Added I2C Scanner example
This commit is contained in:
lewisxhe
parent
56c6ec6fbb
commit
b06aebd026
5 changed files with 2299 additions and 0 deletions
BIN
docs/en/t_beam_supreme/images/BME.png
Normal file
BIN
docs/en/t_beam_supreme/images/BME.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 1.6 MiB |
62
examples/Sensor/I2CScanner/I2CScanner.ino
Normal file
62
examples/Sensor/I2CScanner/I2CScanner.ino
Normal file
|
|
@ -0,0 +1,62 @@
|
|||
/**
|
||||
* @file I2CScanner.ino
|
||||
* @author Lewis He (lewishe@outlook.com)
|
||||
* @license MIT
|
||||
* @copyright Copyright (c) 2025 ShenZhen XinYuan Electronic Technology Co., Ltd
|
||||
* @date 2025-12-04
|
||||
* @note T_BEAM_S3_SUPREME If the I2C device is connected to pins 17 (SDA) or 18 (SCL),
|
||||
* the sensor power supply must be connected to DC1. If connected to other LDOs,
|
||||
* the power must be turned on before accessing the sensor I2C bus; otherwise, the I2C access will fail or freeze.
|
||||
*/
|
||||
|
||||
#include <Arduino.h>
|
||||
#include "LoRaBoards.h"
|
||||
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(115200);
|
||||
while (!Serial);
|
||||
|
||||
Serial.println("\nI2C Scanner Starting...");
|
||||
|
||||
// Wire.begin(17, 18); // SDA, SCL
|
||||
setupBoards();
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
byte error, address;
|
||||
int nDevices;
|
||||
|
||||
Serial.println("Scanning...");
|
||||
|
||||
nDevices = 0;
|
||||
for (address = 1; address < 127; address++ ) {
|
||||
// The i2c_scanner uses the return value of
|
||||
// the Wire.beginTransmission to see if
|
||||
// a device did acknowledge to the address.
|
||||
Wire.beginTransmission(address);
|
||||
error = Wire.endTransmission();
|
||||
if (error == 0) {
|
||||
Serial.print("I2C device found at address 0x");
|
||||
if (address < 16)
|
||||
Serial.print("0");
|
||||
Serial.print(address, HEX);
|
||||
Serial.println(" !");
|
||||
|
||||
nDevices++;
|
||||
} else if (error == 4) {
|
||||
Serial.print("Unknown error at address 0x");
|
||||
if (address < 16)
|
||||
Serial.print("0");
|
||||
Serial.println(address, HEX);
|
||||
}
|
||||
}
|
||||
if (nDevices == 0)
|
||||
Serial.println("No I2C devices found\n");
|
||||
else
|
||||
Serial.println("done\n");
|
||||
|
||||
delay(5000); // wait 5 seconds for next scan
|
||||
}
|
||||
1329
examples/Sensor/I2CScanner/LoRaBoards.cpp
Normal file
1329
examples/Sensor/I2CScanner/LoRaBoards.cpp
Normal file
File diff suppressed because it is too large
Load diff
143
examples/Sensor/I2CScanner/LoRaBoards.h
Normal file
143
examples/Sensor/I2CScanner/LoRaBoards.h
Normal file
|
|
@ -0,0 +1,143 @@
|
|||
/**
|
||||
* @file boards.h
|
||||
* @author Lewis He (lewishe@outlook.com)
|
||||
* @license MIT
|
||||
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
|
||||
* @date 2024-04-25
|
||||
* @last-update 2024-08-07
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
|
||||
#include "utilities.h"
|
||||
|
||||
#ifdef HAS_SDCARD
|
||||
#include <SD.h>
|
||||
#endif
|
||||
|
||||
#if defined(ARDUINO_ARCH_ESP32)
|
||||
#include <FS.h>
|
||||
#include <WiFi.h>
|
||||
#endif
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <SPI.h>
|
||||
#include <Wire.h>
|
||||
|
||||
#ifdef DISPLAY_MODEL
|
||||
#include <U8g2lib.h>
|
||||
#endif
|
||||
|
||||
#ifdef HAS_PMU
|
||||
#include <XPowersLib.h>
|
||||
#endif
|
||||
|
||||
#include <esp_mac.h>
|
||||
|
||||
|
||||
#ifndef DISPLAY_ADDR
|
||||
#define DISPLAY_ADDR 0x3C
|
||||
#endif
|
||||
|
||||
|
||||
// #define ENABLE_BLE //Enable ble function
|
||||
|
||||
enum {
|
||||
POWERMANAGE_ONLINE = _BV(0),
|
||||
DISPLAY_ONLINE = _BV(1),
|
||||
RADIO_ONLINE = _BV(2),
|
||||
GPS_ONLINE = _BV(3),
|
||||
PSRAM_ONLINE = _BV(4),
|
||||
SDCARD_ONLINE = _BV(5),
|
||||
AXDL345_ONLINE = _BV(6),
|
||||
BME280_ONLINE = _BV(7),
|
||||
BMP280_ONLINE = _BV(8),
|
||||
BME680_ONLINE = _BV(9),
|
||||
QMC6310_ONLINE = _BV(10),
|
||||
QMI8658_ONLINE = _BV(11),
|
||||
PCF8563_ONLINE = _BV(12),
|
||||
OSC32768_ONLINE = _BV(13),
|
||||
};
|
||||
|
||||
|
||||
|
||||
typedef struct {
|
||||
String chipModel;
|
||||
float psramSize;
|
||||
uint8_t chipModelRev;
|
||||
uint8_t chipFreq;
|
||||
uint8_t flashSize;
|
||||
uint8_t flashSpeed;
|
||||
} DevInfo_t;
|
||||
|
||||
|
||||
void setupBoards(bool disable_u8g2 = false);
|
||||
|
||||
#ifdef HAS_SDCARD
