Update examples

.gitignore

@@ -6,4 +6,5 @@
 .vscode
 test
 .gitignore
-.travis.yml
+.travis.yml
+lib

README.MD

@@ -1,7 +1,6 @@
 TTGO-T-Beam
 =====================
 
-
 ![](image/product.jpg)
 
 
@@ -12,7 +11,9 @@ TTGO-T-Beam
 | LORA_MISO   | 19             | 19         |
 | LORA_MOSI   | 27             | 27         |
 | LORA_SS     | 18             | 18         |
-| LORA_DI0    | 26             | 26         |
+| LORA_DIO0   | 26             | 26         |
+| LORA_DIO1   | 33             | 33         |
+| LORA_DIO2   | 32             | 32         |
 | LORA_RST    | 23             | 23         |
 | GPS_RX_PIN  | 34             | 12         |
 | GPS_TX_PIN  | 12             | 15         |
@@ -37,7 +38,7 @@ TTGO-T-Beam
 
 
 ##  Button Function:
-- Click button 2 will cycle the motherboard function, the default start to enable GPS positioning, the second click will be set to lora send, the third click will be set to lora receive, long press for two seconds and then release, will enter deep sleep
+- Click button 2 will cycle the user function, the default start to enable GPS positioning, the second click will be set to lora send, the third click will be set to lora receive, long press for two seconds and then release, will enter deep sleep
 
 ## About OLED:
 - The boot will scan the I2C device. If the OLED is found, all log information will be displayed in the OLED. If not, it will be printed on the serial port.

platformio.ini

@@ -13,10 +13,8 @@ platform = espressif32
 board = esp32dev
 framework = arduino
 
-upload_port = COM11
+upload_port = COM26
-monitor_port = COM11
+monitor_port = COM26
-; upload_port = COM8
-; monitor_port = COM8
 
 monitor_speed = 115200
 upload_speed = 2000000
@@ -26,7 +24,7 @@ lib_deps =
     AXP202X_Library             ;https://github.com/lewisxhe/AXP202X_Library
     TinyGPSPlus                 ;https://github.com/mikalhart/TinyGPSPlus
     ESP8266_SSD1306             ;https://github.com/ThingPulse/esp8266-oled-ssd1306
-    LoRa                        ;https://github.com/dragino/Lora
+    RadioLib                    ;https://github.com/jgromes/RadioLib
 
 
 

src/board_def.h

@@ -1,3 +1,7 @@
+/*
+*   This factory is just to test LilyGo T-Beam series hardware
+*   Created by Lewis he
+* */
 #ifndef BOARD_DEF_H
 #define BOARD_DEF_H
 
@@ -8,8 +12,7 @@
 #define ENABLE_GPS
 #define ENABLE_LOAR
 
-
+#define SSD1306_ADDRESS         0x3C
-#define SSD1306_ADDRESS 0x3c
 #ifdef ENABLE_SSD1306
 #include "SSD1306.h"
 #include "OLEDDisplayUi.h"
@@ -20,20 +23,38 @@
 #endif
 
 #ifdef ENABLE_LOAR
-#include <LoRa.h>
+#include <RadioLib.h>
 
-#define LORA_PERIOD 868
+/*
+Replace the model according to the actual situation
+
+RADIO_TYPE option:
+            - SX1278
+            - SX1276
+            - SX1262
+*/
+#define RADIO_TYPE      SX1262
+
+/*
+Fill in the frequency according to the actual situation
+LORA_PERIOD option:
+            - 433,470,868,915
+*/
+#define LORA_PERIOD     915
+
+
+#define LORA_SCK        5
+#define LORA_MISO       19
+#define LORA_MOSI       27
+#define LORA_SS         18
+#define LORA_DI0        26
+#define LORA_RST        23
+#define LORA_DIO1       33
+#define LORA_BUSY       32
 
-#define LORA_SCK     5
-#define LORA_MISO    19
-#define LORA_MOSI    27
-#define LORA_SS      18
-#define LORA_DI0     26
-#define LORA_RST     23
 
 #endif
 
-//GPS模块
 #ifdef ENABLE_GPS
 #include <TinyGPS++.h>
 #define UBLOX_GPS_OBJECT()  TinyGPSPlus gps
@@ -57,13 +78,15 @@ UBLOX_GPS_OBJECT()
 
 #ifdef ENABLE_LOAR
 #if LORA_PERIOD == 433
-#define BAND 433E6
+#define BAND 433.0
 #elif LORA_PERIOD == 868
-#define BAND 868E6
+#define BAND 868.0
 #elif LORA_PERIOD == 915
-#define BAND 915E6
+#define BAND 915.0
+#elif LORA_PERIOD == 470
+#define BAND 470.0
 #else
-#define BAND 433E6
+#define BAND 433.0
 #endif
 #endif
 
@@ -71,8 +94,6 @@ UBLOX_GPS_OBJECT()
 #define I2C_SDA             21
 #define I2C_SCL             22
 #define PMU_IRQ             35
-#define GPS_POWER_CTRL_CH   3
-#define LORA_POWER_CTRL_CH  2
 
 #define ENABLE_BUZZER
 #define BUZZER_PIN          4