jlpoole/LilyGo-LoRa-Series
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 1

Update T3 S3 factory examples

Browse source
This commit is contained in:
lewishe 2023-05-15 09:21:02 +08:00
commit c80e640460
1 changed files with 12 additions and 11 deletions
Download patch file Download diff file Expand all files Collapse all files

23
examples/T3S3Factory/T3S3Factory.ino
View file

@ -25,11 +25,9 @@ void radioTx(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t
void radioRx(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
void hwInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
void setFlag(void);
void msOverlay(OLEDDisplay *display, OLEDDisplayUiState *state);
// ! Please select the corresponding RF module
#define USING_SX1262
// #define USING_SX1262
// #define USING_SX1268
// #define USING_SX1276
// #define USING_SX1278
@ -45,17 +43,17 @@ uint8_t txPower = 22;
float radioFreq = 433.0;
SX1268
#elif defined(USING_SX1276)
uint8_t txPower = 20;
uint8_t txPower = 17;
float radioFreq = 868.0;
SX1276
#elif defined(USING_SX1278)
uint8_t txPower = 20;
uint8_t txPower = 17;
float radioFreq = 433.0;
SX1278
#elif defined(USING_SX1280)
#undef RADIO_DIO1_PIN
#define RADIO_DIO1_PIN 9 //SX1280 DIO1 = IO9
uint8_t txPower = 3;
uint8_t txPower = 3; //The SX1280 PA version cannot set the power over 3dBm, otherwise it will burn the PA
float radioFreq = 2400.0;
SX1280
#else
@ -193,21 +191,19 @@ void setup()
isRadioOnline = state == RADIOLIB_ERR_NONE;
// set output power to 10 dBm (accepted range is -3 - 17 dBm)
// NOTE: 20 dBm value allows high power operation, but transmission
// duty cycle MUST NOT exceed 1%
// The SX1280 PA version cannot set the power over 3dBm, otherwise it will burn the PA
// Other types of modules are standard transmission power.
if (radio.setOutputPower(txPower) == RADIOLIB_ERR_INVALID_OUTPUT_POWER) {
Serial.println(F("Selected output power is invalid for this module!"));
}
#ifdef USING_SX1280
//Set ANT Control pins
//The SX1280 version needs to set RX, TX antenna switching pins
radio.setRfSwitchPins(RADIO_RX_PIN, RADIO_TX_PIN);
#endif
#ifndef USING_SX1280
// set bandwidth to 250 kHz
if (radio.setBandwidth(250.0) == RADIOLIB_ERR_INVALID_BANDWIDTH) {
Serial.println(F("Selected bandwidth is invalid for this module!"));
@ -222,7 +218,12 @@ void setup()
// set the function that will be called
// when new packet is received
#if defined(USING_SX1276) || defined(USING_SX1278)
radio.setDio1Action(setFlag, RISING);
#else
radio.setDio1Action(setFlag);
#endif
// start listening for LoRa packets
Serial.print(F("[Radio] Starting to listen ... "));