Raname libdeps to lib

lib/AceButton/examples/ClickVersusDoubleClickUsingBoth/ClickVersusDoubleClickUsingBoth.ino

@@ -0,0 +1,72 @@
+/*
+ * A demo that combines the techniques of ClickVersusDoubleClickUsingReleased
+ * and ClickVersusDoubleClickUsingSuppression by using both event types to
+ * trigger a "Clicked". I think this is the best of both worlds. If someone does
+ * a simple Press/Release, the Release gets triggered. If someone does a quick
+ * click, then a Click gets triggers (after a delay to wait for the potential
+ * DoubleClick).
+ *
+ * See Also:
+ *    examples/ClickVersusDoubleClickUsingReleased/
+ *    examples/ClickVersusDoubleClickUsingSuppression/
+ */
+
+#include <AceButton.h>
+using namespace ace_button;
+
+// The pin number attached to the button.
+const int BUTTON_PIN = 2;
+
+#ifdef ESP32
+  // Different ESP32 boards use different pins
+  const int LED_PIN = 2;
+#else
+  const int LED_PIN = LED_BUILTIN;
+#endif
+
+// LED states. Some microcontrollers wire their built-in LED the reverse.
+const int LED_ON = HIGH;
+const int LED_OFF = LOW;
+
+// One button wired to the pin at BUTTON_PIN. Automatically uses the default
+// ButtonConfig. The alternative is to call the AceButton::init() method in
+// setup() below.
+AceButton button(BUTTON_PIN);
+
+void handleEvent(AceButton*, uint8_t, uint8_t);
+
+void setup() {
+  // initialize built-in LED as an output
+  pinMode(LED_PIN, OUTPUT);
+
+  // Button uses the built-in pull up register.
+  pinMode(BUTTON_PIN, INPUT_PULLUP);
+
+  ButtonConfig* buttonConfig = button.getButtonConfig();
+  buttonConfig->setEventHandler(handleEvent);
+  buttonConfig->setFeature(ButtonConfig::kFeatureDoubleClick);
+  buttonConfig->setFeature(
+      ButtonConfig::kFeatureSuppressClickBeforeDoubleClick);
+  buttonConfig->setFeature(ButtonConfig::kFeatureSuppressAfterClick);
+  buttonConfig->setFeature(ButtonConfig::kFeatureSuppressAfterDoubleClick);
+}
+
+void loop() {
+  // Should be called every 20ms or faster for the default debouncing time
+  // of ~50ms.
+  button.check();
+}
+
+// The event handler for the button.
+void handleEvent(AceButton* /* button */, uint8_t eventType,
+    uint8_t /* buttonState */) {
+  switch (eventType) {
+    case AceButton::kEventClicked:
+    case AceButton::kEventReleased:
+      digitalWrite(LED_PIN, LED_ON);
+      break;
+    case AceButton::kEventDoubleClicked:
+      digitalWrite(LED_PIN, LED_OFF);
+      break;
+  }
+}