🌟LilyGo LoRa Series🌟

English | 中文

Quick start:

1. Copy all folders in the libdeps directory to the ~/Arduino/libraries directory, and put them in "Documents/Arduino/libraries" for Windons users
2. Open the corresponding example
3. T-Beam users can choose TTGO T-Beam, lora32(T3) users can choose ESP32 Dev Module , T-Motion users choose Nucleo_l073RZ
4. Select the port of the board in the port
5. For other examples except the GPS directory, please uncomment in the upper part of utilities.h according to your board model, otherwise the compilation will report an error
6. Upload

Product 📷:

Product	Product Link	Schematic
T-Beam SX1278/76	Product link	TBeamV0.7/ TBeamV1.0/ TBeamV1.1
T-Beam SX1262	Product link	TBeamV0.7/ TBeamV1.0/ TBeamV1.1
LoRa32 V1.0 SX1276	Product link	❌
LoRa32 V1.0 SX1278	Product link	❌
LoRa32 V1.3 SX1276	Product link	LoRa32 V1.3
LoRa32 V2.0	Product link	LoRa32 V2.0
LoRa32 V2.1_1.6 Version	AliExpress/Amazon	LoRa32 V2.1_1.6
T-Motion S76G	Product link	T-Motion
LoRa32 V1.8 2.4G	🔱Product link	LoRa32 V1.8 2.4G

Example description

examples
├─ArduinoLoRa                                   # Just only support SX1276/SX1278 radio module
│  ├─LoRaReceiver
│  └─LoRaSender
├─GPS                                           # T-Beam GPS demo examples
│  ├─Example1_BasicNMEARead
│  ├─Example2_NMEAParsing
│  ├─Example3_FactoryDefaultsviaSerial
│  ├─TinyGPS_Example
│  └─TinyGPS_KitchenSink
├─OLED                                          # OLED demo examples
│  ├─SSD1306SimpleDemo
│  └─SSD1306UiDemo
├─RadioLibExamples                              # RadioLib examples,Support SX1276/78/62/80
│  ├─SX1262
│  │  ├─SX1262_Receive_Interrupt
│  │  └─SX1262_Transmit_Interrupt
│  ├─SX1268
│  │  ├─SX1268_Receive_Interrupt
│  │  └─SX1268_Transmit_Interrupt
│  ├─SX1276
│  │  ├─SX1276_Receive_Interrupt
│  │  └─SX1276_Transmit_Interrupt
│  ├─SX1278
│  │  ├─SX1278_Receive
│  │  ├─SX1278_Receive_Interrupt
│  │  ├─SX1278_Transmit
│  │  └─SX1278_Transmit_Interrupt
│  ├─SX1280
│  │  ├─SX128x_Receive_Interrupt
│  │  └─SX128x_Transmit_Interrupt
│  └─TBeamAllFunction                           # T-Beam all function example
├─SleepTest
└─TTN                                           # OTAA method Join TTN example
    └─TTN_OTTA

Precautions :

1. If there is no data output from GPS, see Restoring factory defaults

PinOut :

• See utilities.h

Application :

• T-Beam SoftRF
• T-Beam Paxcounter
• T-Beam Meshtastic

TTN

To quickly start using TTN (The Things Network), please refer to LilyGo_LoRa_Series_Quick_Start

Datasheet :

• AXP192
• SX1262
• SX1278
• SX1276
• SX1280
• GSP NEO-6/NEO-8

Announcements :

1. After setting the LoRa output power, set the lowest current. Set sx1262 as follows :

    // digitalWrite(LoRa_Busy, LOW);
    // set output power to 10 dBm (accepted range is -17 - 22 dBm)
    if (radio.setOutputPower(22) == RADIOLIB_ERR_INVALID_OUTPUT_POWER) {
        Serial.println(F("Selected output power is invalid for this module!"));
        while (true);
    }


    // set over current protection limit to 80 mA (accepted range is 45 - 240 mA)
    // NOTE: set value to 0 to disable overcurrent protection
    if (radio.setCurrentLimit(80) == RADIOLIB_ERR_INVALID_CURRENT_LIMIT) {
        Serial.println(F("Selected current limit is invalid for this module!"));
        while (true);
    }