jlpoole/LilyGo-LoRa-Series
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

Update board pin list

Browse source
This commit is contained in:
lewisxhe 2025-07-07 18:13:41 +08:00
commit c50fb85d38
50 changed files with 950 additions and 1150 deletions
Download patch file Download diff file Expand all files Collapse all files

42
examples/Sensor/BME280_AdvancedsettingsExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/BME280_TestExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/BME280_UnifiedExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/PCF8563_AlarmByUnits/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/PCF8563_SimpleTime/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/PCF8563_TimeLib/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/PCF8563_TimeSynchronization/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMC6310_CalibrateExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMC6310_CompassExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMC6310_GetDataExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMC6310_GetPolarExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_BlockExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_GetDataExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_InterruptBlockExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_InterruptExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_LockingMechanismExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_MadgwickAHRS/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_PedometerExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_ReadFromFifoExample/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif

42
examples/Sensor/QMI8658_WakeOnMotion/utilities.h
View file

@ -4,7 +4,7 @@
* @license MIT
* @copyright Copyright (c) 2024 ShenZhen XinYuan Electronic Technology Co., Ltd
* @date 2024-05-12
* @last-update 2024-08-07
* @last-update 2025-07-07
*/
#pragma once
@ -41,6 +41,8 @@
// #define T_BEAM_S3_BPF
// #define T_BEAM_2W
#define UNUSED_PIN (0)
@ -433,7 +435,7 @@
#define GPS_RX_PIN (9)
#define GPS_TX_PIN (8)
#define GPS_EN_PIN (7) //L76K only
#define GPS_EN_PIN (7)
#define GPS_PPS_PIN (6)
#define BUTTON_PIN (0)
@ -609,7 +611,7 @@
#define HAS_GPS
#define HAS_DISPLAY
#define HAS_PMU
#define SD_SHARE_SPI_BUS
#define SD_SHARE_SPI_BUS
#define PMU_WIRE_PORT Wire
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
@ -629,10 +631,10 @@
#define GPS_RX_PIN (5)
#define GPS_TX_PIN (6)
#define GPS_PPS_PIN (7)
#define GPS_EN_PIN (10)
#define GPS_EN_PIN (16)
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (2) /*BUTTON 2 = GPIO3*/
#define BUTTON_PIN (0) /*BUTTON 1 = GPIO0*/
#define BUTTON2_PIN (17) /*BUTTON 2 = GPIO17*/
#define BUTTON_PIN_MASK GPIO_SEL_0
#define BUTTON_COUNT (2)
@ -643,9 +645,11 @@
#define SPI_MISO (12)
#define SPI_CS (10)
#define RADIO_SCLK_PIN (16)
#define RADIO_MISO_PIN (17)
#define RADIO_MOSI_PIN (18)
#define SDCARD_CS SPI_CS
#define RADIO_SCLK_PIN (SPI_SCK)
#define RADIO_MISO_PIN (SPI_MISO)
#define RADIO_MOSI_PIN (SPI_MOSI)
#define RADIO_CS_PIN (15)
#define RADIO_RST_PIN (3)
@ -654,10 +658,10 @@
#define RADIO_DIO1_PIN (1)
#define RADIO_BUSY_PIN (38)
// #define SDCARD_MOSI SPI_MOSI
// #define SDCARD_MISO SPI_MISO
// #define SDCARD_SCLK SPI_SCK
// #define SDCARD_CS SPI_CS
#define BOARD_LED 18
#define LED_ON HIGH
#define LED_OFF LOW
#define NTC_PIN (14)
#define FAN_CTRL (41)
@ -671,24 +675,16 @@
#define GPS_BAUD_RATE 9600
// #define HAS_SDCARD
#define HAS_SDCARD
#define HAS_GPS
#define HAS_DISPLAY
#define SD_SHARE_SPI_BUS // SD-CARD AND RADIO SHARE SPI BUS
#define __HAS_SPI1__
#define DISPLAY_MODEL U8G2_SH1106_128X64_NONAME_F_HW_I2C
#define DISPLAY_MODEL_SSD_LIB SH1106Wire
#define BOARD_VARIANT_NAME "LoRa 2W"
/*
* 2w LoRa max set power is +3 dBm ,After passing through PA, the power can reach 33dBm
* -3dBm = +27dBm
* 0 dBm = +30dBm
* 3 dBm = +33dBm
* */
#define RADIO_MAX_OUTPUT_POWER 3
#else
#error "When using it for the first time, please define the board model in <utilities.h>"
#endif