All printed successfully

orca-slicer/settings/PolyLite PLA @System - Z-Tower.info

@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = OGFSL19
+updated_time = 0

orca-slicer/settings/PolyLite PLA @System - Z-Tower.json

@@ -0,0 +1,16 @@
+{
+    "compatible_printers": [
+        "Sovol SV06 ACE 0.4 nozzle"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "filament_settings_id": [
+        "PolyLite PLA @System - Z-Tower"
+    ],
+    "from": "User",
+    "inherits": "PolyLite PLA @System",
+    "is_custom_defined": "0",
+    "name": "PolyLite PLA @System - Z-Tower",
+    "version": "2.3.0.3"
+}

orca-slicer/settings/Y-bar_20260317_final.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 0

orca-slicer/settings/Y-bar_20260317_final.json

@@ -0,0 +1,24 @@
+{
+    "bottom_shell_layers": "5",
+    "brim_type": "outer_only",
+    "from": "User",
+    "inherits": "0.20mm Standard @Sovol SV06 ACE",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "80",
+    "is_custom_defined": "0",
+    "line_width": "0.42",
+    "name": "Y-bar_20260317_final",
+    "only_one_wall_top": "0",
+    "outer_wall_acceleration": "1500",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "Y-bar_20260317_final",
+    "skirt_loops": "2",
+    "sparse_infill_density": "20%",
+    "sparse_infill_pattern": "gyroid",
+    "top_shell_layers": "5",
+    "top_solid_infill_flow_ratio": "1",
+    "version": "2.3.0.3",
+    "wall_loops": "3"
+}

orca-slicer/settings/Z-tower_20260317_final.info

@@ -0,0 +1,5 @@
+sync_info = update
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 0

orca-slicer/settings/Z-tower_20260317_final.json

@@ -0,0 +1,26 @@
+{
+    "bottom_shell_layers": "5",
+    "brim_type": "outer_only",
+    "from": "User",
+    "inherits": "0.20mm Standard @Sovol SV06 ACE",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "80",
+    "is_custom_defined": "0",
+    "line_width": "0.42",
+    "name": "Z-tower_20260317_final",
+    "notes": "Orca serialization note\n\nIn Orca Slicer 2.3.0.3, some live profile values may not appear in the saved process JSON even when they are active in the UI. For the Z-tower profile, Sparse infill density was verified in the live UI as 10% before slicing, even though the saved JSON did not include a sparse_infill_density key.\n\nScreenshot was taken showing the 10% value, 20260318_184351_Wed.png",
+    "only_one_wall_top": "0",
+    "outer_wall_acceleration": "1500",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "40",
+    "print_settings_id": "Z-tower_20260317_final",
+    "seam_gap": "0",
+    "seam_position": "back",
+    "skirt_loops": "2",
+    "sparse_infill_pattern": "line",
+    "top_shell_layers": "5",
+    "top_solid_infill_flow_ratio": "1",
+    "version": "2.3.0.3",
+    "wall_loops": "3"
+}

orca-slicer/settings/cube_20260317_final.info

@@ -0,0 +1,5 @@
+sync_info = create
+user_id = 
+setting_id = 
+base_id = GP004
+updated_time = 0

orca-slicer/settings/cube_20260317_final.json

@@ -0,0 +1,23 @@
+{
+    "bottom_shell_layers": "5",
+    "brim_type": "no_brim",
+    "from": "User",
+    "inherits": "0.20mm Standard @Sovol SV06 ACE",
+    "initial_layer_line_width": "0.42",
+    "initial_layer_print_height": "0.2",
+    "inner_wall_speed": "80",
+    "is_custom_defined": "0",
+    "line_width": "0.42",
+    "name": "cube_20260317_final",
+    "only_one_wall_top": "0",
+    "outer_wall_acceleration": "1500",
+    "outer_wall_line_width": "0.42",
+    "outer_wall_speed": "60",
+    "print_settings_id": "cube_20260317_final",
+    "seam_position": "back",
+    "skirt_loops": "2",
+    "sparse_infill_pattern": "grid",
+    "top_shell_layers": "5",
+    "top_solid_infill_flow_ratio": "1",
+    "version": "2.3.0.3"
+}