|
||||
bool beginSDCard();
|
||||
#else
|
||||
#define beginSDCard()
|
||||
#endif
|
||||
|
||||
#ifdef DISPLAY_MODEL
|
||||
bool beginDisplay();
|
||||
#endif
|
||||
|
||||
|
||||
void printResult(bool radio_online);
|
||||
|
||||
#ifdef BOARD_LED
|
||||
void flashLed();
|
||||
#else
|
||||
#define flashLed()
|
||||
#endif
|
||||
|
||||
void scanDevices(TwoWire *w);
|
||||
|
||||
bool beginGPS();
|
||||
|
||||
bool recoveryGPS();
|
||||
|
||||
void scanWiFi();
|
||||
|
||||
#ifdef HAS_PMU
|
||||
extern XPowersLibInterface *PMU;
|
||||
extern bool pmuInterrupt;
|
||||
void loopPMU(void (*pressed_cb)(void));
|
||||
bool beginPower();
|
||||
void disablePeripherals();
|
||||
#else
|
||||
#define beginPower()
|
||||
#define disablePeripherals()
|
||||
#endif
|
||||
|
||||
#ifdef DISPLAY_MODEL
|
||||
extern DISPLAY_MODEL *u8g2;
|
||||
#define U8G2_HOR_ALIGN_CENTER(t) ((u8g2->getDisplayWidth() - (u8g2->getUTF8Width(t))) / 2)
|
||||
#define U8G2_HOR_ALIGN_RIGHT(t) ( u8g2->getDisplayWidth() - u8g2->getUTF8Width(t))
|
||||
#endif
|
||||
|
||||
|
||||
#if defined(ARDUINO_ARCH_ESP32)
|
||||
|
||||
#if defined(HAS_SDCARD)
|
||||
extern SPIClass SDCardSPI;
|
||||
#endif
|
||||
|
||||
#define SerialGPS Serial1
|
||||
#elif defined(ARDUINO_ARCH_STM32)
|
||||
extern HardwareSerial SerialGPS;
|
||||
#endif
|
||||
|
||||
#ifdef NTC_PIN
|
||||
float getTempForNTC();
|
||||
#endif
|
||||
|
||||
#ifdef ENABLE_BLE
|
||||
void setupBLE();
|
||||
#else
|
||||
#define setupBLE()
|
||||
#endif
|
||||
|
||||
extern uint32_t deviceOnline;
|
||||
765
examples/Sensor/I2CScanner/utilities.h
Normal file
765
examples/Sensor/I2CScanner/utilities.h
Normal file
|
|
@ -0,0 +1,765 @@
|
|||
/**
|
||||
* @file utilities.h
|
||||
* @author Lewis He (lewishe@outlook.com)
|
||||
* @license MIT
|
||||
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
|
||||
* @date 2024-05-12
|
||||
* @last-update 2025-07-07
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
|
||||
// Support board list , Macro definition below, select the board definition to be used
|
||||
// 将要使用的板子型号注释打开,只能打开一个型号,如果不明白自己买的型号是什么,请找客服核对型号
|
||||
|
||||
/*********************************** Model definition start 型号定义起始 ***********************************/
|
||||
|
||||
// 1. --------------T3 V1.3 -------------------------------
|
||||
// https://lilygo.cc/products/lora-v1-3
|
||||
// #define T3_V1_3_SX1276
|
||||
// #define T3_V1_3_SX1278
|
||||
|
||||
// 2. --------------T3 V1.6.1 -------------------------------
|
||||
// https://lilygo.cc/products/lora3
|
||||
|
||||
// #define T3_V1_6_SX1276
|
||||
// #define T3_V1_6_SX1278
|
||||
|
||||
// 3. --------------T3 V3.0 TCXO-------------------------------
|
||||
// Product: https://lilygo.cc/products/t3-tcxo
|
||||
|
||||
// #define T3_V3_0_SX1276_TCXO
|
||||
|
||||
// 4. --------------T-BEAM ESP32-------------------------------
|
||||
// Product: https://lilygo.cc/products/t-beam
|
||||
|
||||
// #define T_BEAM_SX1262
|
||||
// #define T_BEAM_SX1276
|
||||
// #define T_BEAM_SX1278
|
||||
// #define T_BEAM_LR1121
|
||||
|
||||
// 5. --------------T-BEAM S3------------------------------
|
||||
// Product: https://lilygo.cc/products/t-beam-supreme
|
||||
|
||||
// #define T_BEAM_S3_SUPREME_SX1262
|
||||
// #define T_BEAM_S3_SUPREME_LR1121
|
||||
|
||||
// 6. --------------T3 S3 V1.0 or T3 S3 V1.3 -------------------
|
||||
// Product: https://lilygo.cc/products/t3s3-v1-0 , same v1.3
|
||||
// Product: https://lilygo.cc/products/t3-s3-v1-3
|
||||
|
||||
// #define T3_S3_V1_2_SX1262
|
||||
// #define T3_S3_V1_2_SX1276
|
||||
// #define T3_S3_V1_2_SX1278
|
||||
// #define T3_S3_V1_2_SX1280
|
||||
// #define T3_S3_V1_2_SX1280_PA
|
||||
// #define T3_S3_V1_2_LR1121
|
||||
|
||||
// 7. --------------T-Motion -------------------------------------
|
||||
// Product: https://lilygo.cc/products/t-motion-s76g-stm32-lora
|
||||
|
||||
// #define T_MOTION
|
||||
|
||||
// --------------T3 C6 -------------------------------------
|
||||
// Product: https://lilygo.cc/products/t-lora-c6
|
||||
|
||||
// #define T3_C6
|
||||
|
||||
|
||||
// --------------T-Beam BPF -------------------------------------
|
||||
// Product: https://lilygo.cc/products/t-beam-bpf
|
||||
// #define T_BEAM_S3_BPF
|
||||
|
||||
// --------------LoRa 2W -------------------------------------
|
||||
// Product: ...
