LilyGo-LoRa-Series/lib/XPowersLib

 __   __     _____                           _      _ _
 \ \ / /    |  __ \                         | |    (_) |
  \ V /_____| |__) |____      _____ _ __ ___| |     _| |__
   > <______|  ___/ _ \ \ /\ / / _ \ '__/ __| |    | | '_ \
  / . \     | |  | (_) \ V  V /  __/ |  \__ \ |____| | |_) |
 /_/ \_\    |_|   \___/ \_/\_/ \___|_|  |___/______|_|_.__/

🎉 LilyGo invests time and resources to provide this open source code, please support LilyGo 
and open source hardware by purchasing products from LilyGo!
Written by Lewis He for LilyGo. MIT license, all text above must be included in 
any redistribution

❗️❗️❗️ WARN:

⚠️ Please do not run the example without knowing the external load voltage of the PMU,
it may burn your external load,please check the voltage setting before running the example,
if there is any loss,please bear it by yourself

✨ Library specially written for XPowers, supporting CircuitPython, Micropython, Arduino, ESP-IDF

✨ Through esp32,esp32s3 verification,other platforms have not been tested. Due to the many functions of the chip,it cannot be verified one by one.

Chip Resource List

CHIP	AXP192	AXP202	AXP2101	Remarks
DC1	0.7V-3.5V /1.2A	X	1.5-3.4V /2A
DC2	0.7-2.275V /1.6A	0.7-2.275V /1.6A	0.5-1.2V,1.22-1.54V /2A
DC3	0.7-3.5V /0.7A	0.7-3.5V /1.2A	0.5-1.2V,1.22-1.54V,1.6-3.4V /2A
DC4	x	x	0.5-1.2V,1.22-1.84V /1.5A
DC5	x	x	1.2V,1.4-3.7V /1A
LDO1(VRTC)	3.3V /30mA	3.3V /30mA	1.8V /30mA
LDO2	1.8V-3.3V /200mA	1.8V-3.3V /200mA	x
LDO3	1.8-3.3V /200mA	0.7-3.5V /200mA	x
LDO4	X	1.8V-3.3V /200mA	x
LDO5/IO0	1.8-3.3V /50mA	1.8-3.3V /50mA	x
ALDO1	x	x	0.5-3.5V /300mA
ALDO2	x	x	0.5-3.5V /300mA
ALDO3	x	x	0.5-3.5V /300mA
ALDO4	x	x	0.5-3.5V /300mA
BLDO1	x	x	0.5-3.5V /300mA
BLDO2	x	x	0.5-3.5V /300mA
DLDO1	x	x	0.5-3.3V/ 0.5-1.4V /300mA
DLDO1	x	x	0.5-3.3V/ 0.5-1.4V /300mA
CPUSLDO	x	x	0.5-1.4V /30mA	Dependent on DC4

AXP2101 Notes:

• Whether DLDO1/DLDO2/RTCLDO2/GPIO1 can be used depends on the chip. It is not available by default. RTCLDO1 has a default voltage, which is generally 1.8V by default. The voltage value cannot be changed or turned off through the register.