Update lib

lib/RadioLib/examples/LoRaWAN/LoRaWAN_Reference/config.h

@@ -0,0 +1,126 @@
+#ifndef _CONFIG_H
+#define _CONFIG_H
+
+#include <RadioLib.h>
+
+// how often to send an uplink - consider legal & FUP constraints - see notes
+const uint32_t uplinkIntervalSeconds = 5UL * 60UL;    // minutes x seconds
+
+// joinEUI - previous versions of LoRaWAN called this AppEUI
+// for development purposes you can use all zeros - see wiki for details
+#define RADIOLIB_LORAWAN_JOIN_EUI  0x0000000000000000
+
+// the Device EUI & two keys can be generated on the TTN console 
+#ifndef RADIOLIB_LORAWAN_DEV_EUI   // Replace with your Device EUI
+#define RADIOLIB_LORAWAN_DEV_EUI   0x---------------
+#endif
+#ifndef RADIOLIB_LORAWAN_APP_KEY   // Replace with your App Key 
+#define RADIOLIB_LORAWAN_APP_KEY   0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x-- 
+#endif
+#ifndef RADIOLIB_LORAWAN_NWK_KEY   // Put your Nwk Key here
+#define RADIOLIB_LORAWAN_NWK_KEY   0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x--, 0x-- 
+#endif
+
+// for the curious, the #ifndef blocks allow for automated testing &/or you can
+// put your EUI & keys in to your platformio.ini - see wiki for more tips
+
+// regional choices: EU868, US915, AU915, AS923, IN865, KR920, CN780, CN500
+const LoRaWANBand_t Region = EU868;
+const uint8_t subBand = 0;  // For US915, change this to 2, otherwise leave on 0
+
+// ============================================================================
+// Below is to support the sketch - only make changes if the notes say so ...
+
+// Auto select MCU <-> radio connections
+// If you get an error message when compiling, it may be that the 
+// pinmap could not be determined - see the notes for more info
+
+// Adafruit
+#if defined(ARDUINO_SAMD_FEATHER_M0)
+    #pragma message ("Adafruit Feather M0 with RFM95")
+    #pragma message ("Link required on board")
+    SX1276 radio = new Module(8, 3, 4, 6);
+
+
+// LilyGo 
+#elif defined(ARDUINO_TTGO_LORA32_V1)
+  #pragma message ("TTGO LoRa32 v1 - no Display")
+  SX1276 radio = new Module(18, 26, 14, 33);
+
+#elif defined(ARDUINO_TTGO_LORA32_V2)
+   #pragma error ("ARDUINO_TTGO_LORA32_V2 awaiting pin map")
+
+#elif defined(ARDUINO_TTGO_LoRa32_v21new) // T3_V1.6.1
+  #pragma message ("Using TTGO LoRa32 v2.1 marked T3_V1.6.1 + Display")
+  SX1276 radio = new Module(18, 26, 14, 33);
+
+#elif defined(ARDUINO_TBEAM_USE_RADIO_SX1262)
+  #pragma error ("ARDUINO_TBEAM_USE_RADIO_SX1262 awaiting pin map")
+
+#elif defined(ARDUINO_TBEAM_USE_RADIO_SX1276)
+  #pragma message ("Using TTGO LoRa32 v2.1 marked T3_V1.6.1 + Display")
+  SX1276 radio = new Module(18, 26, 23, 33);
+
+
+// Heltec
+#elif defined(ARDUINO_HELTEC_WIFI_LORA_32)
+  #pragma error ("ARDUINO_HELTEC_WIFI_LORA_32 awaiting pin map")
+
+#elif defined(ARDUINO_heltec_wifi_kit_32_V2)
+  #pragma message ("ARDUINO_heltec_wifi_kit_32_V2 awaiting pin map")
+  SX1276 radio = new Module(18, 26, 14, 35);
+
+#elif defined(ARDUINO_heltec_wifi_kit_32_V3)
+  #pragma message ("Using Heltec WiFi LoRa32 v3 - Display + USB-C")
+  SX1262 radio = new Module(8, 14, 12, 13);
+
+#elif defined(ARDUINO_CUBECELL_BOARD)
+  #pragma message ("Using TTGO LoRa32 v2.1 marked T3_V1.6.1 + Display")
+  SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
+
+#elif defined(ARDUINO_CUBECELL_BOARD_V2)
+  #pragma error ("ARDUINO_CUBECELL_BOARD_V2 awaiting pin map")
+
+
+#else
+  #pragma message ("Unknown board - no automagic pinmap available")
+
+  // SX1262  pin order: Module(NSS/CS, DIO1, RESET, BUSY);
+  // SX1262 radio = new Module(8, 14, 12, 13);
+
+  // SX1278 pin order: Module(NSS/CS, DIO0, RESET, DIO1);
+  // SX1278 radio = new Module(10, 2, 9, 3);
+
+#endif
+
+// copy over the EUI's & keys in to the something that will not compile if incorrectly formatted
+uint64_t joinEUI =   RADIOLIB_LORAWAN_JOIN_EUI;
+uint64_t devEUI  =   RADIOLIB_LORAWAN_DEV_EUI;
+uint8_t appKey[] = { RADIOLIB_LORAWAN_APP_KEY };
+uint8_t nwkKey[] = { RADIOLIB_LORAWAN_NWK_KEY };
+
+// create the LoRaWAN node
+LoRaWANNode node(&radio, &Region, subBand);
+
+// helper function to display any issues
+void debug(bool isFail, const __FlashStringHelper* message, int state, bool Freeze) {
+  if (isFail) {
+    Serial.print(message);
+    Serial.print("(");
+    Serial.print(state);
+    Serial.println(")");
+    while (Freeze);
+  }
+}
+
+// helper function to display a byte array
+void arrayDump(uint8_t *buffer, uint16_t len) {
+  for(uint16_t c = 0; c < len; c++) {
+    char b = buffer[c];
+    if(b < 0x10) { Serial.print('0'); }
+    Serial.print(b, HEX);
+  }
+  Serial.println();
+}
+
+#endif