|
||||
// #define T_BEAM_1W
|
||||
|
||||
|
||||
|
||||
// #define T3_V1_6_SX1276_TCXO // Production has stopped
|
||||
|
||||
/*********************************** Model definition end 型号定义结尾 ***********************************/
|
||||
|
||||
|
||||
#define UNUSED_PIN (0)
|
||||
|
||||
#if defined(T_BEAM_SX1262) || defined(T_BEAM_SX1276) || defined(T_BEAM_SX1278) || defined(T_BEAM_LR1121)
|
||||
|
||||
|
||||
#if defined(T_BEAM_SX1262)
|
||||
#ifndef USING_SX1262
|
||||
#define USING_SX1262
|
||||
#endif
|
||||
#elif defined(T_BEAM_SX1276)
|
||||
#ifndef USING_SX1276
|
||||
#define USING_SX1276
|
||||
#endif
|
||||
#elif defined(T_BEAM_SX1278)
|
||||
#ifndef USING_SX1278
|
||||
#define USING_SX1278
|
||||
#endif
|
||||
#elif defined(T_BEAM_LR1121)
|
||||
#ifndef USING_LR1121
|
||||
#define USING_LR1121
|
||||
#endif
|
||||
#endif // T_BEAM_SX1262
|
||||
|
||||
|
||||
#define GPS_RX_PIN 34
|
||||
#define GPS_TX_PIN 12
|
||||
#define BUTTON_PIN 38
|
||||
#define BUTTON_PIN_MASK GPIO_SEL_38
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define PMU_IRQ 35
|
||||
|
||||
#define RADIO_SCLK_PIN 5
|
||||
#define RADIO_MISO_PIN 19
|
||||
#define RADIO_MOSI_PIN 27
|
||||
#define RADIO_CS_PIN 18
|
||||
#define RADIO_DIO0_PIN 26
|
||||
#define RADIO_RST_PIN 23
|
||||
#define RADIO_DIO1_PIN 33
|
||||
// SX1276/78
|
||||
#define RADIO_DIO2_PIN 32
|
||||
// SX1262
|
||||
#define RADIO_BUSY_PIN 32
|
||||
|
||||
// LR1121 Only
|
||||
#define RADIO_DIO9_PIN 33
|
||||
|
||||
|
||||
#define BOARD_LED 4
|
||||
#define LED_ON LOW
|
||||
#define LED_OFF HIGH
|
||||
|
||||
#define BUTTON_PIN 38
|
||||
|
||||
#define GPS_BAUD_RATE 9600
|
||||
#define HAS_GPS
|
||||
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
|
||||
#define HAS_PMU
|
||||
|
||||
#define PMU_WIRE_PORT Wire
|
||||
#define BOARD_VARIANT_NAME "T-Beam"
|
||||
#define DISPLAY_MODEL_SSD_LIB SSD1306Wire
|
||||
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
|
||||
|
||||
#elif defined(T3_V1_3_SX1276) || defined(T3_V1_3_SX1278)
|
||||
|
||||
|
||||
#if defined(T3_V1_3_SX1276)
|
||||
|
||||
#ifndef USING_SX1276
|
||||
#define USING_SX1276
|
||||
#endif
|
||||
|
||||
#elif defined(T3_V1_3_SX1278)
|
||||
|
||||
#ifndef USING_SX1278
|
||||
#define USING_SX1278
|
||||
#endif
|
||||
|
||||
#endif // T3_V1_3_SX1276
|
||||
|
||||
|
||||
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define OLED_RST UNUSED_PIN
|
||||
|
||||
#define RADIO_SCLK_PIN 5
|
||||
#define RADIO_MISO_PIN 19
|
||||
#define RADIO_MOSI_PIN 27
|
||||
#define RADIO_CS_PIN 18
|
||||
#define RADIO_DIO0_PIN 26
|
||||
#define RADIO_RST_PIN 14
|
||||
#define RADIO_DIO1_PIN 33
|
||||
|
||||
// SX1276/78
|
||||
#define RADIO_DIO2_PIN 32
|
||||
// SX1262
|
||||
#define RADIO_BUSY_PIN 32
|
||||
|
||||
|
||||
#define ADC_PIN 35
|
||||
#define HAS_DISPLAY
|
||||
#define BOARD_VARIANT_NAME "T3 V1.3"
|
||||
|
||||
#define DISPLAY_MODEL_SSD_LIB SSD1306Wire
|
||||
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
|
||||
|
||||
#define BAT_ADC_PULLUP_RES (100000.0)
|
||||
#define BAT_ADC_PULLDOWN_RES (100000.0)
|
||||
#define BAT_MAX_VOLTAGE (4.2)
|
||||
#define BAT_VOL_COMPENSATION (0.0)
|
||||
|
||||
