101 lines
5.9 KiB
Markdown
101 lines
5.9 KiB
Markdown
<div align="center" markdown="1">
|
||
<img src=".github/LilyGo_logo.png" alt="LilyGo logo" width="100"/>
|
||
</div>
|
||
|
||
<h1 align = "center">🌟LilyGo LoRa Series🌟</h1>
|
||
|
||
## News
|
||
|
||
- Arduino IDE users need to configure the board to be used in the <utilities.h> file in the sketch directory before using the example. The <utilities.h> file contains the pin definitions of the board. If you do not select it, an error will occur during compilation.
|
||
- Arduino IDE 用户需要在 Sketch 目录下的 <utilities.h> 文件的最上方配置要使用的开发板，然后才能使用该示例。<utilities.h> 文件包含开发板的引脚定义。如果您未选择该文件，编译时将出现错误。
|
||
- ⚠️ If using the PA version, please carefully read the PA power setting limits on the corresponding page. Incorrect output power settings may damage the PA.
|
||
- ⚠️ 如果使用PA版本，请仔细阅读对应页面的PA功率设置限制，错误的设置输出功率很有可能会损坏PA
|
||
|
||
|
||
### `1` Get Started
|
||
|
||
- 🔧 **[T-Beam Quick Start](./docs/en/t_beam/t_beam_hw.md)**
|
||
- 🔧 **[T-Beam Supreme Quick Start](./docs/en/t_beam_supreme/t_beam_supreme_hw.md)**
|
||
- 🔧 **[T-Beam BPF Quick Start](./docs/en/t_beam_bpf/t_beam_bpf_hw.md)**
|
||
- 🔧 **[T-Beam 1W Quick Start](./docs/en/t_beam_1w/t_beam_1w_hw.md)**
|
||
- 🔧 **[LoRa32 V1.3 Quick Start](./docs/en/t3_v13_sx1276/t3_v13_sx1276.md)**
|
||
- 🔧 **[LoRa32 V1.6.1 Quick Start](./docs/en/t3_v161_sx1276/t3_v161_sx1276_hw.md)**
|
||
- 🔧 **[LoRa32 TCXO Quick Start](./docs/en/t3_tcxo_sx1276/t3_tcxo_sx1276_hw.md)**
|
||
- 🔧 **[T3-C6 Quick Start](./docs/en/t3_c6_sx1262/t3_c6_sx1262_hw.md)**
|
||
- 🔧 **[T3-S3-SX1262 Quick Start](./docs/en/t3_s3_sx1262/t3_s3_sx1262_hw.md)**
|
||
- 🔧 **[T3-S3-LR1121 Quick Start](./docs/en/t3_s3_lr1121/t3_s3_lr1121_hw.md)**
|
||
- 🔧 **[T3-S3-LR1121 PA Version Quick Start](./docs/en/t3_s3_lr1121_pa/t3_s3_lr1121_pa_hw.md)**
|
||
- 🔧 **[T3-S3-SX1280 Quick Start](./docs/en/t3_s3_sx1280/t3_s3_sx1280_hw.md)**
|
||
- 🔧 **[T3-S3-SX1280PA Quick Start](./docs/en/t3_s3_sx1280pa/t3_s3_sx1280pa.md)**
|
||
- 🔧 **[T3-S3-SX1276 Quick Start](./docs/en/t3_s3_sx1276/t3_s3_sx1276_hw.md)**
|
||
- 🔧 **[T3-S3-SX1278 Quick Start](./docs/en/t3_s3_sx1278/t3_s3_sx1278_hw.md)**
|
||
|
||
## `2` Example description
|
||
|
||
```bash
|
||
./examples/
|
||
├── ArduinoLoRa # Only support SX1276/SX1278 radio module (仅支持 SX1276/SX1278 无线电模块)
|
||
│ ├── LoRaReceiver
|
||
│ └── LoRaSender
|
||
├── Display # Only supports TBeam TFT Shield
|
||
│ ├── Free_Font_Demo
|
||
│ ├── TBeam_TFT_Shield
|
||
│ ├── TFT_Char_times
|
||
│ └── UTFT_demo
|
||
├── GPS # T-Beam GPS demo examples
|
||
│ ├── TinyGPS_Example
|
||
│ ├── TinyGPS_FullExample
|
||
│ ├── TinyGPS_KitchenSink
|
||
│ ├── UBlox_BasicNMEARead # Only support Ublox GNSS Module
|
||
│ ├── UBlox_NMEAParsing # Only support Ublox GNSS Module
|
||
│ ├── UBlox_OutputRate # Only support Ublox GNSS Module
|
||
│ └── UBlox_Recovery # Only support Ublox GNSS Module
|
||
├── LoRaWAN # LoRaWAN examples
|
||
│ ├── LMIC_Library_OTTA
|
||
│ └── RadioLib_OTAA
|
||
├── OLED
|
||
│ ├── SH1106FontUsage
|
||
│ ├── SH1106GraphicsTest
|
||
│ ├── SH1106IconMenu
|
||
│ ├── SH1106PrintUTF8
|
||
│ ├── SSD1306SimpleDemo
|
||
│ └── SSD1306UiDemo
|
||
├── PMU # T-Beam & T-Beam S3 PMU demo examples
|
||
├── RadioLibExamples # RadioLib examples,Support SX1276/78/62/80...
|
||
│ ├── Receive_Interrupt
|
||
│ └── Transmit_Interrupt
|
||
├── Sensor # Sensor examples,only support t-beams3-supreme
|
||
│ ├── BME280_AdvancedsettingsExample
|
||
│ ├── BME280_TestExample
|
||
│ ├── BME280_UnifiedExample
|
||
│ ├── PCF8563_AlarmByUnits
|
||
│ ├── PCF8563_SimpleTime
|
||
│ ├── PCF8563_TimeLib
|
||
│ ├── PCF8563_TimeSynchronization
|
||
│ ├── QMC6310_CalibrateExample
|
||
│ ├── QMC6310_CompassExample
|
||
│ ├── QMC6310_GetDataExample
|
||
│ ├── QMC6310_GetPolarExample
|
||
│ ├── QMI8658_BlockExample
|
||
│ ├── QMI8658_GetDataExample
|
||
│ ├── QMI8658_InterruptBlockExample
|
||
│ ├── QMI8658_InterruptExample
|
||
│ ├── QMI8658_LockingMechanismExample
|
||
│ ├── QMI8658_MadgwickAHRS
|
||
│ ├── QMI8658_PedometerExample
|
||
│ ├── QMI8658_ReadFromFifoExample
|
||
│ └── QMI8658_WakeOnMotion
|
||
|── T3S3Factory # T3 S3 factory test examples
|
||
└── Factory # T-Beam & T-Beam S3 and BPF factory test examples
|
||
```
|
||
|
||
## `3` Use reference
|
||
|
||
| Product | Youtube link | explanation | Status |
|
||
| :-----------: | :---------------------------------------------------------: | :-------------------------------------------------------------------------------------------------------------: | :----: |
|
||
| T -BEAM | [Youtube link](https://www.youtube.com/watch?v=Xf1Wf-aTSmc) | How do I drive the T-Beam display How to use T-Beam for positioning,How to use T-Beams for communication test | ✅ |
|
||
| LilyGo device | [Youtube link](https://www.youtube.com/watch?v=f3BybP3L7ls) | How to enter boot mode to download the firmware | ✅ |
|
||
|
||
## `4` TTN
|
||
|
||
To access TTN (The Things Network), please refer to [LilyGo_LoRa_Series_Quick_Start](./docs/zh/LilyGo_LoRa_Series_Quick_Start_On_TTN_zh.md)
|