Exercises 00 & 01 working, Documentation still in progress, moving to my source control server.

exercises/00_usb_radio_check/src/main.cpp

@@ -0,0 +1,60 @@
+#include <Arduino.h>
+#include <SPI.h>
+#include <RadioLib.h>
+
+#ifndef LORA_FREQ
+#define LORA_FREQ 915.000
+#endif
+
+#ifndef LORA_SF
+#define LORA_SF 7
+#endif
+
+#ifndef LORA_BW
+#define LORA_BW 125
+#endif
+
+#ifndef LORA_CR
+#define LORA_CR 5
+#endif
+
+
+// SX1262 on T-Beam Supreme (tbeam-s3-core pinout)
+SX1262 radio = new Module(LORA_CS, LORA_DIO1, LORA_RESET, LORA_BUSY);
+int state; // = radio.begin(915.0, 125.0, 7, 5, 0x12, 14);
+
+void setup() {
+  Serial.begin(115200);
+  delay(2000);   // give USB time to enumerate
+  Serial.println("Booting LoRa test...");
+  Serial.println();
+
+  Serial.println("Initializing radio...");
+  SPI.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
+  Serial.printf("Radio chip: SX1262\r\n");
+  Serial.printf("Frequency: %.3f MHz\r\n", (double)LORA_FREQ);
+  Serial.printf("SF: %d BW: %d CR: %d\r\n", LORA_SF, LORA_BW, LORA_CR);
+
+  int state = radio.begin(915.0, 125.0, 7, 5, 0x12, 14);
+  
+  Serial.printf("radio.begin returned: %d\r\n", state);
+
+
+
+}
+
+void loop() {
+  static uint32_t counter = 0;
+  Serial.printf("alive %lu\n", counter++);
+  
+  Serial.println("Sending test frame...");
+  int tx = radio.transmit("USB RADIO CHECK");
+  Serial.printf("TX state: %d\r\n", tx);
+
+  // we're not expecting to receive anything, just testing that we
+  // can call Receive()
+  Serial.println("Starting receive...");
+  state = radio.startReceive();
+  Serial.printf("startReceive returned: %d\r\n", state);
+  delay(1000);
+}