#elif defined(T3_V1_6_SX1276) || defined(T3_V1_6_SX1278)
|
||||
|
||||
|
||||
#if defined(T3_V1_6_SX1276)
|
||||
#ifndef USING_SX1276
|
||||
#define USING_SX1276
|
||||
#endif
|
||||
#elif defined(T3_V1_6_SX1278)
|
||||
#ifndef USING_SX1278
|
||||
#define USING_SX1278
|
||||
#endif
|
||||
#endif // T3_V1_6_SX1276
|
||||
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define OLED_RST UNUSED_PIN
|
||||
|
||||
#define RADIO_SCLK_PIN 5
|
||||
#define RADIO_MISO_PIN 19
|
||||
#define RADIO_MOSI_PIN 27
|
||||
#define RADIO_CS_PIN 18
|
||||
#define RADIO_DIO0_PIN 26
|
||||
#define RADIO_RST_PIN 23
|
||||
#define RADIO_DIO1_PIN 33
|
||||
// SX1276/78
|
||||
#define RADIO_DIO2_PIN 32
|
||||
// SX1262
|
||||
#define RADIO_BUSY_PIN 32
|
||||
|
||||
#define SDCARD_MOSI 15
|
||||
#define SDCARD_MISO 2
|
||||
#define SDCARD_SCLK 14
|
||||
#define SDCARD_CS 13
|
||||
|
||||
#define BOARD_LED 25
|
||||
#define LED_ON HIGH
|
||||
|
||||
#define ADC_PIN 35
|
||||
|
||||
#define HAS_SDCARD
|
||||
#define HAS_DISPLAY
|
||||
|
||||
#define BOARD_VARIANT_NAME "T3 V1.6"
|
||||
#define DISPLAY_MODEL_SSD_LIB SSD1306Wire
|
||||
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
|
||||
#define BAT_ADC_PULLUP_RES (100000.0)
|
||||
#define BAT_ADC_PULLDOWN_RES (100000.0)
|
||||
#define BAT_MAX_VOLTAGE (4.2)
|
||||
#define BAT_VOL_COMPENSATION (0.0)
|
||||
|
||||
#elif defined(T3_V1_6_SX1276_TCXO)
|
||||
|
||||
#ifndef USING_SX1276
|
||||
#define USING_SX1276
|
||||
#endif
|
||||
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define OLED_RST UNUSED_PIN
|
||||
|
||||
#define RADIO_SCLK_PIN 5
|
||||
#define RADIO_MISO_PIN 19
|
||||
#define RADIO_MOSI_PIN 27
|
||||
#define RADIO_CS_PIN 18
|
||||
#define RADIO_DIO0_PIN 26
|
||||
#define RADIO_RST_PIN 23
|
||||
#define RADIO_DIO1_PIN -1//33
|
||||
/*
|
||||
* In the T3 V1.6.1 TCXO version, Radio DIO1 is connected to Radio’s
|
||||
* internal temperature-compensated crystal oscillator enable
|
||||
* */
|
||||
// TCXO pin must be set to HIGH before enabling Radio
|
||||
#define RADIO_TCXO_ENABLE 33
|
||||
#define RADIO_BUSY_PIN 32
|
||||
|
||||
#define SDCARD_MOSI 15
|
||||
#define SDCARD_MISO 2
|
||||
#define SDCARD_SCLK 14
|
||||
#define SDCARD_CS 13
|
||||
|
||||
#define BOARD_LED 25
|
||||
#define LED_ON HIGH
|
||||
|
||||
#define ADC_PIN 35
|
||||
|
||||
#define HAS_SDCARD
|
||||
#define HAS_DISPLAY
|
||||
|
||||
#define BOARD_VARIANT_NAME "T3 V1.6 TCXO"
|
||||
#define DISPLAY_MODEL_SSD_LIB SSD1306Wire
|
||||
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
|
||||
#define BAT_ADC_PULLUP_RES (100000.0)
|
||||
#define BAT_ADC_PULLDOWN_RES (100000.0)
|
||||
#define BAT_MAX_VOLTAGE (4.2)
|
||||
#define BAT_VOL_COMPENSATION (0.0)
|
||||
|
||||
#elif defined(T3_V3_0) || defined(T3_V3_0_SX1276_TCXO)
|
||||
|
||||
#ifdef T3_V3_0_SX1276_TCXO
|
||||
#ifndef USING_SX1276
|
||||
#define USING_SX1276
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define OLED_RST 4
|
||||
|
||||
#define RADIO_SCLK_PIN 5
|
||||
#define RADIO_MISO_PIN 19
|
||||
#define RADIO_MOSI_PIN 27
|
||||
#define RADIO_CS_PIN 18
|
||||
#define RADIO_RST_PIN 23
|
||||
|
||||
// TCXO pin must be set to HIGH before enabling Radio
