defined(CONFIG_IDF_TARGET_ESP32) || defined(CONFIG_IDF_TARGET_ESP32S3)
|
||||
|
||||
Serial.print("PSRAM : ");
|
||||
Serial.println((psramFound()) ? "+" : "-");
|
||||
|
||||
Serial.print("Display : ");
|
||||
Serial.println(( u8g2) ? "+" : "-");
|
||||
|
||||
#ifdef HAS_SDCARD
|
||||
Serial.print("Sd Card : ");
|
||||
Serial.println((SD.cardSize() != 0) ? "+" : "-");
|
||||
#endif
|
||||
|
||||
#ifdef HAS_PMU
|
||||
Serial.print("Power : ");
|
||||
Serial.println(( PMU ) ? "+" : "-");
|
||||
#endif
|
||||
|
||||
|
||||
if (u8g2) {
|
||||
|
||||
u8g2->clearBuffer();
|
||||
u8g2->setFont(u8g2_font_NokiaLargeBold_tf );
|
||||
uint16_t str_w = u8g2->getStrWidth(BOARD_VARIANT_NAME);
|
||||
u8g2->drawStr((u8g2->getWidth() - str_w) / 2, 16, BOARD_VARIANT_NAME);
|
||||
u8g2->drawHLine(5, 21, u8g2->getWidth() - 5);
|
||||
|
||||
u8g2->drawStr( 0, 38, "Disp:"); u8g2->drawStr( 45, 38, ( u8g2) ? "+" : "-");
|
||||
|
||||
#ifdef HAS_SDCARD
|
||||
u8g2->drawStr( 0, 54, "SD :"); u8g2->drawStr( 45, 54, (SD.cardSize() != 0) ? "+" : "-");
|
||||
#endif
|
||||
|
||||
u8g2->drawStr( 62, 38, "Radio:"); u8g2->drawStr( 120, 38, ( radio_online ) ? "+" : "-");
|
||||
|
||||
#ifdef HAS_PMU
|
||||
u8g2->drawStr( 62, 54, "Power:"); u8g2->drawStr( 120, 54, ( PMU ) ? "+" : "-");
|
||||
#endif
|
||||
|
||||
u8g2->sendBuffer();
|
||||
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
|
||||
static uint8_t ledState = LOW;
|
||||
static const uint32_t debounceDelay = 50;
|
||||
static uint32_t lastDebounceTime = 0;
|
||||
|
||||
void flashLed()
|
||||
{
|
||||
#ifdef BOARD_LED
|
||||
if ((millis() - lastDebounceTime) > debounceDelay) {
|
||||
ledState = !ledState;
|
||||
if (ledState) {
|
||||
digitalWrite(BOARD_LED, LED_ON);
|
||||
} else {
|
||||
digitalWrite(BOARD_LED, !LED_ON);
|
||||
}
|
||||
lastDebounceTime = millis();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
Loading…
Add table
Add a link
Reference in a new issue