|
||||
#define RADIO_TCXO_ENABLE 12 //only sx1276 tcxo version
|
||||
#define RADIO_BUSY_PIN 32
|
||||
|
||||
|
||||
#if defined(USING_SX1262)
|
||||
|
||||
#define RADIO_DIO1_PIN 26
|
||||
#define RADIO_BUSY_PIN 32
|
||||
|
||||
#elif defined(USING_SX1276) || defined(USING_SX1278)
|
||||
//!SX1276/78 module only
|
||||
|
||||
#define RADIO_DIO0_PIN 26
|
||||
#define RADIO_DIO1_PIN 32
|
||||
|
||||
#elif defined(USING_LR1121)
|
||||
|
||||
#define RADIO_DIO9_PIN 26 //LR1121 DIO9
|
||||
#define RADIO_BUSY_PIN 32 //LR1121 BUSY
|
||||
|
||||
#endif
|
||||
|
||||
#define SDCARD_MOSI 15
|
||||
#define SDCARD_MISO 2
|
||||
#define SDCARD_SCLK 14
|
||||
#define SDCARD_CS 13
|
||||
|
||||
#define BOARD_LED 25
|
||||
#define LED_ON HIGH
|
||||
|
||||
#define HAS_SDCARD
|
||||
#define HAS_DISPLAY
|
||||
|
||||
#define BOARD_VARIANT_NAME "T3 V3.0"
|
||||
#define DISPLAY_MODEL_SSD_LIB SSD1306Wire
|
||||
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
|
||||
#define BUTTON_PIN 0
|
||||
#define ADC_PIN 35
|
||||
|
||||
#define BAT_ADC_PULLUP_RES (100000.0)
|
||||
#define BAT_ADC_PULLDOWN_RES (100000.0)
|
||||
#define BAT_MAX_VOLTAGE (4.2)
|
||||
#define BAT_VOL_COMPENSATION (0.0)
|
||||
|
||||
#elif defined(T3_S3_V1_2_SX1262) || defined(ARDUINO_LILYGO_T3S3_SX1262) || \
|
||||
defined(T3_S3_V1_2_SX1276) || defined(ARDUINO_LILYGO_T3S3_SX1276) || \
|
||||
defined(T3_S3_V1_2_SX1278) || defined(ARDUINO_LILYGO_T3S3_SX1278) || \
|
||||
defined(T3_S3_V1_2_SX1280) || defined(ARDUINO_LILYGO_T3S3_SX1280) || \
|
||||
defined(T3_S3_V1_2_SX1280_PA) || defined(ARDUINO_LILYGO_T3S3_SX1280PA) || \
|
||||
defined(T3_S3_V1_2_LR1121) || defined(ARDUINO_LILYGO_T3S3_LR1121)
|
||||
|
||||
|
||||
#if defined(T3_S3_V1_2_SX1262) || defined(ARDUINO_LILYGO_T3S3_SX1262)
|
||||
#ifndef USING_SX1262
|
||||
#define USING_SX1262
|
||||
#endif
|
||||
#elif defined(T3_S3_V1_2_SX1276) || defined(ARDUINO_LILYGO_T3S3_SX1276)
|
||||
#ifndef USING_SX1276
|
||||
#define USING_SX1276
|
||||
#endif
|
||||
#elif defined(T3_S3_V1_2_SX1278) || defined(ARDUINO_LILYGO_T3S3_SX1278)
|
||||
#ifndef USING_SX1278
|
||||
#define USING_SX1278
|
||||
#endif
|
||||
#elif defined(T3_S3_V1_2_SX1280) || defined(ARDUINO_LILYGO_T3S3_SX1280)
|
||||
#ifndef USING_SX1280
|
||||
#define USING_SX1280
|
||||
#endif
|
||||
#elif defined(T3_S3_V1_2_SX1280_PA) || defined(ARDUINO_LILYGO_T3S3_SX1280PA)
|
||||
#ifndef USING_SX1280PA
|
||||
#define USING_SX1280PA
|
||||
#endif
|
||||
#elif defined(T3_S3_V1_2_LR1121) || defined(ARDUINO_LILYGO_T3S3_LR1121)
|
||||
#ifndef USING_LR1121
|
||||
#define USING_LR1121
|
||||
#endif
|
||||
|
||||
#endif // T3_S3_V1_2_SX1262
|
||||
|
||||
|
||||
#define I2C_SDA 18
|
||||
#define I2C_SCL 17
|
||||
#define OLED_RST UNUSED_PIN
|
||||
|
||||
#define RADIO_SCLK_PIN 5
|
||||
#define RADIO_MISO_PIN 3
|
||||
#define RADIO_MOSI_PIN 6
|
||||
#define RADIO_CS_PIN 7
|
||||
|
||||
#define SDCARD_MOSI 11
|
||||
#define SDCARD_MISO 2
|
||||
#define SDCARD_SCLK 14
|
||||
#define SDCARD_CS 13
|
||||
|
||||
#define BOARD_LED 37
|
||||
#define LED_ON HIGH
|
||||
|
||||
#define BUTTON_PIN 0
|
||||
#define ADC_PIN 1
|
||||
|
||||
#define RADIO_RST_PIN 8
|
||||
|
||||
#define BAT_ADC_PULLUP_RES (100000.0)
|
||||
#define BAT_ADC_PULLDOWN_RES (100000.0)
|
||||
#define BAT_MAX_VOLTAGE (4.2)
|
||||
#define BAT_VOL_COMPENSATION (0.0)
|
||||
|
||||
#if defined(USING_SX1262)
|
||||
|
||||
#define RADIO_DIO1_PIN 33
|
||||
#define RADIO_BUSY_PIN 34
|
||||
|
||||
#elif defined(USING_SX1276) || defined(USING_SX1278)
|
||||
//!SX1276/78 module only
|
||||
#define RADIO_BUSY_PIN 33 //DIO1
|
||||
|
||||
#define RADIO_DIO0_PIN 9
|
||||
#define RADIO_DIO1_PIN 33
|
||||
#define RADIO_DIO2_PIN 34
|
||||
#define RADIO_DIO3_PIN 21
|
||||
#define RADIO_DIO4_PIN 10
|
||||
#define RADIO_DIO5_PIN 36
|
||||
|
||||
#elif defined(USING_SX1280)
|
||||
|
||||
#define RADIO_DIO1_PIN 9 //SX1280 DIO1 = IO9
|
||||
#define RADIO_BUSY_PIN 36 //SX1280 BUSY = IO36
|
||||
|
||||
#elif defined(USING_SX1280PA)
|
||||
|
||||
#define RADIO_DIO1_PIN 9 //SX1280 DIO1 = IO9
|
||||
#define RADIO_BUSY_PIN 36 //SX1280 BUSY = IO36
|
||||
#define RADIO_RX_PIN 21
|
||||
#define RADIO_TX_PIN 10
|
||||
|
||||
|
||||
#elif defined(USING_LR1121)
|
||||
|
||||
#define RADIO_DIO9_PIN 36 //LR1121 DIO9 = IO36
|
||||
#define RADIO_BUSY_PIN 34 //LR1121 BUSY = IO34
|
||||
|
||||
#endif
|
||||
|
||||
#define BUTTON_PIN 0
|
||||
|
||||
#define HAS_SDCARD
|
||||
#define HAS_DISPLAY
|
||||
|
||||
#define BOARD_VARIANT_NAME "T3-S3-V1.X"
|
||||
#define DISPLAY_MODEL_SSD_LIB SSD1306Wire
|
||||
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
|
||||
|
||||
#elif defined(T_BEAM_S3_SUPREME_SX1262) || defined(T_BEAM_S3_SUPREME_LR1121)
|
||||
|
||||
#ifndef T_BEAM_S3_SUPREME
|
||||
#define T_BEAM_S3_SUPREME
|
||||
#endif
|
||||
|
||||
#if defined(T_BEAM_S3_SUPREME_SX1262)
|
||||
#ifndef USING_SX1262
|
||||
#define USING_SX1262
|
||||
#endif
|
||||
#elif defined(T_BEAM_S3_SUPREME_LR1121)
|
||||
#ifndef USING_LR1121
|
||||
#define USING_LR1121
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define I2C_SDA (17)
|
||||
#define I2C_SCL (18)
|
||||
|
||||
#define I2C1_SDA (42)
|
||||
#define I2C1_SCL (41)
|
||||
#define PMU_IRQ (40)
|
||||
|
||||
#define GPS_RX_PIN (9)
|
||||
#define GPS_TX_PIN (8)
|
||||
#define GPS_EN_PIN (7)
|
||||
#define GPS_PPS_PIN (6)
|
||||
|
||||
#define BUTTON_PIN (0)
|
||||
#define BUTTON_PIN_MASK (GPIO_SEL_0)
|
||||
#define BUTTON_COUNT (1)
|
||||
#define BUTTON_ARRAY {BUTTON_PIN}
|
||||
|
||||
#define RADIO_SCLK_PIN (12)
|
||||
#define RADIO_MISO_PIN (13)
|
||||
#define RADIO_MOSI_PIN (11)
|
||||
#define RADIO_CS_PIN (10)
|
||||
#define RADIO_DIO0_PIN (-1)
|
||||
#define RADIO_RST_PIN (5)
|
||||
#define RADIO_DIO1_PIN (1)
|
||||
#define RADIO_BUSY_PIN (4)
|
||||
|
||||
// LR1121 Version
|
||||
#define RADIO_DIO9_PIN (1)
|
||||
|
||||
#define SPI_MOSI (35)
|
||||
#define SPI_SCK (36)
|
||||
#define SPI_MISO (37)
|
||||
#define SPI_CS (47)
|
||||
#define IMU_CS (34)
|
||||
#define IMU_INT (33)
|
||||
|
||||
#define SDCARD_MOSI SPI_MOSI
|
||||
#define SDCARD_MISO SPI_MISO
|
||||
#define SDCARD_SCLK SPI_SCK
|
||||
#define SDCARD_CS SPI_CS
|
||||
|
||||
#define RTC_INT (14)
|
||||
|
||||
#define GPS_BAUD_RATE (9600)
|
||||
|
||||
#define HAS_SDCARD
|
||||
#define HAS_GPS
|
||||
#define HAS_DISPLAY
|
||||
#define HAS_PMU
|
||||
|
||||
#define __HAS_SPI1__
|
||||
#define HAS_SENSOR
|
||||
|
||||
#define PMU_WIRE_PORT Wire1
|
||||
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
|
||||
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
|
||||
#define BOARD_VARIANT_NAME "T-Beam S3"
|
||||
|
||||
#elif defined(T_MOTION_S76G)
|
||||
|
||||
#ifndef USING_SX1276
|
||||
#define USING_SX1276
|
||||
#endif
|
||||
|
||||
|
||||
#define RADIO_SCLK_PIN PB13
|
||||
#define RADIO_MISO_PIN PB14
|
||||
#define RADIO_MOSI_PIN PB15
|
||||
#define RADIO_CS_PIN PB12
|
||||
#define RADIO_RST_PIN PB10
|
||||
|
||||
#define RADIO_DIO0_PIN PB11
|
||||
#define RADIO_DIO1_PIN PC13
|
||||
#define RADIO_DIO2_PIN PB9
|
||||
#define RADIO_DIO3_PIN PB4
|
||||
#define RADIO_DIO4_PIN PB3
|
||||
#define RADIO_DIO5_PIN PA15
|
||||
|
||||
#undef RADIO_BUSY_PIN
|
||||
#undef RADIO_DIO1_PIN
|
||||
#define RADIO_BUSY_PIN PC13 //DIO1
|
||||
#define RADIO_DIO1_PIN PB11 //DIO0
|
||||
|
||||
#define RADIO_SWITCH_PIN PA1 //1:Rx, 0:Tx
|
||||
|
||||
#define GPS_EN_PIN PC6
|
||||
#define GPS_RST_PIN PB2
|
||||
#define GPS_RX_PIN PC11
|
||||
#define GPS_TX_PIN PC10
|
||||
#define GPS_ENABLE_PIN PC6
|
||||
#define GPS_BAUD_RATE 115200
|
||||
#define GPS_PPS_PIN PB5
|
||||
|
||||
#define UART_RX_PIN PA10
|
||||
#define UART_TX_PIN PA9
|
||||
|
||||
#define I2C_SCL PB6
|
||||
#define I2C_SDA PB7
|
||||
|
||||
#define BOARD_VARIANT_NAME "T-Motion S76G"
|
||||
|
||||
#define HAS_GPS
|
||||
|
||||
#elif defined(T3_C6)
|
||||
|
||||
|
||||
#ifndef USING_SX1262
|
||||
#define USING_SX1262
|
||||
#endif
|
||||
|
||||
|
||||
#define RADIO_SCLK_PIN 6
|
||||
#define RADIO_MISO_PIN 1
|
||||
#define RADIO_MOSI_PIN 0
|
||||
#define RADIO_CS_PIN 18
|
||||
#define RADIO_DIO1_PIN 23
|
||||
#define RADIO_BUSY_PIN 22
|
||||
#define RADIO_RST_PIN 21
|
||||
|
||||
#define I2C_SDA 8
|
||||
#define I2C_SCL 9
|
||||
|
||||
#define BOARD_LED 7
|
||||
#define LED_ON HIGH
|
||||
#define RADIO_RX_PIN 15
|
||||
#define RADIO_TX_PIN 14
|
||||
|
||||
|
||||
#define BOARD_VARIANT_NAME "T3-C6"
|
||||
|
||||
#define USING_DIO2_AS_RF_SWITCH
|
||||
|
||||
|
||||
#elif defined(T_BEAM_S3_BPF)
|
||||
|
||||
|
||||
#ifndef USING_SX1278
|
||||
#define USING_SX1278
|
||||
#endif
|
||||
|
||||
#define I2C_SDA (8)
|
||||
#define I2C_SCL (9)
|
||||
|
||||
#define PMU_IRQ (4)
|
||||
|
||||
#define GPS_RX_PIN (5)
|
||||
#define GPS_TX_PIN (6)
|
||||
#define GPS_PPS_PIN (7)
|
||||
|
||||
#define BUTTON_PIN (0)
|
||||
#define BUTTON2_PIN (3) /*BUTTON 2 = GPIO3*/
|
||||
#define BUTTON_PIN_MASK GPIO_SEL_0 /*BUTTON 1 = GPIO0*/
|
||||
#define BUTTON_COUNT (2)
|
||||
#define BUTTON_ARRAY {BUTTON_PIN, BUTTON2_PIN /*BUTTON 2 = GPIO3*/}
|
||||
|
||||
#define RADIO_SCLK_PIN (12)//(41)
|
||||
#define RADIO_MISO_PIN (13)//(42)
|
||||
#define RADIO_MOSI_PIN (11)//(2)
|
||||
#define RADIO_CS_PIN (1)
|
||||
#define RADIO_RST_PIN (18)
|
||||
|
||||
#define RADIO_DIO0_PIN (14)
|
||||
#define RADIO_DIO1_PIN (21)
|
||||
|
||||
// #define RADIO_TCXO_ENABLE (17)
|
||||
#define RADIO_LDO_EN (16)
|
||||
#define RADIO_CTRL (39)
|
||||
|
||||
#define SPI_MOSI (11)
|
||||
#define SPI_SCK (12)
|
||||
#define SPI_MISO (13)
|
||||
#define SPI_CS (10)
|
||||
|
||||
#define SDCARD_MOSI SPI_MOSI
|
||||
#define SDCARD_MISO SPI_MISO
|
||||
#define SDCARD_SCLK SPI_SCK
|
||||
#define SDCARD_CS SPI_CS
|
||||
|
||||
|
||||
#define GPS_BAUD_RATE 9600
|
||||
|
||||
#define HAS_SDCARD
|
||||
#define HAS_GPS
|
||||
#define HAS_DISPLAY
|
||||
#define HAS_PMU
|
||||
#define SD_SHARE_SPI_BUS
|
||||
|
||||
#define PMU_WIRE_PORT Wire
|
||||
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
|
||||
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
|
||||
#define BOARD_VARIANT_NAME "T-Beam BPF"
|
||||
|
||||
|
||||
#elif defined(T_BEAM_1W)
|
||||
|
||||
#ifndef USING_SX1262
|
||||
#define USING_SX1262
|
||||
#endif
|
||||
|
||||
#define I2C_SDA (8)
|
||||
#define I2C_SCL (9)
|
||||
|
||||
#define GPS_RX_PIN (5)
|
||||
#define GPS_TX_PIN (6)
|
||||
#define GPS_PPS_PIN (7)
|
||||
#define GPS_EN_PIN (16)
|
||||
|
||||
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
|
||||
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
|
||||
|
||||
#define BUTTON_PIN_MASK GPIO_SEL_0
|
||||
#define BUTTON_COUNT (2)
|
||||
#define BUTTON_ARRAY {BUTTON_PIN,BUTTON2_PIN/*BUTTON 2 = GPIO3*/}
|
||||
|
||||
#define SPI_MOSI (11)
|
||||
#define SPI_SCK (13)
|
||||
#define SPI_MISO (12)
|
||||
#define SPI_CS (10)
|
||||
|
||||
#define SDCARD_CS SPI_CS
|
||||
|
||||
#define RADIO_SCLK_PIN (SPI_SCK)
|
||||
#define RADIO_MISO_PIN (SPI_MISO)
|
||||
#define RADIO_MOSI_PIN (SPI_MOSI)
|
||||
|
||||
#define RADIO_CS_PIN (15)
|
||||
#define RADIO_RST_PIN (3)
|
||||
#define RADIO_LDO_EN (40)
|
||||
#define RADIO_CTRL (21)
|
||||
#define RADIO_DIO1_PIN (1)
|
||||
#define RADIO_BUSY_PIN (38)
|
||||
|
||||
#define BOARD_LED 18
|
||||
#define LED_ON HIGH
|
||||
#define LED_OFF LOW
|
||||
|
||||
|
||||
#define NTC_PIN (14)
|
||||
#define FAN_CTRL (41)
|
||||
#define ADC_PIN (4)
|
||||
|
||||
#define BAT_ADC_PULLUP_RES (300000.0)
|
||||
#define BAT_ADC_PULLDOWN_RES (150000.0)
|
||||
#define BAT_MAX_VOLTAGE (7.4)
|
||||
#define BAT_VOL_COMPENSATION (0.25)
|
||||
#define GPS_SLEEP_HOLD_ON_LOW
|
||||
|
||||
#define GPS_BAUD_RATE 9600
|
||||
|
||||
#define HAS_SDCARD
|
||||
#define HAS_GPS
|
||||
#define HAS_DISPLAY
|
||||
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
|
||||
#define __HAS_SPI1__
|
||||
|
||||
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
|
||||
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
|
||||
#define BOARD_VARIANT_NAME "LoRa 2W"
|
||||
|
||||
#else
|
||||
#error "When using it for the first time, please define the board model in <utilities.h> 首次使用时，请在<utilities.h> 文件最上方定义板卡模型"
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#if defined(USING_SX1262)
|
||||
#define RADIO_TYPE_STR "SX1262"
|
||||
#elif defined(USING_SX1276)
|
||||
#define RADIO_TYPE_STR "SX1276"
|
||||
#elif defined(USING_SX1278)
|
||||
#define RADIO_TYPE_STR "SX1278"
|
||||
#elif defined(USING_LR1121)
|
||||
#define RADIO_TYPE_STR "LR1121"
|
||||
#elif defined(USING_SX1280)
|
||||
#define RADIO_TYPE_STR "SX1280"
|
||||
#elif defined(USING_SX1280PA)
|
||||
#define RADIO_TYPE_STR "SX1280PA"
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Loading…
Add table
Add a link
Reference in a new issue